Panduit

The CT-1570 Contour Crimp™ Terminal Crimp Tool crimps non-insulated terminals, splices, disconnects and, insulated parallel splices. The controlled-cycle mechanism assures high quality, consistent terminations. The ergonomic, extended grip handles with flat surface mounting back assures operator comfort and convenience.

The CMSA12-2S-C300 Edge Clip with Cable Tie Mounts helps secure wire and cable bundles with versatile mounting to edges without adhesives or drilling. Pre-assembled with a cable tie for securing and routing cables parallel and adjacent to a 0.7mm to 3mm edge. Ideal for a range of applications such as automobiles, trains, heavy equipment, trucks, and solar. Color Black.

The TX6-28™ Cat 6 UTP Patch Cord is constructed of 28 AWG, unshielded, twisted pair, stranded, CM/LSZH cable with enhanced performance modular plugs. The use of 28 AWG cable ensures that this patch cord has a small diameter, making it easy to install and work with. The patented tangle free latch prevents snags and provides easy release saving time on frequent moves, adds, and changes. The patch cord is 5 feet in length, 0.150 inches (3.8mm) nominal in diameter, and green.

The T50FR-C20Y Polyethylene Spiral Wrap provides continuous abrasion protection for wires, cables, and tubing. The wrap harnesses multiple cables into a single manageable bundle while allowing for breakouts. Lightweight, flexible, durable protection for use with irregular shapes. Installation tool supplied. Rated for use up to 122°F (50°C). Flame-Retardant Polyethylene. 0.50" (12.7 mm) diameter for 3/8" – 4" (9.5 mm – 101.6 mm) bundle range. Color Black. 100' (30.5 m) long.

Ring terminal, large wire, 6 AWG, #10 stud size, non-insulated, standard package.

Vinyl cloth number, 2.00" (50.8mm) legend height, 2.25" (57.2) height, '4' (legend), black/yellow, vinyl cloth, 10 markers/card, 25 cards/package.

The SGABM25-AT-C0 super grip acrylic-based adhesive backed cable tie mounts are made of weather resistant Nylon 6.6 and are for use with miniature and intermediate Super-Grip cross-section cable ties. Designed for outdoor use, especially in high-temperature environments. They measure 1.0" x 1.0" (25.4mm x 25.4mm), supplied in strips of 2, are black in color and come in packages of 100.

StrongHold PCM-4 Pre-Printed Wire Marker Cards allow for “kitting” in project builds. They are printed on vinyl cloth with a plastic liner that provides easy removal of markers while protecting unused markers. Markers are durable enough for up to 5 years and are designed to withstand various outdoor environments. Legend: 4, 36 markers per card, and 25 cards per package.

Dome-Top® barb ty marker tie, wrap, miniature cross section, 4.2 (107mm) length, .29 x 1.09 (7.4 x 27.7mm) marker write-on area, nylon 6.6, natural, standard package.

The end cap fitting is used to terminate or allow entry to T-70 raceway with conduit breakouts of 1/2". It is Off-White.

The power rated outside corner fitting is rated for applications up to 600V. It is designed for use with the LDPH5 and is White.

Wire Marker Card, Vinyl Cloth, 'B'

The 4-way adhesive backed cable tie mount in white is mounted with acrylic adhesive tape. It is 1.5" long x 1.5" wide (38.1 x 38.1 mm) and made of nylon 6.6, which increases mechanical strength, heat and wear resistance, and stiffness. It is used with miniature, intermediate, standard, light-heavy, heavy, and hook and loop mount cable ties. It is designed for indoor, high-temperature environments and comes in packages of 200.

Panduit’s MTP2H-E6-C Multiple Tie Plates are designed to secure bundles that are closely spaced. With their low profile design, bundles stay close to mounting surface making them ideal for areas where overhead space is limited. These mounts can be used with miniature through heavy cable ties and are intended for use in indoor environments. Supports two bundles and uses #6 (M3) screws. Made of Nylon 6.6, are natural in color and come in packages of 100.

Wire Marker Card, Vinyl Cloth, '8'

The IndustrialNet™ Cat 5e UTP bulkhead 8-position connector with protective cap is ideal in manufacturing environments. The UTP bulkhead connector features a RJ45 jack. The bulkhead provides an IP67 rated seal that provides protection from dust and temporary immersion in water. It terminates to a 4-pair, 24 AWG, 100 ohm twisted pair cable and does not require a punchdown tool.

The SD3EMI Panduct PanelMax Noise Shield Kit reduces EMI/RFI noise between wiring for up to 20dB reduction in noise, or 90% NVR (equivalent to 6" of air spacing). Installs easily within Panduit wiring duct or when mounted separately. Segmented design for cutting into shorter sections. Designed for 3" high wiring duct. Zinc-Plated Steel. Kit includes two 3-foot sections, bonding clips, and anti-oxidizing paste. Color Black. 1 per package.

StrongHold ESV14BX-Q Contractor Grade Vinyl Insulated Butt Splices are a reliable and economical option that withstand a wide range of general-purpose applications. They are designed to splice two solid or stranded wires together to repair or lengthen wires. Accommodates 16-14 AWG, are blue in color, and come in packages of 25.

The T-45 Snap-On Hinged Data Bracket is a vertically slopped data outlet with four ports. It is Off-White.

The C.5LG6 PVC Flush Wiring Duct Cover features a non-slip, liner to prevent cover slide. Designed with the user in mind, the cover is easy to install and remove. The general-purpose lead-free PVC material is suitable for use in indoor applications. UL 94 flame class of V-0 with a UL recognized continuous-use temperature up to 122°F (50°C). 0.23" x 0.69" (5.8 mm x 17.5 mm) and 6' (1.83 m) long. Color Light Gray. 6 per package.