Części zamienne i komponenty ABB online – Rozwiązania automatyki od zaufanych dostawców

The E2.2S 1600 is an air circuit breaker designed for effective electrical protection in various applications. This model features three poles and is equipped with rear horizontal terminals, facilitating straightforward installation and connectivity. The solid-state release mechanism enhances operational reliability and performance.With a rated current of 1600 A and a maximum operational voltage of 690 V AC, the circuit breaker is built to handle significant electrical loads. It achieves a short-circuit breaking capacity of 85 kA across multiple voltage levels, ensuring robust protection against short circuits. The electrical durability is rated for up to 12,000 cycles at 440 V and 10,000 cycles at 500 to 690 V, accommodating frequent operational demands.This circuit breaker also adheres to international standards such as IEC, highlighting its compliance with industry requirements. The product is classified under the designation code E2.2, further defining its specifications within the SACE Emax 2 product line. Its construction allows for a mechanical durability of 25,000 cycles, making it suitable for high-demand environments.Environmental considerations have also been addressed, with a recyclability rate of 79.3% and compliance with relevant directives such as RoHS. The product meets the criteria for zero waste to landfill, contributing to sustainable practices in its lifecycle.

The E4.2N 3200 is a fixed three-pole air circuit breaker equipped with a solid-state release system, specifically the Ekip Hi-Touch LSIG. This device operates at a rated current of 3200 A and a maximum rated operational voltage of 690 V AC, making it suitable for various industrial applications. It includes four auxiliary contacts and is designed for high electrical durability, rated for 7000 cycles at voltage levels up to 440 V.With a mechanical durability rated for 20000 cycles, this circuit breaker ensures long-term reliability under frequent operation. Notably, it provides a rated short-circuit breaking capacity of 66 kA across multiple voltage settings, which enhances its performance in critical fault conditions. The product meets IEC standards and features a rated impulse withstand voltage of 12 kV according to IEC 60947-2.The terminal connection type is rear flat horizontal, secured with bolts and a tightening torque of 70 N·m. The product dimensions are 384 mm in width, 371 mm in height, and 270 mm in depth, with a total weight of 56 kg. The E4.2N has been designed with an emphasis on recyclability, achieving a rate of 77.4% in accordance with EN45555 standards.For additional information, the Designation Code associated with this product is E4.2. This model is compliant with RoHS regulations and is designed to support zero waste to landfill initiatives.

The T16-1.0 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the mini contactors or block contactors. Single mounting kits are available as accessory.

The E2.2H 2500 air circuit breaker is configured with four poles and is equipped with a solid-state release system, specifically the Ekip Touch LSIG. It operates at a rated current of 2500 A and is suitable for voltages up to 690 V AC. This model supports horizontal rear terminal connections, utilizing bolts for secure installation with a tightening torque of 70 N·m.It has an electrical durability rating of 8000 cycles at 440 V and 7000 cycles at 500 to 690 V, with a mechanical durability of 20,000 cycles. The product’s rated short-circuit breaking capacity is 100 kA across various voltage ratings, ensuring robust protection in electrical installations.Dimensions include a width of 366 mm, height of 371 mm, and depth of 270 mm, with a net weight of 53 kg. The unit is compliant with IEC standards and features an environmental product declaration.

The E2.2S 800 Ekip Dip LI is a fixed four-pole air circuit breaker tailored for alternating current applications. With a rated current of 800 A and a rated operational voltage of 690 V, it provides essential protection for transformer, generator, and installation systems. The device is equipped with a solid-state release mechanism and features 4 auxiliary contacts for enhanced functionality.This circuit breaker is designed to meet stringent standards, with a rated short-circuit breaking capacity of 85 kA for various voltage levels, ensuring reliable performance under fault conditions. The mechanical durability is rated at 25,000 cycles, while the electrical durability is specified for operation up to 15,000 cycles at voltage levels of 440 V and 690 V. It supports rear flat horizontal terminal connections with a tightening torque of 70 N·m.In terms of sustainability, the product adheres to design principles favoring recyclability, achieving a rate of 79.3% in compliance with EN45555. The product carries significant certifications including compliance with IEC standards and environmental declarations, contributing to its suitability for modern electrical installations.

