Elektronika i płytki PCB

The Schneider Electric TeSys K contactor, model LC1K06105B7, is a robust and compact solution designed for motor control applications. It can handle up to 6A/690V AC-3 (2.2kW@400V) with a 24V 50/60Hz AC coil. The contactor features a built-in auxiliary contact and is available in a 1NO configuration, making it suitable for a wide range of applications. The TeSys K contactor is designed to operate reliably under demanding conditions, with an operating rate of up to 600 cycles/hour and a maximum temperature of 50°C. It is compact in size (45mm width) and can be mounted on DIN-rail or via screw fixing. This contactor has been certified to multiple international standards, including IEC, UL, CSA, CCC, and EAC, and is RoHS/REACh compliant. It is a Green Premium product, ensuring that it meets the highest environmental standards.

The SIMATIC RF200 Reader RF220R is a robust device designed for reliable and efficient wireless communication. Equipped with an RS422 interface (model 3964R), this reader offers enhanced data transmission capabilities while maintaining a high level of durability, with an IP67 rating and a temperature range of -25 to +70 °C.The device features a compact design with dimensions of M30 x 71mm, making it suitable for various industrial applications. The integrated antenna ensures optimal signal strength and coverage, enhancing the overall performance of the reader.

The AC-3 power contactor is an industrial-grade component designed for high power applications. It boasts a rating of 25A and 11kW at 400V, making it suitable for a wide range of industrial environments. The contactor features 2 normally open (NO) and 2 normally closed (NC) contacts, ensuring reliable operation in various conditions. With a DC voltage of 24V, this contactor is versatile and adaptable to different power requirements. The contactor comes with plugged-in diode assemblies, providing added protection against electrical surges. This 3-pole design allows for easy integration into existing systems, while the screw terminal permanent auxiliary switch enhances its functionality in Suva applications. With a size S0 and a captive auxiliary switch, this contactor is both compact and user-friendly.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 480 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This solid-state contactor is designed for 3-phase power distribution, offering a robust solution with enhanced performance characteristics. It boasts a rating of 20A and operates within the voltage range of 48-600V. The device is compatible with DC voltages ranging from 4 to 30V, making it versatile for various applications.The contactor features a spring-type terminal, which enhances its durability and reliability. It also has a blocking voltage capability of up to 1200V, ensuring safe operation under high voltage conditions. This solid-state contactor is a reliable choice for AC power distribution, providing efficient and controlled power management.

TeSys Giga high power contactor, 3 poles (3 NO) for category AC-3 applications up to 225A 132kW@440V. It provides a 48-130V AC/DC wide band low consumption electronic coil and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 255mm x 108mm x 175mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

The AC-3 power contactor is designed for high power applications with a rating of 95 A and a maximum power handling capacity of 45 kW / 400 V. This industrial-grade contactor features 1 normally open (NO) and 1 normally closed (NC) contacts, making it suitable for a wide range of applications.The AC-3 contactor is designed to operate at 24 V DC, providing reliable and efficient power control in your system. It also comes with screw terminals for easy installation and an integrated varistor for surge protection.This contactor is available in size S3 and is suitable for 2 A PLC outputs, making it a versatile choice for various industrial automation applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 440 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The Schneider Electric TeSys D Capacitor Contactor is a robust solution designed for switching 3-phase capacitor banks with a maximum capacity of 30kVAR at 400V/50Hz. This compact (55mm width) device features a 230V AC coil operating at 50/60 Hz, ensuring seamless integration into various environments. With its 1NO+2NC instantaneous auxiliary contacts and front-mounted early make poles, the TeSys D Capacitor Contactor provides reliable and efficient switching. It also comes with pre-wired damping resistors for current limitation, ensuring safe operation at rates up to 240 cycles/hour in environments up to 60°C. The TeSys D Capacitor Contactor is compliant with multi standards (IEC, UL, CSA) and adheres to the shunt capacitors standard IEC 60831. It is a Green Premium product, complying with RoHS/REACh directives.

Rezystor hamowania Schneider Electric jest kluczowym elementem zwiększającym wydajność napędów o zmiennej prędkości Altivar. Dzięki wartości omowej 16 omów w temperaturze 20°C rezystor ten skutecznie rozprasza energię hamowania, umożliwiając płynną pracę napędu podczas hamowania do zatrzymania. Ta funkcja zapewnia maksymalny moment hamowania przejściowego, zwiększając bezpieczeństwo i niezawodność operacji.Zaprojektowany do montażu zewnętrznego, ten rezystor hamowania ma solidną konstrukcję o stopniu ochrony IP20, dzięki czemu nadaje się do różnych środowisk przemysłowych. Waży 7 kg, jest łatwy w obsłudze i instalacji. Rezystor jest kompatybilny z szeroką gamą napędów Altivar, w tym z seriami ATV340, ATV900 i ATV950, zapewniając wszechstronne zastosowanie w różnych konfiguracjach.Aby zapewnić optymalną wydajność, rezystor jest wyposażony w zabezpieczenie termiczne za pośrednictwem przetwornicy lub przełącznika kontroli temperatury, co chroni przed przegrzaniem i zapewnia długowieczność. Przyłącza elektryczne zostały zaprojektowane z myślą o łatwości obsługi, mieszcząc zaciski do 10 mm² dla napędu i do 2,5 mm² dla przełącznika regulacji temperatury.Ten rezystor hamowania jest zgodny z różnymi normami środowiskowymi i bezpieczeństwa, w tym unijnymi przepisami RoHS i chińskimi RoHS, i jest wolny od toksycznych metali ciężkich i rtęci. Jest również zgodny z wymaganiami California Proposition 65, dzięki czemu jest bezpieczny do użytku w różnych regionach.

