Styczniki i przekaźniki

The Single relay REL-MR- 24DC/21HC/MS is a compact plug-in miniature relay designed for versatile applications. It operates at a nominal input voltage of 24 V DC, with an input voltage range of 19.2 V DC to 52.8 V DC. The relay features a monostable drive mechanism and is non-polarized, ensuring ease of integration into various circuits.With a mechanical service life of up to 5 million cycles, this relay is built for durability. It includes a test button, a mechanical switching position indicator, and a status LED for operational transparency. The contact configuration consists of one changeover contact, made from AgNi material, allowing for robust switching capabilities with a maximum switching voltage of 250 V AC/DC and a limiting continuous current of 16 A.Notably, the relay supports a maximum inrush current of 32 A over a brief duration of 20 ms, and exhibits a typical response time of 9 ms alongside a release time of 6 ms. The contact switching type is a single contact, and the interrupting rating for ohmic load is rated at 4000 VA for 250 V AC.In terms of environmental resilience, the relay operates effectively in ambient temperatures ranging from -40 °C to 70 °C and can withstand storage or transport conditions between -40 °C and 85 °C. Compliance with EN 61810-1 standards ensures reliability in demanding applications. The product is identified under the designation code REL-MR- 24DC/21HC/MS.

This contactor operates effectively at 160 kW for AC-3 applications at 400 V and is designed for both AC and DC operation, specifically at control supply voltages of 110 V. It includes a total of three main contacts, all normally open, along with two normally open and two normally closed auxiliary contacts. This configuration allows for versatile operational setups in various applications.Rated for a maximum operation current of 270 A under AC-3 conditions and 330 A under AC-1 conditions at 400 V, this device emphasizes its capability to handle significant loads. The modular design facilitates integration into existing systems, while the conventional screw terminal connection type ensures reliable and straightforward installation.Additionally, this contactor is compliant with NEMA standards, specifically designed for use in environments that require robust performance. The connections utilize busbar configurations, which enhance electrical efficiency and reliability.

This three-pole contactor operates at a rated current of 150 A and is designed for AC-3 applications with an operating power of 75 kW at 400 V. It features a control voltage range of 23-26 V, supporting both AC and DC operations.The device includes two normally open and two normally closed auxiliary contacts (2 NO + 2 NC) and utilizes conventional spring-loaded terminal connections. It is not designed for mounting onto standard rails, and its connection type is a connecting rail.With a rated operational power of 105 kW at AC-1 and a power loss of 9 watts per pole under load, this contactor effectively manages power distribution. The model is compliant with relevant specifications for industrial control applications and is suitable for series installation.

The CR-M125DC4 is a miniature interface relay designed for pluggable applications, functioning with a rated control supply voltage of 125 V DC. It is equipped with four changeover (SPDT) contacts, each rated for 250 V at a maximum current of 6 A. The relay includes a built-in blue test button that allows for manual actuation and locking of the output contacts, ensuring operational reliability.Measuring 21.2 mm in width, 35.6 mm in height, and 27.5 mm in depth, the relay has a net weight of 0.033 kg. It features flat-pin connections for terminal types and is compliant with various standards including CAN/CSA C22.2 No.14 and IEC/EN 61810-1.With a degree of protection rated at IP40, the relay can operate in ambient temperatures ranging from -40 to +70 °C, making it suitable for diverse environments. The product is compliant with RoHS as per EU Directive 2011/65/EU and Amendment 2015/863, confirming its adherence to environmental standards. For further integration, standard sockets and additional accessories are available.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200-208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 40A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.73 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactor is a versatile solution for creating motor starters in diverse applications. It boasts a 4-pole design with a resistive load rating of 60A, making it suitable for a wide range of applications. This contactor can be mounted on DIN rail or directly to a panel and features four normally open power contacts. The TeSys D contactor is available in multiple ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. It comes with a 110 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The contactor is designed for easy installation, with screw clamp terminals for load and auxiliary connections. Its compact dimensions (4.80 inches tall, 2.76 inches wide, and 4.72 inches deep) make it suitable for various panel configurations. It weighs 2.40 lbs and is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. The TeSys D contactor meets the requirements of RoHS/REACh, making it a Green Premium product. Its extensive line of accessories ensures that it can meet the needs of most applications.

PLC-INTERFACE as an electronic reversing load relay, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and integrated circuit, for driving DC motors, with LED display and protective circuit, output: 10 ... 30 V DC/2 A

This Modicon MCM safe input expansion module has 16 digital inputs, 4 test output and is fitted with captive screw clamp terminals. It is designed to monitor remotely your safe I/O. It provides 16 isolated digital inputs and 4 PNP test outputs for line control. It is furnished with screw clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. This safe I/O module figures configurable filters and delays for each single input. This module figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, input and output status). This safe I/O module is connected to the safety controller via the backplane expansion connector. It weighs 0.25kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This safe I/O module is certified by RCM, CULus and TÜV. It can reach such safety levels as category 4 conforming to EN/ISO 13849-1, PLe conforming to EN/ISO 13849-1, Type 4 conforming to EN/IEC 61496-1, and SILCL3 conforming to IEC 62061. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The module instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.

