Phoenix Contact Części zamienne do automatyki przemysłowej

The FL SWITCH SF 14TX/2FX is designed for reliable network connectivity in industrial environments. It includes 14 twisted pair RJ45 ports and 2 fiber optic ports, enabling full duplex transmission at 100 Mbps. The device automatically detects data transmission speeds of either 10 or 100 Mbps, facilitating seamless integration into existing networks.Constructed with an aluminum housing, this switch is suitable for DIN rail mounting and features screw connections. The device supports a maximum transmission length of 6400 meters when utilizing multi-mode fiberglass with a wavelength of 1300 nm. It operates efficiently under a wide temperature range of 0 °C to 55 °C and withstands storage temperatures from -20 °C to 70 °C.With a protection class of III according to IEC 61140, it is built to endure harsh conditions, including vibration up to 5g at 150 Hz. The switch's electromagnetic compatibility complies with the EMC Directive 2004/108/EC, ensuring reliable operation in various environments. Diagnostic indicators include LEDs for data receive and link status, while redundant voltage supply is indicated by US1 and US2 LEDs.Power is supplied via a COMBICON connection, supporting a voltage range from 18.5 V DC to 30.2 V DC, with a typical current consumption of 246 mA at 24 V DC. This unmanaged switch adheres to IEEE 802.3 standards and employs a store and forward switching mode, making it an essential component for robust industrial networking.

The MACX MCR-SL-NAM-R serves as a NAMUR signal conditioner, designed specifically for the operation of proximity sensors and switches. It transmits signals to the control level through a relay output featuring a changeover contact.Equipped with comprehensive line fault detection (LFD) and 3-way electrical isolation, this device adheres to Safety Integrity Level (SIL) 2 standards. To ensure reliable operation, it includes a screw connection method for easy integration into systems.Operating within a supply voltage range of 19.2 V DC to 30 V DC, it has a maximum current consumption of 21 mA at 24 V DC. The device supports NAMUR proximity sensors according to IEC/EN 60947-5-6, with a switching threshold of less than 1.2 mA for the '0' signal and greater than 2.1 mA for the '1' signal. The relay contact can handle a maximum switching voltage of 250 V AC with a power rating of up to 500 VA.The housing, made from flame-retardant PA 6.6-FR, has a degree of protection rated at IP20. It operates effectively in ambient temperatures ranging from -40 °C to 42 °C and is suitable for mounting on a DIN rail according to EN 60715.This isolation amplifier is further characterized by its compact dimensions, measuring 12.5 mm in width, 112.5 mm in height, and 113.7 mm in depth, making it an optimal choice for space-constrained installations.

This plug is designed for nominal voltages up to 500 V and supports a maximum current of 24 A. It incorporates a spring-cage connection method, which simplifies wiring and ensures secure connections. The rated cross section is 2.5 mm², while it accommodates conductor cross sections ranging from 0.08 mm² to 4 mm². The plug is manufactured in blue (RAL 5015) and conforms to the IEC 61984 standard, allowing for connection and disconnection without load or voltage under intended use.The dimensions of the plug include a width of 5.2 mm, height of 20 mm, and depth of 39 mm. It features a degree of pollution rating of 3 and operates within an ambient temperature range of -60 °C to 70 °C. Additionally, the plug meets various fire protection requirements for rail vehicles as specified in DIN EN 45545-2 and has a flammability rating of V0 according to UL 94.The SPB 2,5/ 1-M BU designation code indicates its specific configuration, including the internal cylindrical gauge of A3 and a maximum load current of 24 A when utilizing a 4 mm² conductor cross section. It is suitable for diverse applications, including those requiring reliable performance in harsh environmental conditions.

The MODBUS TCP/RTU Interface Converter 1E/1DB9 is designed to convert serially based Modbus RTU or ASCII protocols into Modbus TCP. It supports a variety of serial client and server devices, featuring an RJ45 port and a D-SUB 9 port for connectivity.This device operates with a supply voltage range of 10.8 V DC to 30 V DC and has a typical current consumption of 48 mA at 24 V DC, with a maximum consumption of 60 mA. The interface supports a data transmission speed of up to 230.4 Kbps and can manage up to 96 Modbus/TCP clients.It has been constructed to withstand ambient temperatures from -40 °C to 70 °C, and its compact design measures 22.5 mm in width, 99 mm in height, and 115 mm in depth. The housing is made of PA 6.6 material, ensuring durability in industrial environments. Additionally, it conforms to several international standards, including UL 61010-1 and EMC Directive 2014/30/EU.For application in industrial settings, the device is classified as EMC class A, and it is not permitted for use in potentially explosive areas in China. The long mean time between failures (MTBF) of 92.1 years indicates reliability under typical operating conditions.

