Zasilanie

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 1.1KW with 150% overload for 60sec integrierter filter c3 i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection IP20/ ul open type size fsa 90x166x146(hxwxd)

TeSys U standard control unit to be inserted in power bases LUB12, LUB32, LUB38 to form a TeSys U starter controller, for 3-phase motor applications up to 0.25kW@400V. It provides full protection to motors with a rated current Ir 0.35-1.4A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). To be used with a 24V AC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The PM240P-2 Power Module operates with a 3AC input voltage range of 500V to 690V and a frequency of 47-63Hz. It features a high overload capability of 15kW for 150% for 60 seconds and 100% for 240 seconds at ambient temperatures ranging from -20 to +50 degrees Celsius. For low overload operations, it can deliver 18.5kW for 135% for 3 seconds, 110% for 57 seconds, and 100% for 240 seconds at temperatures between -20 and +40 degrees Celsius.With dimensions of 472 x 200 x 237 mm (H x W x D) and a weight of 19 kg, this module is designed with an IP20 protection rating, ensuring it is suitable for industrial applications. The PM240P-2 is equipped with a U converter design for frequency conversion and does not include a brake chopper. It is approved for use with CU firmware version V4.7 SP6 HF1.

This Altivar 320 variable speed drive can feed single-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 200V to 240V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The ATV900 series variable speed drive operates within a supply voltage range of 500Vac to 690Vac, catering to industrial processes in sectors such as oil and gas, mining, and food and beverage.Designed to manage synchronous and asynchronous motors, this drive offers significant control over motor performance and coupling configurations in master/slave setups. Notably, it can handle overloads of up to 120% for normal duty and 150% for heavy duty applications.With advanced connectivity options including EtherNet/IP and Modbus TCP, the drive integrates seamlessly into existing automation systems. Its features include data logging and a web server for rapid troubleshooting and preventive maintenance, ensuring operational continuity even during network disruptions.Noteworthy specifications include a continuous output current rating of 34A at 4kHz for normal duty and 29A for heavy duty, alongside a maximum output frequency of 599Hz. The drive also incorporates a braking chopper and is enclosed (IP21), suitable for vertical mounting.

This Schneider Electric Altivar Profibus DP communication module has 1 x 9-way female SUB-D connector. It complies with PROFIBUS DP V1 standard. This communication module enables integration of your drive in your Profibus process control network. It is simple to install and remove from Altivar drives thanks to its modular withdrawable design. It is compatible with Altivar Process ATV600 (ATV630, ATV650)Altivar Process ATV900 (ATV930, ATV950), Lexium 32, Altivar Easy 610, Altivar 32, Altivar Machine ATV340 and Altivar Machine ATV320. Removable module allows last minute decisions on drive communication protocol, facilitates installation project management. It weighs 140g.

This HTL encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 1.1kW / 1.5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

This digital encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.

The SIRIUS Soft Starter is a robust solution designed to handle the demands of industrial environments. With a rating of 36A and 18.5kW, it provides efficient and reliable operation at 400V and 40°C. The soft starter features screw terminals for easy connection, making it compatible with a wide range of applications from 200-460V AC to 230V AC. This model is no longer available. We recommend the SIRIUS 3RW5 as its successor. The preferred type is SIRIUS 3RW5517-1HA14 for optimal performance and compatibility.

The MACX MCR-SL-RPSS-2I-2I serves as a 2-channel repeater power supply specifically designed for 2-conductor measuring transducers. It features an input range of 4 ... 20 mA for supplying and an active output of 4 ... 20 mA. The device facilitates bidirectional signal transmission while ensuring HART transparency.Designed with operational resilience in mind, it maintains electrical isolation between input and output, allowing for secure signal processing. The step response is notably swift, achieving less than 1.3 ms for a 4 mA to 20 mA transition. Additionally, the transmission error is kept minimal, typically below 0.05% of the final value at 20 mA.Constructed for durability, the product meets various standards including EN 61000-6-4, and operates effectively within an ambient temperature range of -40 °C to 42 °C. It is equipped with a screw connection method, accommodating conductor cross-sections from 0.2 mm² to 2.5 mm². The device's compact dimensions, measuring 12.5 mm in width, 112.5 mm in height, and 113.7 mm in depth, allow for easy integration into existing setups.

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 0.37kW / 0.5hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

This processor module is part of the Modicon M340 range, an offer of Programmable Automation Controllers (PAC). It offers a maximum of 2 rack configuration, 20 application specific channels and 11 slots. It is a module with a current consumption of 72mA at 24V DC, works with internal power supply. This product is robust, high quality and based on the latest innovative technology. Communication processor module interfaces are 2 Ethernet modules and 2 AS-Interface modules. It is supplied with a memory card for backup of programs, constants, symbols and data. It is an IP20 rated product. The module has 512 multi-rack configuration discrete I/O processor capacity and 128 multi-rack, 66 single-rack configuration analog I/O processor capacity. It supports 128kb data, 2048kb, 1792kb program internal RAM memory capacity. It weighs 0.2kg. It is suitable for process industries, renewable energies, water, cement, manufacturing, infrastructures and machines applications. This product is certified by CE. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This processor module is compatible with Modicon M340 Programmable Logic Controllers (PLC). It is delivered in 2 packages (PCE and SO2 types). Compact-shaped, Modicon M340 offers in small box flexibility and integrated functions. In the heart of process, it provides you plug and work solutions with both Schneider Electric and third party devices.

