Phoenix Contact Części zamienne do automatyki przemysłowej

The SACC-M12MS-8QO SH ETH data connector is designed for Ethernet applications, supporting a transmission speed of 1 Gbps. With an 8-position configuration, this connector is halogen-free and shielded, ensuring reliable data transfer in various environments. Constructed with a zinc die-cast knurl that is nickel-plated, it provides durability and corrosion resistance. The external cable diameter ranges from 5 mm to 9.7 mm, accommodating different cable sizes. The connector's straight cable outlet configuration allows for easy installation. It meets rigorous standards, including fire protection requirements for rail vehicles as per DIN EN 45545-2, and offers a degree of protection rated at IP65. The ambient operating temperature for both male and female connectors spans from -40 °C to 85 °C, making it suitable for harsh conditions. The unit weighs approximately 39.321 g including packing, with a tightening torque specification of 5 Nm for the pressure nut. This product also features an insulation resistance of ≥ 100 MΩ and a nominal voltage of 48 V AC, allowing for reliable connections even in demanding situations.

The DFK-PC 5/ 8-GF-SH-7,62 is a feed-through header designed for efficient electrical connectivity. With a nominal cross section of 6 mm² and a maximum nominal current of 41 A, it is suitable for various applications requiring high current handling. The component is rated for a voltage of 630 V under standard conditions, ensuring reliable performance in demanding environments.Constructed with a tin contact surface, this header features a male connector configuration and offers 8 potentials arranged in a single row. It includes 8 positions, each capable of accommodating 3 solder pins per potential, with a pin layout that allows for linear pinning. The pitch of 7.62 mm facilitates easy integration into existing systems.For mounting purposes, the device employs wave soldering techniques and is designed for screw locking, adding to its stability during operation. It is packaged in cardboard for efficient storage and transport. The header is compliant with WEEE/RoHS regulations and is constructed to minimize whisker formation as per IEC 60068-2-82/JEDEC JESD 201 standards.This product is also characterized by its durability, with an operating temperature range from -40 °C to 100 °C, making it suitable for a variety of environments. The housing is green (6021) and made from PA, with a comparative tracking index (CTI) of 600, ensuring safe and reliable operation.

The SACC-MINFS-3CON-PG13 is a universal connector designed for a 3-position configuration, equipped with a straight socket utilizing a 7/8"-16UNF A-coded screw connection. Constructed from zinc die-cast material that is nickel-plated, this connector ensures durability and reliability in various applications.It supports an external cable diameter ranging from 10 mm to 12 mm and features a Pg13.5 cable gland. The connector's dimensions include a width and height of 27 mm, and a length of 84 mm, while the housing diameter is also 27 mm. It operates effectively within an ambient temperature range of -25 °C to 85 °C.For connection, it allows for both ferrule and non-ferrule wiring, accommodating a connection cross-section from 0.34 mm² to 1.5 mm² (AWG 22 to 16). The connector provides a rated surge voltage of 4 kV and a nominal current of 12 A, ensuring robust performance with a contact resistance of ≤ 5 mΩ and an insulation resistance of ≥ 100 MΩ. It is rated for at least 100 insertion/withdrawal cycles and has a degree of protection rated at IP67, making it suitable for various industrial environments.

The PTFIX 6/18X2,5-NS15A GN distribution block supports bridging between multiple units through the conductor shaft. It is optimized for a nominal voltage of 690 V, with a nominal current rating of 24 A. The connection method employed is a push-in design, accommodating conductor cross-sections ranging from 0.14 mm² to 4 mm², with a rated cross-section of 6 mm².This block is mounted using NS 15 and is colored green. It features a total of 19 connections per level, functioning effectively within an overvoltage category of III and a pollution degree of 3. The rated surge voltage is 8 kV, and the maximum power dissipation under nominal conditions is 0.77 W.Constructed from PA insulating material, it has a temperature range for operation from -60 °C to 110 °C, with a relative insulation material temperature index of 130 °C. It meets various fire protection standards for rail vehicles and provides reliable performance across a wide range of environmental conditions.

The UM-ALU 4 AU45 L60 is a profile cover constructed from anodized aluminum, showcasing a width of 45.6 mm and a length of 60 mm. The external profile width measures 45.6 mm while the internal width is 42 mm, and the depth is 28.1 mm. This housing is designed for screw mounting and is suitable for various applications with an operational temperature range of -40 °C to 100 °C, contingent upon power dissipation.With an IP40 rating, this product offers protection against solid objects larger than 1 mm, but does not provide moisture protection. It accommodates a PCB thickness between 1.44 mm and 2 mm, featuring four PCB holders and a mounting type that aligns parallel to the DIN rail. The total PCB surface area ranges from 1640 mm² to 2302 mm², depending on the side elements used.Manufactured in Hungary, the product weighs 33.5 g and is packaged in a cardboard carton, ensuring safe transport and storage. The absence of ventilation openings contributes to its robust design, making it suitable for various industrial applications.

