Części zamienne i komponenty ABB online – Rozwiązania automatyki od zaufanych dostawców

The CM-PFS.S three-phase monitoring relay is designed for accurate measurement of phase sequences in electrical systems. With a width of 22.5mm, this device can measure the voltage range between L1-L2-L3 from 200 to 500VAC at a frequency of 50/60Hz. Powered by the measuring range, the relay operates on the closed circuit principle with two connection points (c/o). It features screw connection technology with double-chamber cage connection terminals for reliable and secure electrical connections.

The TF140DU-135 thermal overload relay is a cost-effective solution designed to protect the primary circuit. It offers robust and prompt protection for motors in case of overload or phase failure. The device boasts a trip class of 10A, ensuring efficient operation. Additional features include temperature compensation, trip contact (NC), signal contact (NO), selectable automatic or manual reset, trip-free mechanism, STOP- and Test function, and a trip indication. These overload relays are directly connected to the block contactors for seamless integration.

The UVR +TIME-LAG DEVICE 110-220VAC S6-S7 by ABB is designed to provide reliable and efficient performance in various applications. This device ensures precise time-lag functionality, making it ideal for scenarios where delayed action is crucial.Key Features:High reliabilityEfficient performanceSuitable for S6-S7 seriesApplications:This device is perfect for use in industrial automation, control systems, and other applications requiring time-lag functionality.

The E2.2H 800 Air Circuit Breaker is designed to provide reliable protection with its four-pole configuration and rear horizontal terminal connections. This model incorporates an Ekip Hi-Touch LSI release, ensuring precise control and operational efficiency. The circuit breaker operates under alternating current (AC) conditions with a rated current of 800 A and is suitable for a rated voltage of 690 V AC.With a rated impulse withstand voltage of 12 kV according to IEC 60947-2, this device demonstrates robust performance in various electrical environments. It is engineered to handle a rated service short-circuit breaking capacity of up to 100 kA for multiple voltage levels, ensuring effective protection against overloads.Mechanical durability is rated at 25,000 cycles, while electrical durability reaches 15,000 cycles at specified voltages, offering longevity in demanding applications. The design also adheres to environmental standards, achieving a recyclability rate of 79.3% in compliance with EN45555.For installation, the recommended tightening torque is 70 N·m, and the product dimensions are 366 mm in width, 371 mm in height, and 270 mm in depth, with a net weight of 53 kg. This circuit breaker is classified under ETIM 9 as a power circuit-breaker, making it suitable for transformer, generator, and installation protection.

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult your ABB representative.

Safety relay and expansion relay with relay outputs 4NO, +24 VDC supply voltage and screw terminals. For monitoring of safety devices, such as emergency stops, directly in the voltage supply circuit of the relay. Also suitable as expansion relay for a safety relay/safety PLC, in order to increase the number of safe outputs.

This slide lock is specifically tailored for the MKey8 and MKey9 models, providing a right-hand locking mechanism. Constructed from durable metal, it is engineered to endure shearing forces of up to 10,000 N (equivalent to 1,000 kg), making it suitable for large hinged doors. Its dimensions include a net height of 310 mm, a width of 196 mm, and a depth of 73 mm, with a total net weight of 1.944 kg. The product complies with various standards, including the American Recovery and Reinvestment Act and the Buy American Act, which require contacting the manufacturer for compliance details. Additionally, it meets RoHS requirements under EU Directive 2011/65/EU and its amendment from July 22, 2019. Please note that the MKey is not included with this accessory.

The CP-D 24/0.42 power supply operates efficiently within a wide input voltage range of 90-264 V AC and 120-375 V DC, with a rated input voltage of 100-240 V AC. It is characterized by a rated output power of 10 W, providing 0.42 A of output current at a consistent output voltage of 24 V DC. The device features a hiccup-mode output characteristic, ensuring reliable operation.With a compact design, the power supply measures 18 mm in width, 91 mm in height, and 57.5 mm in depth, weighing only 0.066 kg. It is suitable for mounting on DIN rails TH35-15 and TH35-7.5 in accordance with IEC 60715 standards. The device is compliant with various international standards including UL 508 and IEC 60950-1, ensuring its reliability and safety in industrial applications.Environmental conditions for operation range from -40 °C to +70 °C, with a permissible maximum operating altitude of up to 4850 m. The device meets the requirements of RoHS and WEEE regulations, affirming its compliance with environmental standards.

Advanced compact DIN-rail meter with an easy to read back lighted display. The meter is intended for use in the commercial or residential buildings etc. The meter can be used in 3 or 4 wire systems. The meter has several instrumentation values, 25 possible alarms and event logs. Three phase transformer connectedfor active energy. One output for pulses or alarm etc. M-Bus communication.Accuracy class 1.0 (or B for MID meters). The meters is IEC approved + MID approved and verified.

