Phoenix Contact Części zamienne do automatyki przemysłowej

The PT 4-PE/3L motor terminal block is engineered with a four-level configuration suitable for various industrial applications. It utilizes a push-in connection method, allowing for efficient wiring with conductor cross sections ranging from 0.2 mm² to 6 mm² and corresponding AWG sizes from 24 to 10. With a compact width of 6.2 mm and a height of 95.4 mm, this terminal block is designed for mounting on DIN rails, specifically NS 35/7.5 and NS 35/15.This terminal block is manufactured in Poland and includes a total of 7 connections across 4 rows, enabling multiple potential connections. The rated surge voltage is 6 kV, and it supports a nominal current of 26 A at a 4 mm² conductor cross section, with a maximum load current of 32 A at 6 mm². The ambient operating temperature range is extensive, from -60 °C to 110 °C, making it suitable for harsh environments.Constructed from PA insulating material, the terminal block also meets rigorous flammability standards, including UL 94 V0. It is designed to withstand various environmental conditions, ensuring reliable performance in critical applications.

The marker strip, designated as ZB 12 CUS, is engineered for integration into terminal blocks with a width of 12.2 mm. This strip is crafted from PA material, ensuring compatibility with ambient temperatures ranging from -40 °C to 100 °C. The labeling field measures 10.5 mm in width and 12.15 mm in height, facilitating clear identification. Each strip contains five individual labels, with a high slot type for secure mounting.For compliance, this product adheres to the wipe resistance standard DIN EN 61010-1 (VDE 0411-1) and achieves a flammability rating of V2 according to UL 94. The marker strip is available upon request, with a minimum order quantity of one piece. Each unit weighs 1.55 g and is free from silicone and halogen, ensuring safe use in various environments.

The CA-12P1N12HZ00 is an M23 device connector designed for rear wall mounting, providing a reliable solution for various signal applications. This unit is equipped with a straight design and shielded construction, ensuring effective performance in challenging environments.With 12 positions available, the connector utilizes pin contacts and features a solder cup connection method. It is suitable for standard applications and SPEEDCON interlock systems. The connector operates within a temperature range of -40 °C to 125 °C and has a high degree of protection (IP67) when plugged in, making it suitable for demanding conditions.The device connector is compliant with RoHS II standards, specifically without Exemption 6c, and is constructed from durable materials including PBT for the insulating body and CuZn for the contacts, which are plated with nickel and gold for enhanced conductivity. The connector supports a rated voltage of 48 V AC and a maximum current of 8 A per contact group, ensuring robust electrical performance.

The Digital Module IB IL 24 DO 8-PAC is an inline, digital output terminal designed for reliable and efficient operation. It supports up to 8 digital outputs at a voltage of 24 V DC with a current rating of 500 mA. The module features a robust 4-conductor connection technology that ensures seamless data transmission at speeds of up to 500 kbps in the local bus. The Digital Module IB IL 24 DO 8-PAC is engineered with a degree of protection of IP20, making it suitable for various industrial applications. It comes complete with inline connectors and marking fields for easy identification and integration into your system.

This socket is designed for pin connector pattern type CF and incorporates a screw connection along with an integrated fuse. It is suitable for both DIN rail mounting in the service interface and direct installation. The device operates at an ambient temperature range of -20 °C to 60 °C and is rated for 250 V AC with a maximum current of 16 A. With dimensions of 45 mm in width, 75 mm in height, and 60 mm in depth, it accommodates a range of conductor cross sections, supporting solid conductors from 0.2 mm² to 4 mm² and flexible conductors from 0.2 mm² to 2.5 mm². The device complies with VDE 0620-1 standards and has a flammability rating of V0 according to UL 94. Environmental compliance is ensured with REACh SVHC regulations, specifically for lead (CAS 7439-92-1), and it meets China RoHS standards, indicating no hazardous substances above threshold values and an unlimited environmentally friendly use period.

