Bosch Rexroth Części zamienne do automatyki przemysłowej

TASS EXCHANGE PART TR1 EXTERNAL HEXAGON SW8 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR1 EXTERNAL HEXAGON SW7 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 7.5 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR1 INTERNAL TORX T25 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 15 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR1 INTERNAL TORX T20 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 7.5 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR1 EXTERNAL HEXAGON SW4 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 15 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR2 EXTERNAL HEXAGON SW10 The TASS exchange part is the interface between the TASS element and the tightening spindle drive.

TASS EXCHANGE PART TR3 INTERNAL TORX T45 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 62.5 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR3 EXTERNAL HEXAGON SW16 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 125 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

TASS EXCHANGE PART TR1 EXTERNAL TORX E6 The TASS exchange part is the interface between the TASS element and the tightening spindle drive. - Exchange part for a maximum M3 torque of 15 Nm - Many different drives available for exchange parts - Please contact us if you cannot find the drive for your application - The TASS exchange part must be selected to match the size of the TASS element

Carrying plate WT 2, ST 4.8 160/320 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 240/400 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 240/320 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 240/240 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Carrying plate WT 2, ST 4.8 160/240 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

BLIND PANEL BP352 LT+SE - Accessories for SB356 systembox and BT356 card rack - Empty slots are closed off with dummy panels. Two versions are available: BP351 closes a KE or an LT slot, BP352 closes an SE and an LT slot together.

TASS TR1 1-2 NM With TASS (Torque and Angle Slip Standard), Bosch Rexroth enables you to test tightening spindles on the fly in the production line. This is only possible with tightening spindles from Bosch Rexroth that have a measurement transducer installed and a controller with IL functionality. A test run takes only a few seconds and checks two torque points, the rotation angle and the linearity. Use of TASS requires an exchange part to act as the interface to the spindle, as well as a software license. TASS Fix is also available for quickly and easily installing TASS in the customer application. - Validate tightening spindles when installed - Check three parameters in one pass (2x torque, rotation angle and linearity) - Can be used in short cycles, e.g. daily – no flying blind in production - Immediate feedback – no time delay – immediate intervention possible - Machine capability cycles can be extended under certain circumstances - No additional measuring electronics necessary – evaluation takes place on the nutrunner controller with IL - A TASS can be passed through the production line on a workpiece pallet – this allows one TASS to be used for multiple tightening spindles - All the elements required for a fitting have an impact on the validation – e.g. the tightening spindle, transducers and output drives are taken into account - Variety of exchange parts to adapt to customer applications - If your required exchange part is not listed, please contact us

TASS TR1 3-6 NM With TASS (Torque and Angle Slip Standard), Bosch Rexroth enables you to test tightening spindles on the fly in the production line. This is only possible with tightening spindles from Bosch Rexroth that have a measurement transducer installed and a controller with IL functionality. A test run takes only a few seconds and checks two torque points, the rotation angle and the linearity. Use of TASS requires an exchange part to act as the interface to the spindle, as well as a software license. TASS Fix is also available for quickly and easily installing TASS in the customer application. - Validate tightening spindles when installed - Check three parameters in one pass (2x torque, rotation angle and linearity) - Can be used in short cycles, e.g. daily – no flying blind in production - Immediate feedback – no time delay – immediate intervention possible - Machine capability cycles can be extended under certain circumstances - No additional measuring electronics necessary – evaluation takes place on the nutrunner controller with IL - A TASS can be passed through the production line on a workpiece pallet – this allows one TASS to be used for multiple tightening spindles - All the elements required for a fitting have an impact on the validation – e.g. the tightening spindle, transducers and output drives are taken into account - Variety of exchange parts to adapt to customer applications - If your required exchange part is not listed, please contact us

GAUGE TASS TR14-8 NM With TASS (Torque and Angle Slip Standard), Bosch Rexroth enables you to test tightening spindles on the fly in the production line. This is only possible with tightening spindles from Bosch Rexroth that have a measurement transducer installed and a controller with IL functionality. A test run takes only a few seconds and checks two torque points, the rotation angle and the linearity. Use of TASS requires an exchange part to act as the interface to the spindle, as well as a software license. TASS Fix is also available for quickly and easily installing TASS in the customer application. - Validate tightening spindles when installed - Check three parameters in one pass (2x torque, rotation angle and linearity) - Can be used in short cycles, e.g. daily – no flying blind in production - Immediate feedback – no time delay – immediate intervention possible - Machine capability cycles can be extended under certain circumstances - No additional measuring electronics necessary – evaluation takes place on the nutrunner controller with IL - A TASS can be passed through the production line on a workpiece pallet – this allows one TASS to be used for multiple tightening spindles - All the elements required for a fitting have an impact on the validation – e.g. the tightening spindle, transducers and output drives are taken into account - Variety of exchange parts to adapt to customer applications - If your required exchange part is not listed, please contact us

TASS TR1 2-4 NM With TASS (Torque and Angle Slip Standard), Bosch Rexroth enables you to test tightening spindles on the fly in the production line. This is only possible with tightening spindles from Bosch Rexroth that have a measurement transducer installed and a controller with IL functionality. A test run takes only a few seconds and checks two torque points, the rotation angle and the linearity. Use of TASS requires an exchange part to act as the interface to the spindle, as well as a software license. TASS Fix is also available for quickly and easily installing TASS in the customer application. - Validate tightening spindles when installed - Check three parameters in one pass (2x torque, rotation angle and linearity) - Can be used in short cycles, e.g. daily – no flying blind in production - Immediate feedback – no time delay – immediate intervention possible - Machine capability cycles can be extended under certain circumstances - No additional measuring electronics necessary – evaluation takes place on the nutrunner controller with IL - A TASS can be passed through the production line on a workpiece pallet – this allows one TASS to be used for multiple tightening spindles - All the elements required for a fitting have an impact on the validation – e.g. the tightening spindle, transducers and output drives are taken into account - Variety of exchange parts to adapt to customer applications - If your required exchange part is not listed, please contact us

TASS TR3 40-80 NM With TASS (Torque and Angle Slip Standard), Bosch Rexroth enables you to test tightening spindles on the fly in the production line. This is only possible with tightening spindles from Bosch Rexroth that have a measurement transducer installed and a controller with IL functionality. A test run takes only a few seconds and checks two torque points, the rotation angle and the linearity. Use of TASS requires an exchange part to act as the interface to the spindle, as well as a software license. TASS Fix is also available for quickly and easily installing TASS in the customer application. - Validate tightening spindles when installed - Check three parameters in one pass (2x torque, rotation angle and linearity) - Can be used in short cycles, e.g. daily – no flying blind in production - Immediate feedback – no time delay – immediate intervention possible - Machine capability cycles can be extended under certain circumstances - No additional measuring electronics necessary – evaluation takes place on the nutrunner controller with IL - A TASS can be passed through the production line on a workpiece pallet – this allows one TASS to be used for multiple tightening spindles - All the elements required for a fitting have an impact on the validation – e.g. the tightening spindle, transducers and output drives are taken into account - Variety of exchange parts to adapt to customer applications - If your required exchange part is not listed, please contact us