The distribution block, designated as PTFIX 18X2,5-NS35 BK, is designed for vertical alignment and enables bridging with other blocks through a conductor shaft. It operates at a nominal voltage of 690 V and can handle a maximum current of 24 A. The push-in connection method accommodates conductor cross-sections ranging from 0.14 mm² to 4 mm², making it versatile for various applications. With a mounting type compatible with NS 35/7.5 and NS 35/15, the block is colored black (RAL 9005) and features a compact design with dimensions of 28.6 mm in width, 58.1 mm in height, and a depth of 30.4 mm on NS 15. It is constructed from PA insulating material, rated for temperatures from -60 °C to 110 °C, ensuring reliability in diverse environmental conditions. This block supports up to 18 connections per level, with a rated surge voltage of 8 kV. Its thermal properties include a maximum power dissipation of 0.77 W and compliance with multiple fire protection standards, making it suitable for applications in rail vehicles and other demanding environments.

The UP 4/ 4 plug is designed to operate at a nominal voltage of 800 V and a nominal current of 32 A. It supports a screw connection method for secure attachment, and features four positions for versatile applications. The plug accommodates conductor cross-sections ranging from 0.2 mm² to 6 mm², with a rated cross-section of 4 mm², making it suitable for various wiring configurations.Constructed from high-quality PA insulating material, this plug is rated for operation in temperatures as low as -60 °C and as high as 125 °C. Its dimensions are 24.8 mm in width, 21 mm in height, and 41.2 mm in depth. The color is gray (RAL 7042), ensuring easy identification in installations.With an overvoltage category of III and a pollution degree of 3, it meets IEC 61984 standards for safety. The plug also features a tightening torque specification of 0.6 to 0.8 Nm and a stripping length of 9 mm for optimal conductor preparation. It has passed rigorous fire protection tests according to DIN EN 45545-2 and NFPA 130 standards, ensuring compliance in rail vehicle applications.

The Relay Module PLC-RPT-120UC/21AU is designed for universal applications within the PLC-INTERFACE product family. It incorporates a PLC-BPT.../21 basic terminal block that utilizes a Push-in connection alongside a plug-in miniature relay featuring multi-layer gold contacts. This configuration allows secure mounting on DIN rail NS 35/7.5 and includes one changeover contact.Operating with an input voltage of 120 V AC, it supports a voltage range from 93.6 V AC to 168 V AC at 20 °C. The device operates with a typical input current of 3.5 mA and boasts a mechanical service life rated at 20 million cycles. It is equipped with a protective bridge rectifier and has a maximum switching voltage capacity of 250 V AC/DC.The module's dimensions are 6.2 mm in width, 80 mm in height, and 94 mm in depth. It operates effectively within a temperature range of -40 °C to 55 °C and features an IP20 degree of protection for the relay base. The designated code for this product is PLC-RPT-120UC/21AU, ensuring compatibility with various control systems and applications.

The RIF-2-RSC-LV-24AC/4X21 is a pre-assembled relay module designed for versatile applications. It incorporates a relay base and a power contact relay, ensuring reliable performance. The module includes a plug-in display/interference suppression component and a retaining bracket for secure installation.Operating at an input voltage of 24 V AC, this unit supports an input voltage range of 19.2 V AC to 28.8 V AC at 20 °C and is suitable for both 50 and 60 Hz mains frequencies. The contact configuration consists of 4 changeover contacts, which allow for flexible switching options.With a typical input current of 66 mA at nominal voltage and a maximum switching voltage of 250 V AC/DC, this relay module is engineered for demanding environments. The mechanical service life is approximately 20 million cycles, and the insulation rating is basic, categorized under overvoltage category II and pollution degree 2.Installation is simplified with a DIN rail mounting type, and the relay base is rated at IP20 for protection. The ambient operating temperature ranges from -40 °C to 50 °C, while storage conditions can reach up to 85 °C.