The 1250 A Air Circuit Breaker E1.2B features a four-pole arrangement and utilizes the Ekip Hi-Touch LSIG release mechanism. It is specifically engineered for AC applications, supporting rated operational voltages up to 690 V.This model ensures high electrical durability, rated at 8000 cycles at Ue = and 6500 cycles at Ue = 500 ... 690 V, with a maximum mechanical durability of 20000 cycles. The product's rated current is 1250 A, and it provides precise short-circuit protection with a rated service short-circuit breaking capacity (Ics) of 42 kA across various voltages.Additionally, it is equipped with four auxiliary contacts and can be used in both open and closed positions. The design adheres to IEC standards, making it suitable for IT networks at 690 V. The unit's dimensions are 348 mm in width, 363.5 mm in height, and 271 mm in depth, weighing 20 kg. The product also has a notable power loss of 244 W.

The E4.2N 3200 model includes an advanced Ekip Touch LSIG release, tailored for air circuit breaker applications. It operates effectively with a rated service short-circuit breaking capacity of 66 kA across various voltage ratings, including 220 V to 690 V AC.This device supports a rated operational voltage of 690 V AC and ensures electrical durability up to 7000 cycles at specific voltage thresholds. With a mechanical endurance rating of 20,000 cycles, it accommodates operational demands efficiently. The product is designed with a neutral pole current capacity of 100% and includes four auxiliary contacts for enhanced functionality.The dimensions of the unit are 551 mm in width, 425 mm in height, and 383 mm in depth, with a net weight of 74 kg. It conforms to IEC standards, ensuring reliability in various applications.In terms of environmental compliance, the product adheres to RoHS directives and supports circular economy principles with a recyclability rate of 77.4%. Additionally, it offers a lifetime extension service and has certification for zero waste to landfill.

The E2.2N 1250 is a fixed four-pole air circuit breaker equipped with rear horizontal terminals and a solid-state release. With a rated current of 1250 A, this model supports a rated operational voltage of 690 V AC and is capable of handling short-circuit breaking capacities of up to 66 kA across various voltage levels.This device features a mechanical durability of 25,000 cycles and an electrical durability at 15,000 cycles for voltages up to 690 V. The breaker is designed with a power loss of 83 W and complies with IEC standards. The release mechanism is classified as Ekip Dip LSIG, ensuring reliable operation in critical applications.Dimensions include a net width of 366 mm, height of 371 mm, and depth of 270 mm, with a net weight of 53 kg. It also includes 4 auxiliary contacts and can be installed with a recommended screw driver of M12. For environmental compliance, the E2.2N 1250 meets the recyclability standards as per EN45555, ensuring a high recyclability rate of 79.3%.

The E4.2N 4000 is a four-pole air circuit breaker designed for robust protection in electrical installations. It utilizes a solid-state release mechanism, specifically the Ekip Hi-Touch LSI, to enhance operational reliability. This model supports a rated current of 4000 A and is capable of handling operational voltages up to 690 V AC. With a mechanical durability rated at 15,000 cycles and an electrical durability of up to 5,000 cycles at 440 V, this circuit breaker is optimized for demanding environments.In terms of short-circuit performance, it achieves a breaking capacity of 66 kA across multiple voltage levels, ensuring effective protection against electrical faults. The device also adheres to IEC standards, making it suitable for various industrial applications.Dimensions include a width of 551 mm, height of 425 mm, and depth of 383 mm, with a net weight of 74 kg. The product is designed with a high recyclability rate, aligning with modern environmental standards.

The E6.2V 6300 Ekip Dip LSIG is a three-pole air circuit breaker specifically engineered for alternating current (AC) applications. It is equipped with a solid-state release mechanism, enhancing its operational reliability and performance. This model supports a rated current of 6300 A and is capable of handling operational voltages up to 690 V AC.With an electrical durability rating of 2000 cycles at voltages of up to 440 V and 500 to 690 V, the breaker can perform 10 cycles per hour. Its mechanical durability extends to 12000 cycles with a performance capacity of 60 cycles per hour. The device maintains a power loss of 1550 W, ensuring efficient operation.Notably, the short-circuit performance level of this circuit breaker is rated at V, with a rated service short-circuit breaking capacity (Ics) of 150 kA for voltages up to 415 V AC. Furthermore, it complies with IEC standards, making it suitable for various industrial applications. The dimensions of the product measure 803 mm in width, 425 mm in height, and 383 mm in depth, with a total weight of 120 kg. This product also adheres to environmental standards, promoting recyclability and extending product lifetime through design principles aligned with EN45555.