The D-SUB contact insert is tailored for PCB assembly with a shell size of 1 and consists of nine signal contacts. With an angled design, it facilitates easy installation using a 2.5 mm hole and is intended for use with the panel mounting frame VS-09-BU-DSUB-LH-B. This component is produced in Germany and is shielded to ensure reliable performance. Its rated voltage is 400 V in accordance with IEC 61076-2-101, while it supports rated currents of up to 5 A at 20 °C. The connection method employs wave soldering contacts, and the insert is constructed with a metal housing that is metal-plated, ensuring durability and robustness. The contact material is a copper alloy with a gold surface finish, providing excellent conductivity.Additional specifications include a width of 20.2 mm, height of 12.93 mm, and length of 31.19 mm. The product is rated for an ambient temperature range of -55 °C to 125 °C, and it meets overvoltage category III standards with a rated surge voltage of 1 kV. The D-SUB contact insert is also designed for a minimum of 200 insertion/withdrawal cycles, with a maximum insertion force of 3.40 N per signal contact. Its degree of protection is IP20, making it suitable for various applications.

The PTFIX 4/12X1,5-G WH is a distribution block characterized by its nominal current rating of 41 A. It utilizes a push-in connection method, which simplifies installation and ensures a secure connection. The rated cross section is 4 mm², accommodating conductor cross sections from 0.2 mm² to 6 mm² for line contacts. Additionally, load contacts support a cross section range of 0.14 mm² to 2.5 mm².This product features an adhesive mounting type and is available in white. It is designed to meet stringent standards, including IEC 60998-2-2, and operates effectively within an ambient temperature range of -35 °C to 110 °C. The distribution block is suitable for environments with a permissible humidity of 20% to 90% during operation.With dimensions of 31.4 mm in width, 21.6 mm in height, and 18.7 mm in depth, the block’s design incorporates materials that comply with flammability ratings as per UL 94 V0. It also meets various fire protection standards for rail vehicles, ensuring safety in critical applications.

The M23 device connector front mounting, designated as M23-7ES198AA600S, is designed for versatile applications with an angled rotatable configuration. It supports a total of eight positions, configured as 4+3+PE, utilizing a socket type connection with crimp capability. The flange dimensions measure 28 mm x 28 mm, making it suitable for various mounting scenarios.Manufactured in Germany, this connector is part of the M23 PRO product family and is constructed from durable materials, including a PA 6.6 insulating body and a GD-Zn housing. It offers a high degree of protection rated at IP66/IP68 (2 m / 24 h) and IP69K, ensuring reliability in challenging environments.The operational temperature range extends from -40 °C to 105 °C, with a permanent temperature rating of 125 °C according to DIN EN 60512-9-2 for 1000 hours. The connector is rated for a maximum current of 30 A and a voltage of 630 V for the primary contact group, and 9 A at 250 V for the secondary contact group.For installation, the connector features a front mounting design with a square flange and requires specific crimp contacts, which must be ordered separately. It is essential to observe the derating curve during operation and adhere to the safety note that warns against connecting or disconnecting under load.

The feed-through connector, designated as DFK-PC 16/ 8-ST-10,16, is designed for robust electrical interconnections. It has a nominal current rating of 76 A and supports a rated voltage of 1000 V (III/2). The connector's contact surface is made of silver, ensuring reliable conductivity.With 8 potentials organized in a single row, it accommodates a pitch of 10.16 mm. The screw connection method, featuring a tension sleeve, allows for secure attachment while maintaining a conductor to PCB connection direction of 0 °. The plug-in system is compliant with COMBICON PC 16 standards.Additional specifications include a width of 100.72 mm, height of 30.55 mm, and length of 56.5 mm. The housing is colored green and constructed from PA insulating material, providing a flammability rating of V0 and a glow wire ignition temperature of 775 °C.This connector is suitable for use in various applications that require reliable electrical connections while adhering to IEC 61984 standards.

The EV-CC-AC1-M3-CBC-SER-HS charging controller is specifically designed for the efficient charging of electric vehicles within 3-phase AC networks, adhering to the IEC 61851-1 standard, Mode 3. This unit is equipped with comprehensive charging functionalities, configuration capabilities, and a locking controller, all housed within a compact design suitable for DIN rail mounting.It operates in a stand-alone mode and supports a supply voltage range from 100 V AC to 240 V AC, with a nominal voltage of 230 V. The controller features a maximum current consumption of 40 mA and a low power consumption, ensuring energy efficiency during operation. Notably, it includes an integrated release function for the locking actuator, allowing for safe disconnection of the infrastructure plug in the event of a mains failure.With a robust design, the controller is protected to IP20 standards and can function in ambient temperatures ranging from -35 °C to 70 °C, ensuring reliability in various environments. It boasts an RS-485 interface for communication, facilitating integration into existing systems and supporting Modbus/RTU protocols for data exchange. This unit's designation code is EV-CC-AC1-M3-CBC-SER-HS, which identifies it within the CHARX control basic product family, ensuring compatibility with a range of electric vehicle charging applications.

