Phoenix Contact Części zamienne do automatyki przemysłowej

The feed-through header, designated as DFK-MSTBA 2,5/ 2-G-5,08, is engineered with a nominal cross section of 2.5 mm² and a green color. It is rated for a nominal current of 12 A and a rated voltage of 320 V (III/2). The contact surface is tin-plated, and it utilizes male connectors with two potentials across a single row and two positions. Designed for wave soldering, this component has a pin layout featuring linear pinning with a pitch of 5.08 mm. It includes two connections with one solder pin per potential, ensuring efficient connectivity. The product range is identified as DFK-MSTBA 2,5/..-G, and it adheres to standard pin connector pattern alignment, with no locking mechanism required. Notable specifications include a contact resistance of 1.4 mΩ, and it is compliant with WEEE/RoHS regulations. The insulating material is PBT, rated with a flammability of V0 according to UL 94. The dimensions of the header are as follows: width of 29.76 mm, height of 20.07 mm, and length of 12 mm, with a solder pin length of 3.23 mm.

The PP-H 6/1-L plug is designed for self-assembly applications, supporting a nominal voltage of 1000 V and a maximum load current of 41 A. This component utilizes a push-in connection method for ease of use. It has a rated cross section of 6 mm², while accommodating a range of conductor cross sections from 0.5 mm² to 10 mm², making it versatile for various wiring needs.With dimensions of 8.2 mm in width, 21 mm in height, and 49.3 mm in depth, this plug is compact and efficient. The gray color (RAL 7042) provides good visibility in industrial environments. It is compliant with IEC 61984 standards and is suitable for use in the railway industry.The ambient temperature range for operation extends from -60 °C to 70 °C, ensuring functionality in extreme conditions. Additionally, this plug exhibits a flammability rating of V0 according to UL 94, meets fire protection standards for rail vehicles, and has passed various safety tests including smoke gas toxicity and surface flammability tests.PP-H 6/ 1-L

Consisting of a 1 A measuring transducer and a Rogowski coil with a 3 m signal line, this product, designated as PACT RCP-4000A-1A-D190, provides precise measurements of AC current in power applications. The Rogowski coil features a length of 600 mm and a diameter of 190 mm, enabling effective current sensing capabilities. Manufactured in Germany, this device is characterized by reinforced insulation compliant with IEC 61010-1 and is rated for overvoltage category III at 1000 V. Its accuracy is quantified with a typical measuring error of less than 1 % and a maximum transmission error of ≤ 0.5 %, ensuring reliable performance in various conditions. Designed for a wide frequency range of 45 Hz to 65 Hz, the current transformer can accurately detect harmonics below 2 kHz. The nominal supply voltage operates between 19.2 V DC and 30 V DC, with a maximum current consumption of 190 mA. The output signal is calibrated to provide 100 mV at 1000 A input under no-load conditions. With a robust construction, the Rogowski coil is protected to IP54, while the measuring transducer adheres to IP20. The operating temperature range for the measuring coil extends from -30 °C to 80 °C, and for the transducer, from -20 °C to 70 °C, making it suitable for diverse environmental conditions.

The PTFIX 12X1,5-G PK distribution block is designed for efficient interconnection of multiple blocks through its conductor shaft, enabling effective bridging with compatible plug-in accessories. It operates at a nominal voltage of 450 V and handles a nominal current of 17.5 A. The push-in connection method accommodates conductor cross sections ranging from 0.14 mm² to 2.5 mm². Constructed with a pink insulating material (PA) that complies with various fire protection standards, this block is suitable for a wide range of applications, including those requiring overvoltage category III and pollution degree 3 ratings. It features a compact design with dimensions of 24.9 mm in width, 21.6 mm in height, and 18.7 mm in depth, making it ideal for various installations. With a maximum load current of 22 A and a total current of 26 A, this block is capable of efficient energy distribution. It operates effectively across a temperature range of -35 °C to 110 °C and maintains performance under a relative humidity of 20% to 90%. The distribution block is also suitable for environments adhering to IEC 60998-2-2 standards.

