Bosch Rexroth Części zamienne do automatyki przemysłowej

Mains cable GB-GST - Ready-to-use mains cable: Available in various country versions; for simple, reliable plug-and-play installation with no specialist knowledge required - For connecting system lamps, socket strips or power strips - Open-ended mains cable: for self-assembly; accessories: GST plug

Cable duct 45x45, N10, black - Cable duct for routing electrical lines - Captive cover - Really easy to access - Large usable volume - Simple, fast assembly – just clips into the 10 mm slot - Cover cap for sealing the cable duct with pre-punched holes for running cables through - VDE certified - An ESD-conductive connection made of plastic between the profile and the cable duct must be ensured by a suitable design solution, e.g. screw

Strut profile 20x60

Strut profile 30x60° 20xL=5600mm

Clamping profile 1S, N8 L3000 - For simple fastening of panes, surface elements or grilles on strut profiles - For subsequent installation in closed frame constructions - For surface elements of varying thicknesses - Profile finishing: through-hole for mounting screw

Protective pane profile, clean room, N8 clip-on strip - For the play-free mounting of surface elements - For surface elements with a thickness of 2–8 mm - For subsequent installation in closed frame constructions - Installation of surface elements flush with the profile edge - The protective pane profile consists of the basic profile and the clip-on strip. Both profiles are required to ensure proper functioning. - Suitable for use under clean room conditions - Tested for emission of volatile organic substances at room temperature, 50 °C and 120 °C, Report No. BO 9903-161

Clamping profile 2S, N8 L3000 - For simple fastening of panes, surface elements or grilles on strut profiles - For subsequent installation in closed frame constructions - For surface elements of varying thicknesses - Profile finishing: through-hole for mounting screw

Strut profile 30x45° 20xL=5600mm

Carrying plate WT 2, ST 4.8 640/640 - For self-assembly of workpiece pallets for product support - Completely drilled and ready for assembly - 15 standard sizes in steel, 4.8 mm thick, with KTL (cataphoretic primer) coating - 10 standard sizes in aluminum, 8 mm thick - 13 standard sizes in aluminum, 12.7 mm thick - You will find drilling plans for identification and data storage systems in the RFID systems catalog - Can be combined with frame modules of WT 2 workpiece pallets

Clamping profile 1S, N10 L3000 - For simple fastening of panes, surface elements or grilles on strut profiles - For subsequent installation in closed frame constructions - For surface elements of varying thicknesses - Profile finishing: through-hole for mounting screw

WT 2 workpiece pallet, fully assembled 640x640 - Suitable for belt, toothed belt and flat top chain - Robust workpiece pallet with high rigidity - Integrated positioning bushings - Prepared for installation of mobile data tags of the ID 15 ID 40 and ID 200 identification systems - Not suitable for accumulation roller chains - Plastic frame modules with universal steel carrying plate - 15 standard sizes - Material:- Frame module polyamide (PA) wear pad- Steel carrying plate (4.8 mm)

Sliding door without superstructure B1500 - Assembly kit for constructing an EcoSafe sliding door without superstructure in the modular dimension system - Use of finished protective frame as a door - Rollers with ball bearings for smooth running - For doors that open to the left or right - Required components:–sliding door kit without superstructure– protective frame - Also available with leg sets with 45x90L profiles for more stability

Strut profile 90x90L 4N Q&E - Minimum profile lengths for profile finishing: see table

Strut profile 40x80L 3NVS Q&E - Minimum profile lengths for profile finishing: see table

Strut profile 80x80L 4NVS Q&E - Minimum profile lengths for profile finishing: see table

Strut profile 90x90L 4NVS Q&E - Minimum profile lengths for profile finishing: see table

Strut profile 45x90L 3NVS Q&E - Minimum profile lengths for profile finishing: see table

Strut profile 40x120x120L Q&E - Minimum profile lengths for profile finishing: see table

Strut profile 30x90 Q&E - Minimum profile lengths for profile finishing: see table