The EMM 3-24DC/500AC-160-EXM-IFS is an electronic machine management system that operates with an external current transformer rated for 160 A. This device enables precise measurement of energy and active power for motors and various three-phase loads. It features adjustable switching and signaling thresholds, allowing for custom configurations to suit specific applications.With a rated control circuit supply voltage of 24 V DC and a range from 19.2 V DC to 30 V DC, the system supports a maximum power dissipation of 2.5 W under nominal conditions. It operates with an accuracy of 0.5%, facilitating reliable monitoring and control. The Designation Code for this product is EMM 3-24DC/500AC-160-EXM-IFS.The device can handle a power range from 350 W to 111 kW at 400 V AC, with a current range of 0.5 A to 160 A. It is equipped with four inputs and four outputs, providing flexibility in configuration. The outputs operate at a nominal voltage of 24 V DC, with a continuous load current of 500 mA.Constructed for durability, the device has an ambient temperature operating range from -25 °C to 70 °C and is compliant with UKCA standards. The degree of protection is rated at IP20, making it suitable for various industrial environments. The system can be mounted on DIN rails and is designed for easy installation with connections via a D-SUB socket strip.

The UCT-WMCO 2,9 (12X4) YE conductor marking sheet is designed for efficient wire labeling in various applications. This product features a yellow color (RAL 1018) and provides an unlabeled surface suitable for customization using advanced identification technologies such as TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, and others.Constructed to accommodate cable diameters from 2 mm to 2.9 mm, it offers a lettering field dimension of 12 mm in length and 4 mm in width. This marking sheet contains 32 individual labels, organized in rows of 8 for practical use.In adherence to industry standards, the product is wipe-resistant according to DIN EN 61010-1 and has a flammability rating of UL 94 V0. It operates effectively within an ambient temperature range of -40 °C to 120 °C, and it is recommended to store it at 23 °C with 50% relative humidity to maintain quality.This conductor marking sheet is compliant with DIN EN 45545-2 fire protection regulations for rail vehicles, ensuring safety across applications. It is free from silicone, halogen, and cadmium, making it a suitable choice for environmentally conscious projects.

The D-SUB contact insert, designated as CUC-DSI-Y1STZ-A/DSLSA15:50, is specifically constructed for PCB mounting applications. This model is characterized by its socket-type contact configuration and includes 15 signal contacts. The insert is designed for angled installation and is secured using 4-40 UNC threads along with solder pins, compatible with the VS-15-... panel mounting frame.Manufactured in Germany, this component adheres to the overvoltage category III, with a rated voltage of 125 V and a rated current of 5 A. The product's dimensions are 39.3 mm in width, 17.3 mm in height, and 21.6 mm in length. Its housing is made of metal, while the contacts are composed of a copper alloy with a hard gold plating over nickel, ensuring reliable connectivity. The contact carrier is made from polyester GF, and the component meets the flammability rating of V0 according to UL 94.

Introducing the FKCVW 2.5mm² Female Connector, a high-quality component designed for reliable electrical connections in various applications. This connector boasts a nominal cross-section of 2.5 mm² and is available in a vibrant green color. It is rated for a nominal current of 12 A at a voltage of up to 320 V (III/2).Constructed with tin contacts, this connector offers excellent conductivity and durability. The female design ensures secure and efficient connections. With 4 potentials arranged in a single row, it provides ample space for multiple connections.The FKCVW 2.5mm² Female Connector is part of the FKCVW 2,5/..-STF product range. It features a pitch of 5 mm and employs a push-in spring connection method for easy conductor and PCB alignment. The conductor and PCB connection direction is at -90°.Equipped with a locking clip, this connector ensures secure connections. It also supports the COMBICON MSTB 2,5 plug-in system and utilizes screw locking for robust mounting. The screw flange design allows for easy installation. This product is packaged in cardboard for safe delivery.

The PT 6-FE Terminal Block is a high-quality feed-through terminal block designed for industrial applications. With a nominal voltage of 1000 V and a nominal current capacity of 41 A, this terminal block ensures reliable electrical connections. The connection method is Push-in, which allows for easy installation and maintenance. The PT 6-FE Terminal Block features a rated cross section of 6 mm² and a cross section range from 0.5 mm² to 10 mm². This versatility makes it suitable for various applications, while the NS 35/7.5 and NS 35/15 mounting types ensure compatibility with different systems. The PT 6-FE Terminal Block is available in a black/yellow color scheme, enhancing its visibility and durability. This terminal block is an essential component for any industrial automation system, providing reliable electrical connections while ensuring safety and efficiency.