PCB connector, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 16, number of rows: 1, number of positions: 16, number of connections: 16, product range: FKCVR 2,5/..-STF, pitch: 5.08 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 90 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: Screw locking, mounting: Screw flange, type of packaging: packed in cardboard

The surge protection device, designated as TTC-6P-3-HF-M-12DC-PT-I, is designed for high-frequency applications and telecommunications interfaces without supply voltage. It includes a protective plug and base element, featuring an integrated status indicator and knife disconnection for three signal wires that share a common reference potential. This device is suitable for operation in environments classified under Ex e approval for zone 2. It supports a nominal voltage of 12 V DC and has a maximum input current of 600 mA, making it versatile for various applications. The device's dimensions include a width of 6.2 mm and a height of 105.8 mm, which facilitate its installation on a DIN rail. With an operating temperature range of -40 °C to 85 °C and a pollution degree of 2, this device is engineered to perform reliably in challenging conditions. The surge protection levels ensure that voltage transients are effectively managed, with voltage protection levels of ≤ 145 V for line-line and ≤ 80 V for line-earth scenarios. The response time is ≤ 1 ns, allowing for swift reaction to surges. Constructed from PBT, the device meets the flammability rating of UL 94 V-0 and operates within a degree of protection rated at IP20. The surge protection fault message is conveyed optically, ensuring clear status indication for maintenance and monitoring.

The SACC-M 8MS-4QO-0,25-M is a universal connector designed for M8 applications, featuring a straight plug configuration with A-coding. It accommodates 4 positions and is suitable for a range of cable diameters from 2.5 mm to 5 mm.Constructed with a knurl made of zinc die-cast and nickel-plated for durability, this connector has a compact length of 43.4 mm and a housing diameter of 12.5 mm. The connection method is insulation displacement, supporting wire cross sections from 0.08 mm² to 0.25 mm² (AWG 28 to 24). Rated for a nominal voltage of 30 V AC and a nominal current of 4 A, it ensures reliable performance with a rated surge voltage of 0.8 kV.With an insertion and withdrawal cycle life of at least 100 cycles, this connector exhibits a low contact resistance of ≤ 5 mΩ and high insulation resistance of ≥ 100 MΩ. It operates effectively across a temperature range of -25 °C to 80 °C and is designed to meet the IP65 protection standard, making it suitable for various industrial environments. The assembly note advises observing permissible bending radii to maintain protection integrity.

The PST 1,0/16-3,5 pin strip features a nominal cross section of 0.5 mm² and is designed for male connector applications. This component supports up to 8 A nominal current, contingent upon the plug utilized, with a rated voltage of 250 V (III/2). The product is characterized by a linear pin layout and contains 16 positions across a single row, making it suitable for various electronic connections. Constructed from highly temperature-resistant plastic, this pin strip is compatible with the reflow soldering process. It is packaged in cardboard and employs THR (Through-Hole Reflow) soldering for mounting. The contact surface is tin-plated, providing reliable connectivity with a contact resistance of 1.8 mΩ. Notably, the product adheres to WEEE/RoHS compliance standards, ensuring it is free of whiskers as per IEC 60068-2-82 and JEDEC JESD 201. With dimensions of 56 mm in width, 13 mm in height, and an installed height of 9.2 mm, the pin strip's solder pin length measures 3.8 mm, offering efficient fitting into corresponding connectors. The locking mechanism is absent, simplifying the connection process.

Safety relay for monitoring non-equivalent signal generators up to SIL 3, Cat. 4, PL e, 2-channel, non-equivalent operation, automatic start, 1 enabling current path, US = 24 V DC, fixed screw terminal block

The device marker, identified by the designation code LS-EMLP (45X15) SR, is designed for various labeling applications. This product comes as a sheet of silver-colored ABS material, featuring an adhesive mounting type.Each marking area measures 45 mm in width and 15 mm in height, providing ample space for clear identification. The sheet consists of 30 individual labels that can be customized using TOPMARK NEO or TOPMARK LASER technologies. The device marker adheres to the standards of wipe resistance set by DIN EN 61010-1 (VDE 0411-1).Operating under ambient conditions ranging from -20 °C to 85 °C, it is recommended to store the product at 23 °C with 50% relative humidity in a dry, dark environment within its original packaging. The adhesive strength is rated at 50 µm, ensuring reliable attachment.With a foil strength of 800 µm, this device marker is built to withstand various environmental factors. Compliance with testing for paint wetting impairment substances confirms that the product is free from silicone and halogen, making it suitable for sensitive applications.

