Bosch Rexroth Części zamienne do automatyki przemysłowej

HQ 5/H lift transverse unit - The HQ 5 lift transverse unit is a ready-for-operation module for branching transport. It lifts the workpiece pallet from the rollers and moves it transversely to the original conveyor direction via a driven roller section - Note: Note the orientation of the workpiece pallet after branching - Can be used with all WT 5 workpiece pallets - The transverse transport level is 4.5 mm above the transport level of the longitudinal section - Protective casing can also be removed in the case of low conveyor heights - Compressed air connection: 5 ... 6 bar - Pneumatic push-in fitting: 6 mm

DE 5 rotary unit - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 400 kg)

DE 5/FR rotary unit - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 400 kg)

Lift EL 2 - Lift for changing workpiece pallets between two different transport levels - Drive through synchronous servomotor MSM with absolute encoder- Interface: Plug-in connectors for encoder connection and power connection- Electrically released holding brake - Lift for conveying a workpiece pallet vertically from a lower conveying section to a higher conveying section or vice versa - Designed as a head lift - Suitable for use in an EPA - For all workpiece pallet dimensions up to 800 x 800 mm - Lower transportation height possible from 290 mm - Max. total workpiece pallet weight = 60 kg - Short cycle times of up to 7.9 s are possible - Strokes of up to 1500 mm can be achieved - Maintenance hatch for servicing purposes included - Options are available for protective cover material - The product to be transported must not exceed neither bWT nor IWT of the workpiece pallet

Rotate unit DE 2 - BG 1 - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 96 kg)

DE 5/OC rotary unit - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 400 kg)

Leg set SZ 2/LS MID - The leg sets support belt sections or linear section units with high loads and dynamics - They are only suitable for linear sections LS 2

Rotate unit DE 2 - BG 5 - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 240 kg)

Linear section LS 2 - The linear section LS 2 is a high-speed section driven by linear motors, fully assembled including guides for workpiece pallets WT 2/LS - For the design of a hybrid system by integrating the section LS 2 driven by linear motors in layouts of TS 2plus systems - Fast WT changeover times and thus reduced cycle times - Positioning without additional indexing - Transition to linear motor range "on the fly" - Impact-free stopping for gentle transport of sensitive products - Independent control of the WT 2/LS workpiece pallets with various motion profiles, also reversing

Leg set SZ 2/LS END - The leg sets support belt sections or linear section units with high loads and dynamics - They are only suitable for linear sections LS 2

Rotate unit DE 2 - BG 4 - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 208 kg)

Rotate unit DE 2 - BG 3 - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 160 kg)

Rotate unit DE 2 - BG 2 - The rotary unit is a module for the horizontal rotation and transport of workpiece carriers - With this, branch-offs and crossings are also possible for heavy workpiece pallets (up to 128 kg)

Longitudinal connector LV 2 - For establishing a stable connection between the leg sets SZ 2/LS END and SZ 2 LS/MID - For accommodating high loads and dynamics

Stop gate VE 5/D-1000-E - Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal. - Damped stopping of a workpiece pallet at the defined stop surface and for separating workpiece pallets - Electrical stop gate for the set-up of plants without pneumatic system - Can be combined with WT 5 - Little installation work as there is no pneumatic system - Low noise development - Loading only in the direction of transport - No spring return, the stop blade of the stop gate is reset or put up by means of a step motor - Hydraulic damping, not adjustable - Transportation Control

Stop gate VE 2/D410-EH - To the workpiece pallet separation in sections - Dampened stop gate - Can be combined with WT 2/H - Can be combined with all TS 2plus components - Loading only in the direction of transport - No spring return, the stop blade of the stop gate is reset or put up by means of a step motor - Electrical stop gate for the set-up of plants without pneumatic system - Little installation work as there is no pneumatic system - Low noise development - Notice: A workpiece pallet may only hit the stop if the latter is completely in its top position

Stop gate VE 5/OCD-1000-E - Please note that in the limit ranges of the permissible weight/speed combinations, the damping behavior may not be optimal. - Damped stopping of a workpiece pallet at the defined stop surface and for separating workpiece pallets - Electrical stop gate for the set-up of plants without pneumatic system - Can be combined with WT 5 - Little installation work as there is no pneumatic system - Low noise development - Loading only in the direction of transport - No spring return, the stop blade of the stop gate is reset or put up by means of a step motor - Hydraulic damping, not adjustable - Transportation Control - Installation location AO = 1: ST 5/OC; AS 5/OC; PE 5/OC; PE 5/OC-T - Installation location AO = 2: PE 5/OC; PE 5/OC-T (b = 455; lT = 455) - Installation location AO = 3: PE 5/OC (b = 455; lT = 650) - Installation location AO = 4: PE 5/OC-T (lT = 455; b = 650)

- The lift transverse unit is a module for branching transport. It lifts the workpiece pallet and moves it transversely to the original conveying direction via a driven roller section. - Notice:-This lift transverse unit is delivered without section.- Note the orientation of the workpiece pallet after branching.- When using the interface to SEW, the motor is in the direction of transport before HQ 5. - Can be used with all WT 5 workpiece pallets - The transverse transport level is 4.5 mm above the transport level of the longitudinal section - Protective casing can also be removed in the case of low conveyor heights - Compressed air connection: 5 ... 6 bar - Pneumatic push-in fitting: 6 mm - Drive possible with AB 5

- The belt section is a ready-to-use conveyor section with built-in drive for the transportation of workpiece pallets in the longitudinal direction or for the transverse conveying of the workpiece pallet between parallel conveyor sections in conjunction with two HQ 2 lift transverse units. - Reversible operation not permitted - Special models on request - Positioning of WTs in the area of the drive heads/return heads is not permitted. - With short, light workpiece pallets (lWT = 160, 240), it may be necessary to ensure that conveyor trenches are traversable by installing the included acceleration element. When doing so, note the following: Avoid accumulation above the acceleration element! Accumulation above the acceleration element causes severe roller wear and shortens the service life of the chain.