The softstarter PSE142-600-70 has a rated maximum operational current of 142 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

The S202M-D32 miniature circuit breaker is engineered to provide reliable protection against overloads and short circuits, featuring a delayed thermal tripping mechanism and an electromechanical tripping mechanism. It is compliant with international standards IEC/EN 60898-1 and IEC/EN 60947-2, making it suitable for a variety of applications including residential and commercial installations.With a rated operational voltage of up to 440 V AC and a rated short-circuit capacity of 10 kA, this device ensures effective circuit protection. The S202M-D32 supports multiple mounting configurations on standard DIN rails and has a compact design, with dimensions of 35 mm in width and a height of 88 mm, allowing for space-efficient installations.Additionally, the device features a high degree of environmental resilience, rated for operation between -25 °C to +55 °C, and a degree of protection rated at IP20. The inclusion of a bottom-fitting auxiliary contact option allows for further space savings. The S202M-D32 also adheres to eco-friendly practices, being designed for recyclability and offering take-back services for recycling.

The CR-M230AC4LG is a compact pluggable interface relay designed for a control supply voltage of 230 V AC. It includes 4 c/o (SPDT) output contacts with gold plating, capable of handling a load of 250 V at 6 A. An integrated orange test button allows for manual actuation and locking of the output contacts, complemented by an LED indicator for operational status.This relay adheres to multiple standards, including IEC/EN 61810-1 and UL 508, ensuring reliability in various applications. It is designed to operate within an ambient temperature range of -40 to +55 °C and can withstand altitudes up to 2000 m without derating. The relay's IP40 degree of protection makes it suitable for a wide range of environments.Accessories such as standard sockets and pluggable function modules are available for enhanced versatility. The product's compact dimensions are 21.2 mm in width, 35.6 mm in height, and 27.5 mm in depth, with a net weight of 0.033 kg. The product complies with RoHS regulations according to EU Directive 2011/65/EU, and its packaging contains 10 pieces per box.

The E1.2B 800 Ekip Touch LSI is designed as a four-pole air circuit breaker suitable for applications requiring reliable current interruption. It features a rated current of 800 A and supports operational voltages up to 690 V AC. The device operates with solid-state release technology, specifically the Ekip Touch LSI, which ensures precise performance.With a mechanical durability of 20,000 cycles and electrical durability rated for 8,000 cycles at various voltage levels, this circuit breaker demonstrates high reliability in demanding environments. The rated short-circuit breaking capacity is substantial, exhibiting a performance level of 100% of Icu, with capabilities of 42 kA at multiple voltages including 220 V AC to 690 V AC.Additional features include a neutral pole current of 100% and a power loss of 50 W. Its compact dimensions of 280 mm width, 296 mm height, and 183 mm depth contribute to effective space management in installations. The terminal connection is designed for front access, employing bolt-type connections with a tightening torque of 45 N·m.This circuit breaker adheres to IEC standards and is classified under ETIM 9 as a power circuit breaker for transformer, generator, and installation protection, ensuring compliance with relevant industry norms.

The AF38-22-00-14 contactor operates effectively within a voltage range of 250-500 V at 50/60 Hz and DC, making it suitable for environments with significant control voltage variations. This capability, facilitated by its AF technology, allows for reduced energy consumption in panels and reliable functioning in unstable electrical networks. The contactor is compliant with IEC/EN 60947-1 and IEC/EN 60947-4-1 standards, ensuring its robustness for various applications.With a maximum operational voltage of 690 V and a rated operational current of 55 A for AC-1, it can handle inductive loads with its AC-3 rating of up to 11 kW at 400 V. The design incorporates built-in surge protection, enhancing its reliability and compactness. The device features a block-type structure and supports easy extension with additional auxiliary contact blocks.Installation is streamlined with DIN rail mounting options and screw terminals, ensuring compatibility with various wiring configurations. The contactor's ambient temperature range allows for operation in conditions from -40 °C to 70 °C, with a pollution degree of 3, which confirms its suitability for industrial environments.