The PTFIX 6/6X2,5-G YE serves as a distribution block with a nominal voltage rating of 450 V and a nominal current capacity of 24 A. This unit employs a push-in connection method, accommodating a conductor cross-section ranging from 0.14 mm² to 4 mm² for load contacts, while the rated cross-section stands at 6 mm² with a broader range of 0.5 mm² to 10 mm² available for line contacts. Mounting is facilitated through an adhesive method, and the block is finished in yellow for visibility.Each block can be interconnected via the conductor shaft, enabling flexible configurations. It supports a total of seven connections with a single-row layout and is designed for use in environments with an overvoltage category of III and a pollution degree of 3. The rated surge voltage is 6 kV, ensuring reliable operation under various conditions.Manufactured in Poland, the device weighs approximately 20.38 g each including packaging. The unit adheres to IEC standards and is suitable for a temperature range of -35 °C to 110 °C during operation, making it versatile for diverse applications. The use of high-quality insulating materials allows for a temperature index of 130 °C, enhancing durability in demanding environments.

This relay module, designated as RIF-3-RPT-LDP-24DC/2X21, is designed for efficient control applications. It operates at an input voltage of 24 V DC and provides push-in connection capabilities for both the coil and contact sides, accommodating conductor cross sections from 0.14 mm² to 1.5 mm².The module features 2 PDT contacts, with a maximum switching voltage of 250 V AC/DC and a minimum switching voltage of 10 V at 24 mA. It can handle inrush currents up to 30 A for 20 ms and continuous currents of 10 A. The interrupting ratings vary based on the voltage, with maximum values of 240 W at 24 V DC and 2500 VA at 250 V AC.Designed to operate in ambient temperatures ranging from -40 °C to 60 °C, this module is suitable for a variety of environments. It adheres to several standards, including CSA and DIN EN 50178, ensuring reliable performance and safety. The module exhibits a mechanical lifespan of approximately 20 million cycles and is compliant with China RoHS for hazardous substances.

The coupling relay is specifically configured for SIL 3 applications, adept at interfacing digital output signals with peripheral devices. It incorporates an enabling current path and a confirmation current path, ensuring reliable operation in safety-critical environments. The product, designated as PSR-PC20-1NO-1NC-24DC-SC, supports safe state off applications and is equipped with a test pulse filter for enhanced signal integrity. This relay has a rated control supply voltage of 24 V DC and operates with a typical control current of 50 mA. Its design includes a reinforced insulation rating of 6 kV from the control circuit to the enabling current path, ensuring robust protection against electrical surges. The relay's mechanical service life is rated for 10 million cycles, indicating its suitability for prolonged industrial applications. Installation is streamlined through a TBUS connection and a plug-in screw terminal block, accommodating conductor cross-sections from 0.2 mm² to 2.5 mm². The device is housed in a yellow PA casing, designed for DIN rail mounting, and features LED indicators for operational status, voltage display, and error indication. With an operating temperature range from -40 °C to 70 °C, it is engineered for diverse environmental conditions while adhering to a degree of protection rated at IP20.

Axioline F, Digital output module, Digital outputs: 16, 24 V DC, connection technology: 3-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

This equipment marking label, designated as EMSP-AL (50X30), is constructed from aluminum and comes in a natural aluminum color. It is designed to be unlabeled initially, allowing for customization with BLUEMARK ID COLOR, BLUEMARK ID, and BLUEMARK CLED systems. The label features a lettering field measuring 50 mm in width and 30 mm in height, making it suitable for various identification needs.The label supports mounting via screws or rivets, ensuring secure installation. With dimensions of 60 mm in length and a thickness of 0.8 mm, it is designed to withstand operational conditions with an ambient temperature range of -55 °C. The product complies with DIN EN 61010-1 standards, ensuring wipe resistance for durability.Each label weighs approximately 3.936 g, and the packaging unit contains 45 pieces. It has been rigorously tested for resistance to various substances, including isopropanol, ethanol, acetone, and more, confirming its suitability for challenging environments. This product is free from silicone, halogen, and cadmium, aligning with safety and environmental standards.

The BC 161,6 OT 111112 BK is a modular upper housing part designed for incorporation into distribution boards, compliant with DIN 43880 standards. This component measures 161.6 mm in width, 89.7 mm in height, and 54.85 mm in depth, making it suitable for various applications within modular building installations.Manufactured in Germany, this housing is available in a black color (RAL 9005) and is constructed from polycarbonate (PC), offering a flammability rating of V0 according to UL 94. It supports a PCB thickness ranging from 1.4 mm to 1.8 mm and accommodates up to six connection openings. The design includes ventilation openings to enhance thermal management.With an operational temperature range of -40 °C to 105 °C and a storage temperature range of -40 °C to 70 °C, this upper housing part is engineered to withstand various environmental conditions. It also features a maximum IP code of IP20, ensuring adequate protection against solid objects larger than 12.5 mm.

