Silniki elektryczne

The softstarter PSR16-600-11 has a rated maximum operational current of 16 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

Silnik Siemens SIMOTICS GP to solidny i wydajny silnik niskonapięciowy przeznaczony do szerokiego zakresu zastosowań przemysłowych. Dzięki mocy znamionowej 0,25 kW przy 50 Hz i 0,29 kW przy 60 Hz silnik ten zapewnia niezawodną wydajność i efektywność energetyczną. Silnik jest wyposażony w wirnik klatkowy i jest samowentylowany, co zapewnia optymalne chłodzenie i wydłużoną żywotność.Zbudowany z aluminiowej obudowy, silnik zapewnia stopień ochrony IP55, dzięki czemu nadaje się do użytku w trudnych warunkach. Klasa temperaturowa 155(F) zgodnie z 130(B) zapewnia bezpieczną pracę w różnych warunkach termicznych. Silnik został zaprojektowany z mocowaniem kołnierzowym (IM B5) i skrzynką zaciskową umieszczoną u góry, co ułatwia instalację i konserwację.Zgodny ze standardową wydajnością IE1, silnik Siemens SIMOTICS GP jest idealnym wyborem do zastosowań wymagających niezawodnej i wydajnej wydajności. Jego wszechstronność i trwałość sprawiają, że nadaje się do stosowania w różnych gałęziach przemysłu, w tym w produkcji, przetwórstwie i automatyzacji.

The softstarter PSE142-600-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The PSE18-600-70 Softstarter has a rated maximum operational current of 18 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSR30-600-11 has a rated maximum operational current of 30 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The softstarter PSE30-600-70 has a rated maximum operational current of 30 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The ABB PSTX210-600-70 Softstarter is a versatile and reliable solution for medium to large-sized three-phase motors, designed to handle nominal currents ranging from 30 A to 1250 A in inline connection or 52 A to 2160 A in inside delta connection. This softstarter features a rated maximum operational current of 210 A with an operating voltage span from 208 V AC to 600 V AC, and a rated control voltage between 100 V AC to 250 V AC at 50/60 Hz. The PSTX softstarter offers a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It also features functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. The PSTX softstarter is equipped with a detachable full graphic display with IP66 and 4x outdoor rating, and offers four communication options: hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, built-in Fieldbus communication Modbus RTU, and optional ANYBUS modules with various protocols. The PSTX softstarter is the complete alternative for any motor starting application, suitable for typical applications such as pumps, fans, compressors, and conveyors.

Silnik serwo dużej mocy firmy Omron R88M1M10030TS2 to przemysłowy silnik serwo produkowany przez firmę Omron. Ten kompaktowy i wydajny silnik jest przeznaczony do stosowania w zautomatyzowanych systemach, które wymagają precyzyjnego i dynamicznego sterowania ruchem. Charakteryzuje się rozmiarem kołnierza 60 mm, znamionową mocą wyjściową 1 kW i maksymalną prędkością 3000 obr./min. Silnik jest wyposażony w enkoder o wysokiej rozdzielczości, który zapewnia dokładne sprzężenie zwrotne w celu precyzyjnej kontroli położenia. Dodatkowo posiada wbudowany hamulec, który zapewnia szybkie i bezpieczne zatrzymanie silnika w przypadku zaniku zasilania. R88M1M10030TS2 jest kompatybilny z różnymi serwonapędami firmy Omron i nadaje się do stosowania w szerokim zakresie zastosowań przemysłowych, takich jak pakowanie, drukowanie i transport materiałów.Osiągnij doskonałą kontrolę ruchu dzięki serwomotorowi firmy Omron R88M1M10030TS2 Doświadczniezrównanej precyzji i dynamicznej wydajności dzięki Omron R88M1M10030TS2, wysokowydajnemu serwomotorowi prądu przemiennego z zaawansowanej serii 1S. Ten kompaktowy i mocny silnik jest idealnym rozwiązaniem dla systemów automatyki przemysłowej wymagających precyzyjnego pozycjonowania, szybkiego przyspieszania i niezawodnej pracy. Dzięki zintegrowanemu enkoderowi o wysokiej rozdzielczości i bezproblemowej kompatybilności z platformą automatyzacji Sysmac firmy Omron, R88M1M10030TS2 upraszcza konstrukcję maszyny i zwiększa produktywność.Kluczowe cechy i zalety:Wysoka precyzja pozycjonowania: Wyposażony w 23-bitowy enkoder absolutny, silnik ten zapewnia wyjątkową dokładność pozycjonowania, co ma kluczowe znaczenie dla zastosowań w pakowaniu, etykietowaniu i produkcji półprzewodników.Dynamiczna wydajność: Dzięki prędkości znamionowej 3000 obr./min i szczytowemu momentowi obrotowemu 1,11 Nm zapewnia szybki i responsywny ruch potrzebny w maszynach o dużej przepustowości.Kompaktowa i wydajna konstrukcja: Mały kołnierz 40 mm i moc znamionowa 100 W pozwalają na wysoką wydajność w kompaktowej obudowie, idealnej do zastosowań o ograniczonej przestrzeni.Zwiększone bezpieczeństwo: Ten model zawiera wbudowany hamulec (wersja S2), zapewniający bezpieczne utrzymanie ładunku w pozycji podczas przerwy w dostawie prądu lub zatrzymania awaryjnego, chroniąc zarówno sprzęt, jak i personel.Bezproblemowa integracja: Zaprojektowany do użytku z serwonapędami serii Omron 1S i komunikacją EtherCAT, pozwala na szybką, niezawodną i uproszczoną konfigurację systemu.Zastosowania:Omron R88M1M10030TS2 doskonale nadaje się do szerokiej gamy wymagających zastosowań, w tym:Pakowanie i paletyzacjaPrzenoszenie i transport materiałówSystemy drukowania i etykietowaniaZautomatyzowany montaż i kontrolaRobotyka i siłowniki