The feed-through header, designated as DFK-MSTBA 2,5/ 9-GF-5,08, is designed for use in various electrical applications. It possesses a nominal cross section of 2.5 mm² and allows for a maximum nominal current of 12 A. With a rated voltage of 320 V, the device is suitable for diverse operational settings.This component is characterized by its male connector type and accommodates 9 potentials across a single row, featuring a total of 9 positions and connections. The header is intended for wave soldering installation, utilizing a linear pin layout with a pitch of 5.08 mm. Each potential is equipped with one solder pin, measuring 3.2 mm in length.The locking mechanism is implemented through screw locking, and the mounting method involves a threaded flange. The contact surface is tin-plated, ensuring effective connectivity, while the insulating material is made of PBT, classified under group IIIa, with a comparative tracking index (CTI) of 225. Compliance with relevant standards such as IEC 61984 is ensured, and the component is WEEE/RoHS-compliant.Dimensions include a width of 75.48 mm, height of 20.07 mm, and length of 12 mm, making it compact for integration into electronic systems. The operating temperature range is extensive, supporting ambient temperatures from -40 °C to 100 °C, contingent on derating. This header is packaged in cardboard and is manufactured in Poland.

This plug-in surge arrester complies with Type 2/Class II standards, specifically tailored for 3-phase power supply systems that utilize a 5-conductor configuration: L1, L2, L3, N, and PE. It incorporates a remote indication contact for monitoring surge protection status.Manufactured in Germany, this DIN rail module is a divisible two-section device with three positions. It operates effectively within the IEC power supply system TN-S, supporting nominal voltages up to 400/690 V AC and a maximum continuous operating voltage of 440 V AC. The surge protection fault message is indicated optically and through a remote indicator contact.The device is equipped with a nominal discharge current rating of 20 kA and can withstand a maximum discharge current of 40 kA, ensuring reliable performance under surge conditions. Its design includes a robust housing made from PA 6.6-FR 20% GF with a flammability rating of UL 94 V-0, and it can function optimally in ambient temperatures ranging from -40 °C to 80 °C.Compliance with EN 61643-11 standards assures suitability for various applications, while its IP20 protection rating signifies its intended use within controlled environments. The surge arrester's compact dimensions (49.2 mm width, 97.9 mm height, and 74.5 mm depth) facilitate easy integration into existing installations.

The M23 device connector, designated as CA-06S1N126Z00, is engineered for front mounting applications with a straight configuration and a shielded design. It supports a total of 6 positions and is equipped with a socket-type contact employing solder connections.This connector operates within a rated voltage of 48 V AC and is designed to withstand a rated surge voltage of 1.5 kV, classified under overvoltage category III. The unit features an axial seal for enhanced protection, achieving a degree of protection rated at IP67 when plugged in, making it suitable for demanding environments.Manufactured in Germany, the insulating body is comprised of PBT, while the contact is constructed from CuZn with a nickel-gold surface finish. Notably, this product complies with RoHS II standards without Exemption 6c (Pb

The Coupler connector ST-5ES1N8A9003S is engineered with a straight design suitable for both standard and SPEEDCON interlock applications. It features a total of 5+PE positions, ensuring versatility in connectivity. The connector utilizes socket-type contacts and is shielded for enhanced protection.With a degree of protection rated at IP67, this connector is suitable for challenging environments. It accommodates cable diameters ranging from 5 mm to 8 mm, allowing for a variety of cable types to be used. The connection method is via crimp, facilitating secure and reliable connectivity.This product is constructed to operate effectively in ambient temperatures from -40 °C to 125 °C and is capable of withstanding altitudes up to 3000 m. The materials used include GD-Zn for the housing and CuZn for rotating parts, with a nickel surface finish enhancing durability. The insulating body is made of PA 6.6, and the seal is composed of FPM (O-ring).For electrical specifications, it supports a nominal current of 14 A and a nominal voltage of 630 V, with an overvoltage category of III and a rated surge voltage of 6 kV. The connector's degree of pollution is rated at 3, ensuring reliability in various operational conditions. Note that crimp contacts with a diameter of 1 mm must be ordered separately. Caution should be observed as connectors should not be plugged in or disconnected under load to prevent damage.

The MINI MCR-SL-UI-I-LP-NC signal conditioner functions as a 2-way loop-powered isolating amplifier, offering output-side supply. Configuration is achieved through DIP switches, ensuring flexibility in setup. This device is characterized by its electrical isolation capabilities, which include 2-way isolation between input and output, making it suitable for a variety of applications.With an alignment span and zero adjustment of ± 2 %, the device maintains precision, while its limit frequency of approximately 30 Hz allows for effective signal processing. The signal conditioner supports both voltage and current input signals, with voltage input ranging from 0 mV to 1000 mV and current input from 0 mA to 40 mA. It is also capable of outputting a current signal from 4 mA to 20 mA, with a maximum output limit of 35 mA.The device adheres to various safety and regulatory standards, including EN 61000-4-6, and features basic insulation with a rated insulation voltage of 50 V AC/DC. Its robust design includes a degree of protection rated at IP20, making it suitable for indoor applications. The operating temperature ranges from -25 °C to 70 °C, while storage and transport conditions allow for temperatures from -40 °C to 85 °C.Constructed from PBT housing material and compliant with fire protection standards for rail vehicles (DIN EN 45545-2), the signal conditioner is designed for use in demanding environments. Additionally, the device is UL 508 Listed, ensuring reliability and conformity to safety regulations.