The Device Connector Front Mounting, designated with the code ST-7ES1N8AWQ00S, is designed for standard and SPEEDCON interlock applications. It features a straight configuration with a total of 8 positions, including 7+PE, and employs a crimp connection method.The connector is shielded and utilizes a flange with dimensions of 21.6 mm x 21.6 mm, ensuring a secure fit. With an IP67 degree of protection, it is suitable for various environmental conditions, allowing operation in temperatures ranging from -40 °C to 125 °C. The housing is constructed from GD-Zn, while the rotating parts are made of CuZn, and the insulating body is comprised of PA 6.6.Notable specifications include a nominal current of 14 A and a nominal voltage of 630 V, with an overvoltage category of III and a rated surge voltage of 6 kV. It is important to note that connectors should not be plugged in or disconnected under load to prevent damage.

The HBUS 107,6-16P-1S BK P1 is designed for DIN rail mounting and operates at a nominal current of 3 A, with a maximum total current rating of 25 A. The connector accommodates 16 positions with a pitch of 2.54 mm. The housing is black and made from durable PA insulating material.With a rated voltage of 30 V and an impulse withstand voltage at sea level of 0.91 kV, this connector meets stringent electrical standards. It is compliant with IEC 60664-1:2007-04, indicating its reliability in various applications. The connector supports a wide range of operating conditions, functioning within an ambient temperature range of -40 °C to 105 °C, depending on the derating curve.Additionally, it exhibits superior contact resistance, measuring 23.9 mΩ, which ensures stable electrical connectivity. The surface of the contacts is completely gold-plated, enhancing its corrosion resistance and electrical performance. The connector has been tested against various environmental factors, including thermal stress at 100 °C for 168 hours and exposure to corrosive environments.

The PTFIX 4X1,5 BN is designed for efficient electrical connections with a nominal voltage of 450 V and a maximum current rating of 17.5 A. It incorporates a push-in connection method, allowing for a flexible cross section of 0.14 mm² to 2.5 mm², and can be mounted directly onto a DIN rail adapter or through direct flange installation.With a compact design measuring 8.3 mm in width, 21.6 mm in height, and 17.7 mm in depth, this block is finished in brown (RAL 8028) and is constructed from PA insulating material, which provides a temperature index of 125 °C. The block is designed to withstand ambient temperatures from -60 °C to 110 °C for operation, demonstrating its robust performance in various environmental conditions.This unit can bridge with other blocks via the conductor shaft, enhancing wiring flexibility. For optimal installation, it is recommended to use a DIN rail adapter beneath the connection points. The distribution block is compliant with IEC 60998-2-2 standards, ensuring reliability in various applications.

The EH 22,5 F-C SS/ABS GY7035 serves as the upper component of a DIN rail housing, characterized by its flat design and a single connection opening on one side. With precise dimensions of 22.6 mm in width, 75.26 mm in height, and 36.95 mm in depth, this housing is finished in light grey (RAL 7035).Manufactured from ABS material, it complies with the flammability rating of HB as per UL 94 standards. It offers a maximum of 4 positions with a pitch of either 5 mm or 5.08 mm. The housing’s design includes ventilation openings and is suitable for various temperature ranges, supporting operational conditions from -40 °C to 80 °C.In terms of assembly, it utilizes a snap-in mounting type and can accommodate PCBs through a slot configuration. The product is packed in cardboard, with the outer packaging in carton form, ensuring safe transport and storage. The ambient temperature for storage and transport is maintained between -40 °C and 55 °C, while relative humidity can reach up to 95%.

The Relay Module PLC-RSC-12DC/21HC/EX is structured for DIN-rail mounting and includes a basic terminal block with a width of 14 mm, utilizing a screw connection. It operates with a nominal input voltage of 12 V DC, capable of handling high continuous currents with a typical input current of 33 mA. This module features a plug-in relay with a 10 A power contact and a single changeover contact. With a mechanical service life of 3 x 107 cycles and a maximum switching voltage of 250 V AC/DC, it maintains safe isolation and is compliant with ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2 standards. The device supports a broad input voltage range from 10.3 V DC to 16.8 V DC at 20 °C, ensuring versatility in various applications. Additional features include reverse polarity protection, a yellow LED for operating voltage display, and a contact material of AgNi. The relay demonstrates a typical response time of 8 ms and a release time of 10 ms, enhancing its operational efficiency. It is also rated for an ambient temperature range of -40 °C to 60 °C, making it suitable for diverse environmental conditions. The relevant Designation Code for this product is PLC-RSC-12DC/21HC/EX.