The Fanuc AC Servo Motor A06B-0236-B400 is a high-performance motor designed to meet the demands of various industrial applications. With its versatile features and reliable performance, this servo motor is part of the renowned A06B-0236 series.Key Features:Tapered Shaft (TPR) for smooth and efficient operationSlick Shaft (SLK) for minimal friction and enhanced performanceStraight (ST) configuration for a streamlined design24V Brake (BRK) for added safety and controlIntegrated a1000 technology for reliable and precise performancePerfect for:ManufacturingAutomationIndustrial machinery

The Omron 3G3MX2-AB004-E Vector Inverter is designed for advanced motor control applications, offering precise and reliable performance. This inverter supports both induction and permanent magnet motors, providing current vector control and high starting torque of 200% at 0.5 Hz. With its dual rating for heavy and normal duty, it ensures optimal performance under varying load conditions.Equipped with built-in application functionality such as brake control and positioning, the 3G3MX2-AB004-E also features embedded safety compliant with ISO13849-1. The inverter supports various fieldbus communications including Modbus, DeviceNet, Profibus, CompoNet, EtherCAT, ML-II, and EtherNet/IP, making it highly versatile for integration into different systems.Programming and configuration are simplified with the USB port for PC programming and the CX-Drive software. The inverter also includes a 24 VDC backup supply for the control board, ensuring continuous operation during power interruptions. The robust design, with IP20 protection and a wide operating temperature range, makes it suitable for demanding industrial environments.

The SIEMENS Incremental Encoder Model 1XP8012-10/1024 is a reliable solution for accurate measurement of rotary positions and speeds in various industrial applications. This silver-finished encoder (Model: 1XP8012-10/1024, ID. No.: 597 331-02) features a compact 12mm diameter and operates on a 24 V DC power supply.Designed for easy integration, it provides a 5 V DC low-level signal with a high resolution of 1024 pulses per revolution (PPR). The hollow shaft design simplifies mounting, while the 12 pins offer comprehensive connectivity. With an IP66 protection degree, this encoder is resistant to dust and strong water jets, making it suitable for demanding environments.

Serwomotor synchroniczny SIMOTICS S 1FT6 jest przeznaczony do zastosowań o wysokiej precyzji i dynamice. Dzięki momentowi obrotowemu 13 Nm i prędkości obrotowej 3000 obr./min silnik ten zapewnia optymalną wydajność w wymagających środowiskach. Charakteryzuje się naturalnym chłodzeniem i stopniem ochrony IP65, dzięki czemu nadaje się do użytku w trudnych warunkach. Silnik jest wyposażony w enkoder absolutny EnDat 2048 S/R do dokładnego sprzężenia zwrotnego położenia i sterowania. Kierunek wylotu złącza to osiowy NDE i zawiera hamulec przytrzymujący dla zwiększenia bezpieczeństwa i kontroli. Silnik ten jest zgodny ze standardami montażu IM B5 (IM V1, IM V3), zapewniając wszechstronne opcje instalacji.Ten produkt jest częścią zamienną i jest dostępny do szybkiej dostawy, wymiany lub naprawy. Aby uzyskać więcej informacji, skontaktuj się z lokalnym biurem firmy Siemens lub partnerem w zakresie części zamiennych i napraw.