The E4.2H 4000 is a three-pole air circuit breaker specifically engineered for AC systems, capable of handling a rated current of 4000 A. This device features a solid-state release mechanism, Ekip Hi-Touch LSIG, which enhances operational reliability in critical applications. With an electrical durability rating of up to 440 V for 5000 cycles and a mechanical durability of 15000 cycles, the circuit breaker is designed for extensive usage.It operates effectively under a rated voltage of 690 V and can withstand short-circuit breaking capacities of up to 100 kA at various voltages. The short-time withstand current is rated at 85 kA for 1 second, ensuring robust performance during fault conditions. Furthermore, the product adheres to IEC standards, ensuring compliance and safety.Dimensions include a net width of 425 mm, height of 425 mm, and depth of 383 mm, while weighing 60 kg. This product also incorporates advanced environmental features, achieving a recyclability rate of 77.4% as per EN45555 standards, promoting sustainable practices.

The CP-E 24/2.5 is a robust switch mode power supply designed for industrial applications. It boasts an extensive input voltage range of 85-264 V AC and 90-375 V DC, with a rated input voltage of 100-240 V AC. The unit delivers a maximum output power of 60 W at an output current of 2.5 A, with an adjustable output voltage ranging from 24 to 28 V DC.This power supply provides a U/I output characteristic and supports parallel operation for redundancy. It also features a signalling output (transistor) to indicate the status of the output voltage. An optional redundancy unit is available as an accessory, enhancing its reliability in critical applications.

The E2.2N 1600 is an air circuit breaker engineered for AC use, featuring a four-pole configuration and a solid-state release mechanism known as Ekip Touch LI. This product is rated for a maximum operational voltage of 690 V AC and can handle a rated current of 1600 A.With a mechanical durability of up to 25,000 cycles and an electrical durability of 12,000 cycles at up to 440 V, the E2.2N 1600 is optimized for demanding industrial environments. It also supports a short-circuit breaking capacity of 66 kA across a range of voltages, ensuring reliable protection for transformers, generators, and installations.This device is compliant with IEC standards and incorporates features such as four auxiliary contacts, enhancing its functionality in power distribution applications. The product is designed for easy integration into existing systems, making it suitable for IT networks.

The E2.2S 250 Air Circuit Breaker features a three-pole configuration with a solid-state release system known as Ekip Hi-Touch LSI. This breaker is capable of handling a rated current of 250 A and operates effectively at a rated voltage of 690 V AC. Its electrical durability is rated for a maximum of 15,000 cycles at voltages up to 440 V and 500 to 690 V, ensuring reliability in high-demand environments.With a mechanical durability of 25,000 cycles at 60 cycles per hour, this product also maintains a power loss of 100 W. The rated short-circuit breaking capacity reaches up to 85 kA at various operational voltages, making it suitable for critical applications.In terms of dimensions, the product measures 317 mm in width, 425 mm in height, and has a depth of 383 mm, weighing 48 kg. Compliance with IEC standards ensures its reliability and safety in industrial settings, while its design supports sustainability with a recyclability rate of 79.3% according to EN45555 standards.This product falls under the classification of power circuit-breakers used for transformer, generator, and installation protection, aligning with ETIM 9 standards.

The E6.2V/f 6300 Ekip Touch LI is an air circuit breaker specifically engineered for usage in AC environments. This model operates with a rated current of 6300 A and a rated operational voltage of 690 V AC. The electrical durability is rated for 440 V with a cycle life of 2000, and it supports 10 cycles per hour. It features a neutral pole current rating of 100% and is equipped with four auxiliary contacts, confirming its capabilities in both open and closed positions.In terms of short-circuit performance, the device maintains a breaking capacity of 150 kA across various voltage levels, such as 400 V, 415 V, and 440 V AC. It adheres to the IEC standards and is classified under the E6.2 subtype. The mechanical durability is rated for a significant lifespan of 12000 cycles, with a maximum of 60 cycles per hour. The unit also features Ekip Touch LI release technology, ensuring precise operational control.For environmental compliance, this product is designed with a recyclability rate of 76.7% according to EN45555 standards, contributing to sustainable operation. The dimensions of the product include a width of 1069 mm, height of 425 mm, and depth of 383 mm, with a net weight of 148 kg. This model is suitable for IT networks at 690 V, showcasing its versatility across different applications.