PCB connector, nominal cross section: 6 mm², color: green, nominal current: 41 A, rated voltage (III/2): 1000 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: PC 5/..-STCL1, pitch: 7.62 mm, connection method: Screw connection with tension sleeve, screw head form: Z1L Slotted Pozidriv, conductor/PCB connection direction: 0 °, locking clip: - without locking clip, plug-in system: COMBICON PC 5, locking: Clip locking, mounting: Click & Lock latching slide, type of packaging: packed in cardboard

The PP-H 1,5/S/1-M BU plug is designed for applications requiring a nominal voltage of 500 V and a nominal current of 17.5 A. This component employs a push-in connection method, ensuring reliable connectivity. Its rated cross section is 1.5 mm², accommodating conductors with a cross section ranging from 0.14 mm² to 1.5 mm² and is available in blue. Manufactured in Poland, this plug is compliant with IEC 61984 standards, allowing for connection and disconnection under load or voltage in intended applications. It is particularly suited for the railway industry, featuring a single position and a compact pitch of 3.5 mm. The component has a maximum power dissipation of 0.56 W and supports an overvoltage category of III, with a rated surge voltage of 6 kV. Durability is ensured with a flammability rating of V0 according to UL 94, and it can operate in ambient temperatures as low as -60 °C and as high as 70 °C. The connector is designed to withstand a degree of pollution rated at 3, making it suitable for various environmental conditions.

The DFK-PC 4/ 7-G-7,62-FS4,8 feed-through header is designed for direct mounting and features a nominal cross section of 4 mm². It is constructed with a green housing and supports a nominal current of 15 A, alongside a rated voltage of 400 V. The device includes 7 potentials arranged in a single row, with each potential featuring one solder pin.This header employs a spade connection method, ensuring reliable connectivity. It is compatible with the COMBICON PC 4 plug-in system and follows standard pin connector pattern alignment. The packaging is designed to accommodate multiple units, specifically packed in cardboard for secure transit.The product is compliant with WEEE/RoHS standards and is manufactured to prevent whisker formation according to IEC 60068-2-82 and JEDEC JESD 201. Its components include a tin-plated copper alloy contact surface, providing enhanced conductivity while maintaining durability. The overall design adheres to the specifications outlined in IEC 60664-1:2007-04, ensuring safety and performance in various operational conditions.

The SACC-CI-M12FSX-8P SMD SH T is a flush-type connector specifically engineered for Ethernet connectivity. It includes an 8-position socket with a straight head design and utilizes M12 threading for reliable PCB mounting. The component is compliant with RoHS II regulations without Exemption 6c, ensuring minimal lead content (Constructed in Germany, this connector provides robust performance with a rated surge voltage of 1.5 kV and is shielded to prevent signal interference. The contact resistance is maintained at ≤ 3 mΩ, while insulation resistance exceeds 100 MΩ, ensuring high-quality data transmission. It is rated for a nominal voltage of 50 V AC and nominal current of 0.5 A for data transmission, operating within the CAT6A transmission characteristics.With an operational temperature range from -25 °C to 105 °C, the connector is suitable for various environments. It features a degree of protection rated at IP67 when correctly plugged in and locked, offering resistance to dust and water ingress. The connector has a maximum insertion/withdrawal cycle rating of over 100, ensuring durability in regular use. For ease of installation, it comes with an assembly pad and is packaged in trays, with a minimum order quantity of 60 pieces.

Data connector, Ethernet/PROFINET CAT5 (100 Mbps), 4-position, shielded, Plug straight M12, D-coded, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm

The PTFIX 10/12X4-NS35 GY distribution block operates at a nominal voltage of 800 V and supports a nominal current of 32 A. It utilizes push-in connections for both load and line contacts, accommodating a cross-section range from 0.2 mm² to 6 mm², with a rated cross-section of 10 mm². Designed for NS 35/7.5 and NS 35/15 mounting types, this block features a gray color finish. It includes 13 connections organized in a single row, ensuring efficient electrical distribution. The device adheres to IEC 60947-7-1 standards and is suitable for overvoltage category III applications, with a rated surge voltage of 6 kV. Manufactured in Poland, the distribution block also provides flexibility in conductor sizes, accommodating rigid conductors from 1.5 mm² to 10 mm² and flexible conductors from 0.5 mm² to 10 mm². It supports a maximum total current of 63 A while maintaining a maximum load current of 57 A, depending on the conductor cross-section used. In terms of environmental resilience, the PTFIX 10/12X4-NS35 GY distribution block operates effectively within a temperature range of -60 °C to 110 °C, making it suitable for various industrial settings. The product also meets rigorous fire protection standards for rail vehicles and has passed various flammability tests.

The A/F 20 METER is a transparent flat-ribbon cover engineered for terminal strip applications. With dimensions of 2 mm in thickness and 20 mm in width, it effectively safeguards terminal connections. For installation, it necessitates the inclusion of 2 E/UK end brackets and 2 adjustable VAH cover holders.This cover is constructed from polycarbonate, providing a flammability rating of V2 in accordance with UL 94 standards. With a maximum supply length of 100 cm, the component is suitable for diverse electrical setups. Originating from Germany, it has a weight of 60 g per piece, ensuring a lightweight yet durable solution for terminal protection.