The CP-E 12/2.5 power supply operates within an input voltage range of 85 to 264 V AC and 90 to 375 V DC, with a rated input voltage of 100 to 240 V AC. It provides a rated output power of 30 W, supplying 2.5 A at a nominal output voltage of 12 V DC, which can be adjusted between 12 and 14 V DC. This unit features a U/I output characteristic and supports parallel operation for redundancy, with an optional redundancy unit available.Designed for single-phase applications, the CP-E 12/2.5 adheres to various standards including ANSI/ISA-12.12 and UL 1310, ensuring reliable performance across diverse environments. The device is compatible with mounting on standard DIN rails (TH35-15 and TH35-7.5) according to IEC 60715.With an operational temperature range of -40 to +70 °C and a maximum permissible operating altitude of 5000 m, this power supply is suitable for demanding conditions. It also meets the requirements of the RoHS directive and is classified under various compliance categories.

The Modicon M340 processor module is a compact yet powerful Programmable Automation Controller (PAC) designed for the demands of the process industry and a wide array of automation applications. Its all-in-one CPU operates at a rapid 7 Kinst/ms, utilizing a multitasking system for quick reflex time.

The Male Crimp Termination Inserts are made from Polycarbonate (PC) material, featuring a pebble grey finish. These inserts are rated to handle up to 16 Amperes of current and are designed to accommodate 32 conductors. The conductor cross-section ranges from 0.14 mm² to 4 mm².

The SIMATIC_BUSADAPTER_PN_BA_2XRJ45 is a high-performance bus adapter designed for the SIMATIC ET 200SP system. Featuring two RJ45 sockets, this adapter ensures reliable and efficient PROFINET communication, making it an essential component for industrial automation applications.Key Features:Two RJ45 sockets for seamless connectivitySupports PROFINET IO protocolCompact design for easy integrationPerfect for:Industrial automation systemsManufacturing plantsProcess control environments

The Schneider Electric Altivar Machine ATV340 is a robust variable speed drive capable of handling 3-phase synchronous and asynchronous motors in open and closed loop control. This heavy-duty drive is designed to withstand harsh environments, including vibration, shock, non-conductive dust, and high temperatures up to 60 °C. With a rated power of 7.5kW / 10hp and a voltage range from 380V to 480V AC, the ATV340 is equipped with Modbus serial line communication protocols as standard. It weighs 3kg and has dimensions of 110mm wide, 270mm high, and 234mm deep. The Altivar Machine ATV340 is suitable for a variety of applications, including packaging, material handling, material working, and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories such as encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, and additional EMC filters are available for the Altivar Machine ATV340 drive, depending on the drive rating. The drive is designed to be mounted in a vertical position (+/- 10 °) on a panel with 4 fixing holes. The Altivar Machine ATV340 is fully integrated into Schneider Electric’s EcoStruxure Machine through DTM, allowing for configuration, control, and diagnosis directly in SoMachine and SoMove software using the same software brick (DTM).

The product is a 3VA21 motor circuit protector, designed for low voltage applications. It features a very high breaking capacity classified as Class C, with a rated current of 63A. The device is capable of achieving an Icu of 110kA at 415V and 2.5kA at 690V, ensuring effective motor protection.Equipped with the ETU350M electronic trip unit, this circuit breaker includes overload protection settings ranging from 25A to 63A, and short-circuit protection adjustable between 3 to 15 times the rated current. The dimensions of the unit are 4.1 inches in width, 7.1 inches in height, and 4.2 inches in depth.Connections are facilitated through a lug terminal and nut keeper, enhancing installation flexibility. The device is built for DIN rail mounting, providing additional options for integration into control systems. It has an IP40 protection degree, ensuring adequate safety for standard industrial environments.

The 3VA51 low voltage molded case circuit breaker is designed for effective protection in electrical systems. It incorporates a thermal-magnetic trip unit, ensuring both overload and short-circuit protection. With a medium breaking capacity classified as M, it can handle up to 35kA at 480V and 18kAIC at 600Y/347.Measuring 3 x 5.5 x 3.7 inches, this circuit breaker is constructed without lugs, facilitating straightforward installation. The TM230 trip unit allows for fixed overload protection at 100A, with adjustable short-circuit protection set between 5 to 10 times the rated current. This device is suitable for various applications, ensuring robust performance and reliability in line protection.