Bezpieczny i przyjazny dla narzędzi montaż złączy wtykowych M8 za pomocą nakrętki radełkowanej 1208474 firmy Phoenix Contact. Ta specjalistyczna nakrętka została zaprojektowana, aby zapewnić solidne i niezawodne rozwiązanie mocujące do złączy M8 w różnych zastosowaniach przemysłowych.1208474 posiada radełkowane radełkowanie i średnicę radełkowania 12 mm, co pozwala na łatwe ręczne dokręcanie, szczególnie w ciasnych przestrzeniach. W sytuacjach wymagających większego momentu obrotowego jest również kompatybilny z napędem sześciokątnym 4 mm, zapewniając wszechstronność metod montażu. Nakrętka firmy Phoenix Contact jest niezbędnym akcesorium do bezpiecznego wykonania połączeń, zapobiegania poluzowaniu w wyniku wibracji i zapewnienia długotrwałej integralności połączeń czujnika i elementu wykonawczego M8. Jego wytrzymała konstrukcja gwarantuje niezawodne działanie w wymagających środowiskach przemysłowych.

The UC-EM (19X9) YE snap-in markers are designed for efficient labeling in various applications. Each sheet contains 20 yellow markers that can be customized using labeling technologies such as BLUEMARK ID COLOR and CMS-P1-PLOTTER. The markers are intended to snap into a marker carrier, ensuring secure mounting.With dimensions of 19 mm in width and 9 mm in height, these markers are tailored for precise identification. They are engineered to withstand a broad operational temperature range from -40 °C to 120 °C, making them suitable for diverse environments. When stored, it is recommended to maintain conditions of 23 °C and 50% relative humidity within a dry and dark place.In terms of compliance and environmental standards, these markers pass the wipe resistance test according to DIN EN 61010-1 (VDE 0411-1) and achieve a flammability rating of V2 as per UL 94. Additionally, they are RoHS compliant, indicating they are free from hazardous substances. The materials used are PA, ensuring durability and reliability in various applications.The snap-in markers also meet stringent fire protection standards for rail vehicles as specified in DIN EN 45545-2, with ratings HL 1 - HL 2 for different categories. With a weight of 10.42 g per piece, these markers offer an effective solution for labeling needs across industrial settings.

The feed-through header, designated as DFK-PC 5/10-GF-7,62, is designed for reliable electrical connections with a nominal cross section of 6 mm² and a rated current of 41 A. The device is suitable for operation at a rated voltage of 630 V (III/2) and offers a linear pin layout with a pitch of 7.62 mm. Constructed with a green housing, the header incorporates male connectors and features 10 positions across 1 row, ensuring versatility in applications. Each potential is equipped with three solder pins of length 4.9 mm, facilitating wave soldering mounting methods. The locking mechanism utilizes screw locking for secure connections. Additionally, the contact surface is hot-dip tin-plated, enhancing conductivity and corrosion resistance. The product complies with several standards, including WEEE and RoHS, ensuring it meets environmental regulations. The header is packaged in cardboard for ease of transport.

The M23 Coupler connector (Designation Code: CA-07P1N129008) is designed for robust connectivity in various applications. This connector supports a cable diameter range of 10 mm to 14.5 mm and accommodates up to 7 positions with a standard direction of rotation. It utilizes a solder connection method, ensuring a reliable interface for pin-type contacts. Constructed with a shielded design, this connector offers enhanced protection against electromagnetic interference, making it suitable for demanding environments. The materials used include a copper zinc alloy (CuZn) for the turned parts and zinc (GD-Zn) for die-cast components, ensuring durability. It has a degree of protection IP67, which allows it to withstand dust and immersion in water. Operating within a temperature range of -40 °C to 125 °C, the connector maintains performance across various conditions. Additionally, it complies with RoHS II without Exemption 6c, indicating lead content below 0.1%. With a rated voltage of 48 V AC and a rated current of 20 A for the contact group, this connector is suitable for signal applications.