The Relay Module, designated as PLC-RSC- 24DC/21, integrates a basic terminal block and a miniature relay suitable for installation on a DIN rail (NS 35/7.5). This module is characterized by a single changeover contact and operates at a nominal input voltage of 24 V DC, with an input voltage range from 18.5 V DC to 33.6 V DC at 20 °C.Constructed for versatility, the module supports a mechanical service life of up to 20 million cycles, ensuring durability in various applications. It possesses a maximum power dissipation of 0.22 W under nominal conditions and is designed with protective features such as reverse polarity protection and a polarity protection diode.In terms of electrical specifications, it features a typical input current of 9 mA at nominal voltage and operates with a response time of approximately 5 ms and a release time of 8 ms. The relay contacts are made of AgSnO material, with a maximum switching voltage of 250 V AC/DC, and a minimum switching voltage of 5 V (100 mA). The module can handle a limiting continuous current of 6 A and a maximum inrush current of 10 A for up to 4 seconds.For installation, the Relay Module requires a screw connection, accommodating conductor cross-sections from 0.14 mm² to 2.5 mm², and features a stripping length of 8 mm. The compact dimensions of 6.2 mm in width, 80 mm in height, and 94 mm in depth make it suitable for various control applications.

The Contact Insert Set VC-TR2/3M-PEA-S666-SET is specifically designed for the VARIOCON product family, incorporating a total of 18 contact positions. This insert utilizes a housing made from polyamide (PA), ensuring durability under various conditions.With a rated voltage of 250 V and a maximum rated current of 10 A, this socket-type contact insert is suitable for a wide range of applications. It supports a connection profile of 17+PE and has a rated surge voltage of 4 kV, making it reliable for environments that require robust electrical connections.Constructed from materials that include tin-plated copper-zinc contacts and stainless steel for screw connections, this product meets stringent safety and performance standards. The design also allows for operational temperatures ranging from -40 °C to 100 °C, accommodating diverse operational settings.Notably, the insert is compliant with UL 94 V0 flammability ratings, providing additional assurance of safety. The assembly features a specific tightening torque range of 0.22 to 0.25 Nm and is designed for a minimum of 100 insertion/withdrawal cycles, ensuring reliability over time. The designation code for this product is VC-TR2/3M-PEA-S666-SET.

The PTRVB 4-FI /GY is a potential distributor designed to handle a variety of conductor sizes, specifically accommodating conductors ranging from 0.14 mm² to 6 mm². It supports a nominal voltage of 250 V and a nominal current of 17.5 A, making it suitable for various electrical installations. Featuring a push-in connection method, this distributor is ideal for quick and reliable electrical connections. It has a rated cross-section of 1.5 mm² with a maximum capacity of 4 mm² at the feed-in stage. The mounting options include NS 35/7.5 and NS 35/15, ensuring compatibility with standard DIN rails. The device is constructed from gray PA insulating material, with a flammability rating according to UL 94 classified as V0. Its operational temperature range extends from -60 °C to 105 °C, accommodating a variety of environments. With a short-time withstand current of 0.72 kA at 6 mm², it ensures robust performance under demanding conditions. Additional specifications include a maximum load current of 37 A and compliance with IEC 60947-7-1 standards. The product's design incorporates features for fire protection in rail vehicles, meeting the requirements set forth in DIN EN 45545-2.

The UP 4/ 1-M plug is engineered to operate at a nominal voltage of 800 V and a maximum load current of 32 A when utilizing a conductor cross-section of 6 mm². This device accommodates a rated cross-section of 4 mm² and supports a variety of wire sizes ranging from 0.2 mm² to 6 mm². Its screw connection method ensures reliable connectivity.Constructed from polyamide (PA), this plug exhibits a high flammability rating of V0 according to UL 94. The unit is designed for durability in extreme temperatures, functioning effectively at -60 °C and withstanding ambient temperatures up to 70 °C during assembly and operation. Additionally, it meets fire protection standards for rail vehicles (DIN EN 45545-2) across various categories.The plug’s dimensions measure 21 mm in height, 21 mm in length, and 6.2 mm in width, with a weight of 4.612 g when unpackaged. It is suitable for applications requiring compliance with IEC 61984 standards, allowing for connection and disconnection under load or voltage within intended parameters.