Panel feed-through, QUICKON connection, number of positions: 4+PE, 1 mm² ... 2.5 mm², 690 V, 15 A, black, with QUICKON nut, external cable diameter: 6 mm ... 11 mm, assembly thread: M20, Spade connection (For slip-on sleeves according to DIN 46247-2)

The UCT-WMCO 3,5 (12X4) YE conductor marking sheet is designed for effective wire identification. This product features a yellow base and allows for labeling with various technologies including TOPMARK NEO, TOPMARK LASER, and THERMOMARK CARD, among others. It supports a cable diameter range of 2.9 mm to 3.5 mm and provides a lettering field of 12 x 4 mm.In terms of durability, it complies with DIN EN 61010-1 for wipe resistance and possesses a flammability rating of V0 according to UL 94. The product is suitable for operation in ambient temperatures from -40 °C to 120 °C, with recommended storage conditions at 23 °C with 50% relative humidity. Proper storage in a dry, dark environment within its original packaging is advised.Each package contains 32 individual labels, organized in rows of 8, weighing approximately 13.11 g each. The base element is made of PC and is free from silicone, halogen, and cadmium, ensuring compliance with the EN 45545-2 fire protection standards for rail vehicles. Additionally, the product has passed various tests for paint wetting impairment substances as per LABS-conformity.

This socket is equipped with a pin connector pattern type L and utilizes a push-in spring connection, making it suitable for various applications in Italy and other countries. It includes an extended touch-proof feature along with a shutter, enhancing safety during operation. The device is designed for mounting on a DIN rail in service interfaces or for direct installation. Operating effectively within a temperature range of -20 °C to 60 °C, this socket is compliant with the CEI 23-50 standard, ensuring reliability in diverse environmental conditions. With dimensions of 45 mm in width, 75 mm in height, and 57.5 mm in depth, it accommodates conductor cross sections from a minimum of 0.2 mm² to a maximum of 4 mm² for solid conductors, and from 0.2 mm² to 2.5 mm² for flexible conductors. The connection method supports conductor sizes ranging from AWG 24 to AWG 12. Environmental compliance is ensured as the product meets China RoHS regulations, indicating no hazardous substances above threshold values and an unlimited environmentally friendly use period. The flammability rating according to UL 94 is V0, signifying its suitability for various applications.

The PLC-BSC-230UC/21 is a compact 6.2 mm PLC basic terminal block crafted for screw connection, specifically designed for DIN rail NS 35/7.5 mounting. This unit does not include a relay or solid-state relay and offers a single changeover contact with a nominal input voltage of 230 V AC/DC.Manufactured in Germany, this component is part of the PLC-INTERFACE product family and supports universal applications with a 100% operating factor. The terminal block features a protective circuit consisting of a bridge rectifier, ensuring reliability under various conditions.In terms of technical specifications, it operates within an ambient temperature range of -40 °C to 55 °C, and can be stored and transported within -40 °C to 85 °C. The device meets the requirements of overvoltage category II and pollution degree 3, complying with standards such as IEC 60664. The enclosure must be installed with adequate protection as per the relevant rules.Conductor connections can accommodate rigid and flexible conductors ranging from 0.14 mm² to 2.5 mm², with an AWG compatibility of 26 to 14. The screw thread is M3, and a tightening torque of 0.6 Nm to 0.8 Nm is recommended. An LED status display is integrated for operational visibility.

The Plug-in Card Block SKBD 16/MT is designed for 19" applications, featuring a total of 16 positions. It is characterized by a green color and is constructed with a tin contact surface, ensuring reliable connectivity. The pitch of this block is set at 5 mm, accommodating various plug-in card configurations. Packaged in cardboard, this product is manufactured in Poland, aligning with the SKBD product range.

The PTFIX 6X2,5-G BN serves as a distribution block that can be interconnected using the conductor shaft, facilitating enhanced connectivity through compatible plug-in bridges available in accessories. Designed for efficient electrical distribution, this block operates at a nominal voltage of 450 V and carries a maximum load current of 32 A with a nominal current rating of 24 A.Constructed with an adhesive mounting type, it features a cross-section range of 0.14 mm² to 4 mm², accommodating various conductor sizes. The device supports a single row configuration with six connections, making it suitable for compact installations.With a width of 16 mm, height of 28.6 mm, and depth of 22.7 mm, this block is designed to fit within standard housing. The brown color (RAL 8028) and PA insulating material ensure durability and compliance with fire safety standards, including DIN EN 45545-2. It is rated for overvoltage category III and operates effectively within a temperature range of -35 °C to 110 °C.