The softstarter PSR45-600-11 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is 24 V AC/DC. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The PSE45-600-70 softstarter is a versatile solution designed for three-phase motors with nominal currents ranging from 18 to 370 A. It offers a high starting capacity while maintaining cost efficiency, making it suitable for a wide range of applications such as pumps, fans, compressors, and conveyors.This softstarter has a rated maximum operational current of 45 A with an operating voltage span from 208 to 600 V AC. The control voltage ranges between 100 and 250 V AC at 50/60 Hz, providing a two-phase control for smooth start and stop operations through a voltage or torque ramp.The PSE features built-in bypass for easy installation and energy saving. It also has an illuminated display that uses symbols to become language neutral, allowing for easy interaction with the softstarter. As an option, you can add an identical external keypad with a rating of IP66.Communication with the PSE can be done through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can be connected using an external adaptor and a Fieldbus plug.

The LE4D12V7 is a top-of-the-line industrial automation product from Schneider Electric. This component boasts exceptional functionality and reliability, making it an essential tool for any industrial setting. With its sleek design and advanced features, the LE4D12V7 is capable of seamlessly integrating into any existing automation system, providing unparalleled performance and precision. This product is engineered to meet the demands of even the most complex industrial applications, ensuring maximum efficiency and productivity. Whether you're looking to increase throughput, reduce downtime, or simply streamline your processes, the LE4D12V7 is the perfect automation solution for your business. Trust Schneider Electric to deliver the highest quality products and support, and invest in the future of your operations with the LE4D12V7.

The Siemens SIMOTICS S Synchronous Servo Motor 1FT6 is a high-performance motor designed for applications that demand precise motion control. With a torque of 27 Nm and a speed of 3000 rpm, this servo motor ensures efficient and reliable operation in various industrial settings.Key Features:27 Nm torque3000 rpm speedIP65 protection classIncremental encoder sin/cos 1 VSS 2048 S/RAxial NDE connector outlet directionHolding brake includedSuitable for:Automation systemsRoboticsMachine toolsPackaging machineryManufactured in Germany, this servo motor complies with the RoHS directive and is classified under ECCN: N_CNDU / AL: N for export control regulations. It is a dependable choice for applications requiring high precision and durability.

The 3HNE00313-1, an advanced motor control unit by ABB, is specifically engineered for industrial automation. This robust device offers precise and reliable motor control in challenging environments. It supports both AC and DC motors and features a user-friendly interface for straightforward programming and configuration.The 3HNE00313-1 includes advanced safety features such as overcurrent and overvoltage protection, along with fault detection and diagnostic capabilities. Its compact design and rugged construction make it suitable for various industrial automation applications, including robotics, machine tools, and material handling systems.

The SINAMICS Double Motor Module is a high-performance motor module designed for industrial applications. It features an input of 600 V DC and an output of 3-phase 400 V, 3 A/3 A, making it suitable for a wide range of motor control tasks.Key Features:Input: 600 V DCOutput: 3-phase 400 V, 3 A/3 AInternal air coolingIncludes DRIVE-CLiQ cablePerfect for:Industrial automationMotor control systemsManufacturing processes

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 140A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 125hp (at 575V) / 110kW (at 690V) for standards applications and 100hp (at 575V) / 90kW (at 690V) for severe applications. It weighs 12.4kg and its dimensions are, 200mm wide, 340mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

The PSR72-600-70 softstarter boasts a rated maximum operational current of 72 A, accommodating a wide operating voltage span from 208...600 V AC. It is equipped with a two-phase control soft start and stop through a voltage ramp, ensuring smooth motor operation. The softstarter features an integrated bypass for easy installation and energy savings. A RUN and TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time can be easily set using three potentiometers on the front panel. This softstarter is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available. An alternative option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.