The relay module EMG 45-RELS/IR1-G 24 is designed for industrial applications, accommodating a plug-in base for relays of size 1. It comprises four changeover contacts and operates within an input voltage range of 24-48 V DC. The module is equipped with an LED display and incorporates both freewheeling and polarity protection diodes to enhance reliability.Manufactured in Germany, this module is suitable for mounting on DIN rails, allowing for versatile installation in various environments. It operates effectively at ambient temperatures from -20 °C to 50 °C, ensuring functionality under a range of conditions. The dimensions of the module are 45 mm in width, 75 mm in height, and 82.5 mm in depth, and it features a green color (RAL 6021).For optimal performance, inductive loads connected to the relay should be dampened with an appropriate protection circuit to safeguard the relay coils and contacts. It is essential to adhere to the specified connection methods, which include screw connections with a stripping length of 8 mm and support for conductor cross-sections from 0.2 mm² to 4 mm² for rigid conductors and 0.2 mm² to 2.5 mm² for flexible conductors.

The Router 2989310 is equipped with an intelligent firewall, providing a data throughput of up to 99 Mbps and is designed in the ME45 format. The device features a stateful inspection firewall, ensuring enhanced security and simplified configuration. In terms of performance, it supports a maximum VPN throughput of 85 Mbps in router mode and 58 Mbps in stealth mode. This router includes robust security functions such as support for DHCP, NTP client functionality, and remote Syslog logging to an external server. It also employs various encryption methods including DES, 3DES, and AES-128, -192, -256. The firewall capabilities allow for configurable stateful inspection, filtering based on MAC and IP addresses, ports, and protocols, while also providing protection against IP spoofing and denial-of-service attacks. Dimensionally, the router measures 45 mm in width, 99 mm in height, and 112 mm in depth, and operates within an ambient temperature range of 0 °C to 55 °C with a permissible humidity of 10 % to 95 % (non-condensing). It requires a supply voltage of 24 V DC with a current consumption of 170 mA, and features two Ethernet ports with transmission speeds of 10/100 Mbps.

The HC-B 10-TMB-100/O1STM32S-EUA is a sleeve housing tailored for demanding environmental conditions. Constructed from die-cast aluminum and finished with a powder-coated black surface, this housing is resistant to salt water and is designed to accommodate contact inserts such as HC-B10, BB18, DD42, M, and K8/24. Measuring 100 mm in height and 57 mm in width, it features a single lateral cable outlet with a screw connection of M32 type. The assembly cutout dimensions are 35 mm in width and 65 mm in length, ensuring compatibility with various installations. Its robust design includes a locking latch made of high-grade steel and a handle composed of PA-GF, contributing to its durability. With an operational temperature range of -40 °C to 125 °C and a degree of protection rated at IP65, this housing is suitable for a variety of industrial applications. Proper assembly is crucial to maintain the integrity of the protective conductor contact, which necessitates that the panel-mount flanges maintain adequate electrical contact with the mounting panel.

The IB IL DALI/PWR-PAC serves as an inline DALI master equipped with an integrated DALI power supply unit. It ensures safe electrical isolation and operates with a local bus transmission speed of 500 kbps. Designed for industrial applications, it features a degree of protection rated at IP20, making it suitable for control cabinet installations.This module supports a supply voltage range of 19.2 V DC to 30 V DC and can connect up to three local bus devices, utilizing DALI extension terminals. Its current carrying capacity reaches a maximum of 128 mA, with a short-circuit output current limit set at 250 mA. The module also incorporates spring-cage connections for reliable wiring.With a compact design measuring 48.8 mm in width, 119.8 mm in height, and 71.5 mm in depth, this module is lightweight, weighing 286 g without packaging. It operates effectively within an ambient temperature range of -25 °C to 60 °C and can withstand air pressures from 80 kPa to 106 kPa at elevations up to 2000 m.The product is characterized by its modular design, with a maximum power dissipation of 10.6 W and a process data channel of 32 bits. Additional features include a required parameter data size of 1 Byte and a configuration data requirement of 5 Bytes.

The Coupler connector CA-12M2N8A9503 features an M23 thread type and a straight design, suitable for applications requiring a shielded connection. With a total of 12 positions and a pin contact type, this connector allows for reliable feedback and signal transmission. The crimp connection method accommodates a cable diameter range of 6 mm to 10 mm. Constructed from durable materials, including a housing made of copper zinc alloy and die-cast zinc, this connector is rated for a maximum current of 8 A and a voltage of 48 V AC. The rated surge voltage is 1.5 kV, ensuring robust performance in demanding environments. Compliance with RoHS II without Exemption 6c (Pb For optimal use, crimp contacts with a diameter of 1 mm must be ordered separately. This product is identified by the designation code CA-12M2N8A9503, facilitating accurate specification in procurement.