The UA1-230 Undervoltage Release is an essential component for safety and reliability in various industrial applications. It effectively prevents the manual motor starter from being switched on when its voltage supply is interrupted, ensuring safe operation during emergency switching circuits.This device is specifically designed to prevent automatic restarts after voltage interruption, providing a crucial safety measure in industrial settings. The UA1-230 is compatible with various manual motor starters such as MS116, MS132, and MS165, making it versatile for different applications.The UA1 Undervoltage Release is designed to be attached laterally on the left side of the compatible manual motor starters. This feature ensures easy integration into existing systems without compromising on safety or performance.

The Siemens AC3 Power Contactor is a robust solution designed to handle high power applications. With a capacity of 51A and an operating voltage of 22kW/400V, it offers reliable performance in demanding environments.This contactor features 2 NO + 2 NC contacts, providing versatile connectivity options. The voltage range spans from 20-33V AC/DC, ensuring compatibility with a wide range of power sources.To safeguard against overvoltage, the contactor is equipped with a varistor. This protective measure ensures that the device remains operational even in adverse conditions.Constructed with precision and durability in mind, this 3-pole contactor comes in size S2 and features screw terminal connections for easy installation. The captive auxiliary switch adds to its functionality, enhancing overall system performance.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 440 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca contact relay is a versatile component that can be utilized in a wide range of applications. This 4 pole IEC contactor, with its resistive load rating of 32A, offers reliable performance and efficient operation. The relay is equipped with two normally open (NO) and two normally closed (NC) power contacts, making it suitable for various control systems. The relay comes with a 48VDC coil, ensuring smooth operation and enhanced reliability. It also features an integrated auxiliary contact, providing additional functionality. The screw clamp terminals facilitate easy connection of load and auxiliary components. This open style contactor is designed for flexibility in mounting options. The TeSys Deca contact relay adheres to stringent quality standards, including UL, CSA, IEC, CCC, EAC, and Marine certifications. It also complies with RoHS/REACh regulations, making it an environmentally friendly choice. The compact dimensions of 3.58 inches in height, 1.77 inches in width, and 4.21 inches in depth ensure easy installation and space efficiency.

LC2D80E7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 80A AC-3 37kW@400V, it includes a 48V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D80E7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 37kW@400V. It includes a 48V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 182mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 48V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.2 million cycles at 80A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 300A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys F AC coil 220/230V 40-400Hz (voltage code M7/P7), low inrush consumption, short operating times, for TeSys F 3-pole and 4-pole contactors LC1 F400, FG400. To be associated with a rectifier DR5TF4U (to be ordered separately). It operates in the voltage limits 0.85-1.1 Uc and environments until 70°C. It provides to the contactor high operating rates until 3600 cycles/hour. Green Premium compliant (RoHS/REACh).

The AC3:37kW Contactor Relay is a robust electrical component designed to handle high power applications. With a rating of 80 A and a capacity of 37 kW at 400 V, it provides reliable switching for various industrial processes. Key Features: 2 Normally Open (NO) and 2 Normally Closed (NC) contacts for versatile control Operates at 24 V DC, ensuring efficient energy usage Incorporates a varistor for surge protection, enhancing its durability 3-pole design for enhanced reliability and performance Available in size S2, with screw terminals suitable for 2 A PLC outputs

ABB's 3-phase Contactor, Model CTR,3P,192A,250-500VAC/DC,1/1, is a versatile solution suitable for various applications including motor starting, isolation, by-pass and distribution. Operating within a wide control voltage range of 250-500 V, this contactor is compatible with both AC (50/60 Hz) and DC power sources.The CTR,3P,192A,250-500VAC/DC,1/1 model is designed to handle maximum voltages up to 1000 V. Its robust construction ensures reliable performance in demanding environments, making it an ideal choice for industrial applications.This contactor's unique design allows it to operate efficiently and effectively, providing a high level of safety and reliability. With its wide voltage range compatibility and high-voltage capability, the CTR,3P,192A,250-500VAC/DC,1/1 is a valuable addition to any industrial automation system.