This relay module, designated as RIF-1-RSC-LV-230AC/1X21MS, is designed for applications requiring reliable switching capabilities. It includes a relay base, retaining bracket, plug-in interference suppression module, and a power contact relay equipped with a test button and integrated status LED. The module operates at a nominal input voltage of 230 V AC, with a specified input voltage range of 184 V AC to 253 V AC at 20 °C.With a mechanical life of approximately 5 million cycles, the relay is built for durability and features a safe isolation between input and output. The device operates under a 100% operating factor and is categorized under overvoltage category III and pollution degree 2, ensuring its reliability in various environments.The relay demonstrates a typical response time ranging from 4 ms to 12 ms and a release time between 4 ms and 20 ms. It supports a maximum switching voltage of 250 V AC/DC and a limiting continuous current of 8 A. The device is designed for screw connections, accommodating conductor cross-sections from 0.5 mm² to 4 mm² for rigid conductors, and is compliant with DIN EN 50178 standards.The relay module's ambient temperature range for operation spans from -40 °C to 50 °C, while storage and transport conditions can be as low as -40 °C and as high as 85 °C. The degree of protection is rated at IP20 for the relay base, making it suitable for various installation environments.

The power relay, with a nominal coil voltage of 24 VDC, is designed for industrial automation and control applications. Its 4PDT configuration allows for simultaneous control of multiple circuits, enhancing operational versatility. The relay's contacts are rated for 15A resistive at 277VAC, as well as 1/2hp at 120VAC and 1hp at 277VAC, making it suitable for a wide range of electrical loads.Featuring a clear cover for visibility, this relay utilizes silver alloy contacts, gold flashed, to minimize oxidation and prolong shelf life. The socket mounting with Faston terminals simplifies installation and maintenance. Additionally, the relay has a mechanical flag indicator for status signaling during operation and testing, ensuring reliable feedback.With a compact design, it measures 34.9 mm in height, 40.6 mm in width, and 27.3 mm in depth. The relay demonstrates robust performance with an electrical durability of 100,000 cycles for resistive loads and mechanical durability rated at 10,000,000 cycles. It operates effectively in ambient temperatures ranging from -40 to 55 °C and can withstand shock and vibration during operation.

D-SERIES DRW / DRH, Relay 1 NC contact and 1 NO contact with blow-out magnet and test button AgSnO2, Rated control voltage: 220 V DC, Continuous current: 16 A, Flat blade connections (4.8 mm x 0.5 mm)

The relay module, designated as RIF-1-RSC-LDP-24DC/1IC, is engineered for applications requiring high inrush currents. It supports a maximum inrush current of 130 A peak and 80 A for a duration of 20 ms. The input voltage range spans from 19.2 V DC to 33.6 V DC, with a nominal input voltage of 24 V DC.This module is constructed with a relay base, a power contact relay, a plug-in display/interference suppression module, and a retaining bracket. It features a single normally open contact and operates with a typical input current of 18 mA. The response time is approximately 8 ms, and the release time is about 10 ms, ensuring prompt operation.In terms of electrical specifications, the device showcases a rated insulation voltage of 250 V AC and a rated surge voltage of 6 kV. The contact material is AgSnO, and it allows for a maximum switching voltage of 250 V AC/DC. The module is designed to meet the rigorous standards set by IEC 60947-5-1, ensuring reliable performance under various conditions.With an ambient operating temperature range of -40 °C to 70 °C and a storage/transport temperature range of -40 °C to 85 °C, this relay module is suitable for diverse environments. It is mounted using a DIN rail and can be installed in any position, making it versatile for different applications.

The RS 32 24-48VUC LD LP 2U relay module features two CO contacts made of AgNi 90/10 material, designed for reliable switching in various applications. This module operates within a rated control voltage range of 24 V UC ±10 % to 48 V UC ±10 % and supports a continuous current of 4 A. The dimensions of this module include a width of 25 mm (0.984 inch), height of 70 mm (2.756 inch), and depth of 63.5 mm (2.5 inch), with a net weight of 45.68 g.Connection is facilitated through a screw method, accommodating wire sizes from 0.5 mm² to 4 mm² with a stripping length of 8 mm. The relay module is designed for a mechanical service life of up to 30 million switching cycles, ensuring durability. The rated switching voltage is 250 V AC with a maximum switching capacity of 2000 VA for resistive loads. Additionally, it incorporates a status indicator in the form of a red LED.This relay module adheres to various standards, including DIN EN 50178, and is compliant with CE and EAC approvals. Its environmental compliance includes REACH SVHC for lead (7439-92-1). The operating temperature range spans from -25 °C to 40 °C, while storage temperatures can be maintained between -40 °C and 60 °C. The module is rated for pollution severity level 2 and has an IP20 protection degree.