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

The E1.2N 250 Ekip Hi-Touch LSIG represents a four-pole air circuit breaker suitable for AC usage, featuring a solid-state release mechanism. This model is equipped with four auxiliary contacts and operates efficiently in both open and closed positions. It adheres to the Designation Code standards, ensuring reliability and performance.With a rated current of 250 A and an operational voltage of up to 690 V AC, this device is designed for significant electrical durability, capable of withstanding up to 8000 cycles. The electrical durability ratings indicate the ability to function effectively at voltages up to 440 V, with a short-circuit breaking capacity of 66 kA at various voltage levels. The rated impulse withstand voltage complies with IEC 60947-2 standards, rated at 12 kV.Dimensions include a net width of 348 mm, height of 363.5 mm, and depth of 271 mm, with a net weight of 20 kg. The device features a mechanical durability of up to 20,000 cycles and supports connection capacities of 120 mm². This circuit breaker is also compliant with RoHS directives and includes a significant recyclability rate of 76.4%, aligning with circular design principles.

The E1.2C 1250 is a three-pole air circuit breaker tailored for SACE EMAX2 applications, equipped with a solid-state release mechanism known as Ekip Hi-Touch LSIG. This device operates effectively at a rated operational voltage of 690 V AC and supports a rated current of 1250 A. It features an electrical durability that accommodates up to 8,000 cycles at a voltage of 440 V and 6,500 cycles at voltages ranging from 500 to 690 V, allowing for 30 cycles per hour. Mechanically, it is rated for 20,000 cycles and can handle 60 cycles per hour. The breaker is also designed to manage a power loss of 244 W. The rated service short-circuit breaking capacity is notable, offering 50 kA at various voltages up to 440 V AC, and 42 kA at higher voltages. Additionally, it meets IEC standards with a rated impulse withstand voltage of 12 kV and a rated insulation voltage of 1,000 V AC. Dimensions for the product are as follows: a width of 278 mm, height of 363.5 mm, and depth of 271 mm, with a net weight of 18 kg. The robust design adheres to environmental regulations, featuring a recyclability rate of 77.6% according to EN45555 standards. This air circuit breaker is suitable for IT networks and is classified under the ETIM 9 standard as a power circuit-breaker for transformer, generator, or installation protection, ensuring its reliability in critical applications.

This air circuit breaker, designated as E4.2V 2000, features a fixed four-pole configuration with rear horizontal terminals and incorporates a solid-state release mechanism, specifically the Ekip Touch LSIG. The device is equipped with four auxiliary contacts and offers both open and closed positions for the circuit breaker. With a rated operational voltage of 690 V AC and a current rating of 2000 A, this model is designed for high performance. It supports a rated short-circuit breaking capacity (Icu) of up to 150 kA for various voltage levels, ensuring reliable protection in demanding applications. The electrical durability is rated for 10,000 cycles at voltages below 440 V and 500 to 690 V, with a mechanical durability of 20,000 cycles. The breaker operates effectively within a range of environmental conditions, adhering to IEC standards. It features a compact design with a net width of 510 mm, height of 371 mm, and depth of 270 mm, weighing 70 kg. Its terminal connection type is a rear flat horizontal configuration, allowing for straightforward installation. Notably, the E4.2V 2000 is compliant with environmental standards, including RoHS and REACH directives, and supports a high recyclability rate of 79.3% as per EN45555 standards. For further information on its lifecycle and environmental impact, please refer to the Environmental Product Declaration (EPD) 9AKK108468A1904.

The E2.2H 2000 Ekip Dip LI 3p F HR air circuit breaker is engineered for robust electrical performance in various industrial applications. This model operates with a rated current of 2000 A and is suitable for voltages up to 690 V AC. It is equipped with a solid-state release system for enhanced reliability.Notable specifications include a rated operational voltage of 690 V and a short-circuit breaking capacity of 100 kA across multiple voltage ratings, ensuring effective protection against potential electrical faults. The device is designed with a mechanical durability of 25,000 cycles and an electrical durability of 10,000 cycles at 440 V, which supports high-frequency operational demands.With a compact design featuring dimensions of 276 mm (W) x 371 mm (H) x 270 mm (D) and a weight of 41 kg, it offers efficient space utilization in control panels. The terminal connection type is rear flat horizontal, allowing for straightforward installation. This circuit breaker complies with IEC standards and is classified under the Designation Code for effective environmental management.