TIMING RELAY, ELECTRONIC, OFF-DELAY, WITHOUT CONTROL SIGNAL OR NON-VOLATILE RELAY DEFINITE PASSING MAKE CONTACT, 7 T. SET. RANGES 0.05...600S, AC/DC 12-240 V, AT 50/60HZ AC, 2 CO CONTACTS, W. LED, SPRING-TYPE (PUSH-IN) TERMINAL

This contactor is suitable for motor control applications up to 12A and 690V AC-3, equivalent to 4kW at 440V. Additionally, it can handle non-inductive loads up to 20A at 690V AC-1. It includes a 110V DC coil and a built-in normally open auxiliary contact. Designed for reliable performance, it operates effectively within environments of up to 50°C and can manage operational rates of up to 600 cycles per hour.With a compact width of 45mm, this device can be mounted on a DIN rail or directly via screw fixing. It is compliant with multiple standards, including IEC, UL, CSA, CCC, and EAC, ensuring its versatility for various applications. The contactor is rated IP2X for protection and operates efficiently in temperatures ranging from -25°C to 50°C.In terms of technical specifications, it has a rated operational current of 12A at 440V AC and supports a variety of motor power ratings, including 3kW at 220-230V AC and 5.5kW at 380-415V AC. Its mechanical durability is rated at 10 million cycles, and the electrical durability is approximately 1.3 million cycles for 12A AC-3 at 440V. The device also features screw clamp terminals for easy connectivity and has an insulation resistance greater than 10 MOhm for the signaling circuit.

The TeSys D contactor is a versatile component that can be used to create motor starters for various applications. It is available in 13 contactor ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 25A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel. It is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC, and 20HP at 600VAC three phase. For single phase applications, it is rated for 2HP at 115VAC and 3HP at 240VAC. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, it can have a SCCR up to 100kA. The contactor is supplied with a 415 VAC 50/60 Hz coil and has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. The contactor is 3.35 inches tall, 1.77 inches wide, and 3.62 inches deep, weighing 0.82 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh.

The IEC contactor is designed for integration into control systems, suitable for motor starters across diverse applications. This model supports inductive loads up to 150 full-load amps and resistive loads up to 200 amps. It features a three-pole configuration with three normally open contacts and is compatible with a 480VAC coil, operating at 50/60Hz. With a robust rating, it can handle up to 100HP at 480VAC, making it ideal for high-power motor control scenarios.Mounting options include DIN rail or direct panel installation, and it is equipped with screw clamp terminals for secure load and auxiliary connections. The contactor's short-circuit current rating (SCCR) reaches up to 100kA when paired with appropriate circuit protection devices. Auxiliary contacts include one normally open and one normally closed, with the latter mirroring certified for reliability.Dimensions for this contactor are 158mm in height, 120mm in width, and 136mm in depth, weighing approximately 2.5kg. The product adheres to various standards including UL, CSA, IEC, and is classified as a Green Premium product due to its compliance with environmental regulations such as RoHS/REACh.

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V). It provides 24V DC coils with transient suppressor module, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), connection by spring terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

Our safety relay is a robust solution designed for emergency stop and door monitoring applications, meeting the highest safety standards such as SIL 3 or Cat. 4, PL e (EN ISO 13849). It offers one- or two-channel operation with automatic or manual activation, providing flexibility in use. The relay features multiple normally open (N/O) and normally closed (N/C) contacts, ensuring reliable operation. Additionally, it includes a dropout delay feature ranging from 0.2 s to 300 s for various applications. The relay comes with a pluggable Push-in terminal block for easy installation. This safety relay is an essential component in ensuring the safety of your machinery and personnel.

The contactor is designed with three poles (3NO) and is capable of handling a rated operational current of 150A at 690V AC-3, making it suitable for motor control applications up to 75kW at 400V. It operates with a control circuit voltage of 24V DC and features bolt terminals for connections with bars or cables. This unit supports high operational rates of up to 2400 cycles per hour and can function effectively in environments with temperatures reaching 55°C, ensuring reliability and durability. Installation and maintenance are facilitated by its drawer-mounted coil and the availability of a variety of add-on blocks and accessories, which are sold separately. The product is certified to multiple standards, including IEC, UL, and CSA, and is compliant with Green Premium requirements (RoHS/REACh). The rated insulation voltage is 1000V as per IEC 60947-4-1, and the contactor features a rated breaking capacity of 1200A according to the same standard.