The E2.2H 1250 air circuit breaker is designed for fixed mounting and features a rear horizontal terminal connection. With a rated current of 1250 A and a rated operational voltage of 690 V AC, it provides reliable protection for electrical circuits. This model incorporates a solid-state release mechanism, specifically the Ekip Dip LSIG, enhancing its operational capabilities.It supports a mechanical durability of 25,000 cycles and an electrical durability rated for 15,000 cycles at voltages up to 690 V. The device is capable of handling short-circuit breaking capacities of up to 100 kA at various voltages, ensuring robust protection against fault conditions. The rated impulse withstand voltage is 12 kV according to IEC 60947-2 standards, and its rated insulation voltage reaches 1000 V AC.Measuring 366 mm in width, 371 mm in height, and 270 mm in depth, the breaker has a net weight of 53 kg. It is designed for high performance with a power loss of 83 W and a tightening torque specification of 70 N·m for terminal connections. The product is classified under the designation code E2.2, and complies with multiple standards including REACH and RoHS.

The AF09Z-30-01-22 contactor features a built-in auxiliary contact and screw terminals, providing versatile control for motors and power circuits. It operates effectively within a control voltage range of 48-130 V at 50/60 Hz and DC, accommodating significant voltage fluctuations which can lead to reduced energy consumption in control panels. This model supports motors rated up to 4 kW at 400 V AC (AC-3) and 5 hp at 480 V UL while managing power circuits up to 25 A (AC-1).Complying with multiple standards including IEC/EN 60947-1 and UL 60947-4-1, this contactor incorporates surge protection, optimizing its performance in unstable networks. The block-type design allows for easy expansion with additional auxiliary contact blocks and a variety of accessories. The dimensions of the product are 45 mm in width, 77 mm in depth, and 86 mm in height, with a weight of 0.31 kg.As part of the AF series, this contactor is characterized by high reliability and functionality in demanding environments, with an operational temperature range from -25 °C to +60 °C when fitted with a thermal overload relay, and from -40 °C to +70 °C without one. The device is also rated for a maximum breaking capacity of 250 A at 440 V and supports a maximum electrical switching frequency of 1200 cycles per hour for AC-3 applications.

The E2.2H 2000 Ekip Touch LI is a three-pole air circuit breaker designed for AC applications, featuring a solid-state release mechanism. This device supports a rated current of 2000 A and a maximum operational voltage of 690 V AC. The circuit breaker is equipped with a rear flat horizontal terminal connection, utilizing bolts for secure attachment and requiring a tightening torque of 70 N·m.With a power loss of 212 W, it offers electrical durability of up to 10,000 cycles at 440 V and 8,000 cycles at voltages ranging from 500 to 690 V. The mechanical durability is rated at 25,000 cycles. The product's rated short-circuit breaking capacities are robust, with Icu values reaching 100 kA across various operational voltages, ensuring reliable performance in high-demand scenarios.This unit adheres to IEC standards and is classified under ETIM 9 as a power circuit-breaker suitable for transformer and generator protection. The environmental impact is addressed through a recyclability rate of 79.3% according to EN45555, contributing to sustainable operation. The E2.2H 2000 Ekip Touch LI is also compliant with RoHS directives, confirming its adherence to environmental safety regulations.

The E1.2N 800 Air Circuit Breaker is designed for use in AC applications, featuring a solid-state release system under the Ekip Hi-Touch LSI specification. This four-pole device supports a rated current of 800 A and operates efficiently at a rated voltage of 690 V AC.With an electrical durability rating of up to 440 V for 8000 cycles and 500 to 690 V for the same number of cycles, it ensures reliable performance. The mechanical durability stands at 20,000 cycles, maintaining operational integrity at 60 cycles per hour.Notable specifications include a rated short-circuit breaking capacity of 66 kA at 400 V AC and a power loss of 100 W. The product's dimensions are 348 mm in width, 363.5 mm in height, and 271 mm in depth, with a net weight of 20 kg. It complies with IEC standards and is suitable for IT networks at 690 V.The environmental considerations of this device include a recyclability rate of 77.6% and adherence to the EU RoHS directive. The designation code for this product is E1.2, confirming its specific model attributes.

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

The E6.2H 6300 Ekip Dip LI 3p WMP is designed for use in SACE EMAX2 air circuit breakers, featuring a solid-state release mechanism. This variant supports a rated current of 6300 A and operates at a rated voltage of 690 V AC. The product ensures high reliability with a mechanical durability rated at 12,000 cycles and can handle 60 cycles per hour, making it suitable for demanding applications.Electrical durability is rated for voltages up to 690 V, supporting 2,000 cycles at various operational voltages, including 440 V and 500 V. With a rated short-circuit breaking capacity of 100 kA across multiple voltage levels, the device is engineered for robust performance in critical installations.Dimensionally, the product measures 803 mm in width, 425 mm in height, and 383 mm in depth, with a net weight of 120 kg. It is equipped with four auxiliary contacts, allowing for comprehensive monitoring of the circuit status. The release type is designated as EL with Ekip Dip LI functionality, ensuring advanced protection and control.Compliance with IEC standards is maintained, and the product adheres to environmental guidelines, contributing to a recyclability rate of approximately 76.7%. This makes the E6.2H 6300 Ekip Dip LI 3p WMP not only a high-performance component but also a responsible choice for sustainable operations.