Phoenix Contact Części zamienne do automatyki przemysłowej

The TC EXTENDER 6004 ETH-2S is a managed Ethernet extender designed for industrial applications, facilitating point-to-point, line, and ring structures. It achieves data transmission rates of up to…

The MODBUS TCP/RTU Interface Converter 1E/1DB9 is designed to convert serially based Modbus RTU or ASCII protocols into Modbus TCP. It supports a variety of serial client and server devices…

The FL SWITCH SF 14TX/2FX is designed for reliable network connectivity in industrial environments. It includes 14 twisted pair RJ45 ports and 2 fiber optic ports, enabling full duplex transmission…

The MACX MCR-SL-NAM-R serves as a NAMUR signal conditioner, designed specifically for the operation of proximity sensors and switches. It transmits signals to the control level through a relay output…

The FL SWITCH SFN 6TX/2FX-NF is an unmanaged Ethernet switch designed to facilitate reliable communication in industrial environments. It offers six twisted pair RJ45 ports and two fiber optic ports…

The Single Relay REL-IR4/L- 24AC/4X21AU is designed for industrial applications requiring reliable switching. This relay features four changeover contacts and is constructed with hard gold plating to…

The Analog output module AXL P AO4 HART 1F features four HART-compatible outputs, allowing for precise current signaling in the ranges of 0 mA to 20 mA and 4 mA to 20 mA . It employs 2-conductor…

The PSI-MODEM-SHDSL/PB serves as an industrial extender for PROFIBUS applications, facilitating point-to-point communication and enabling linear configurations. It is compatible with repeaters and…

Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, -10 V ... 10 V, connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20…

The hybrid motor starter ELR H3-IES-PT- 24DC/500AC-0,6 is capable of initiating three-phase AC motors operating at voltages up to 500 V AC with an output current of 0.6 A. It operates with a control…

The Relay Module PLC-RSC-12DC/21HC/EX is structured for DIN-rail mounting and includes a basic terminal block with a width of 14 mm, utilizing a screw connection. It operates with a nominal input…

This plug, designated as SPV 2,5/13, supports a nominal voltage of 500 V and a maximum load current of 24 A when using a 4 mm² conductor cross-section. With 13 positions, it employs a spring-cage…

The COMBI receptacle, designated as SC 4/11, operates at a nominal voltage of 800 V and supports a nominal current of 32 A. It employs a spring-cage connection method, accommodating conductor cross…

This plug is designed for nominal voltages up to 500 V and supports a maximum current of 24 A . It incorporates a spring-cage connection method, which simplifies wiring and ensures secure…

The PP-H 1,5/S/9 plug is designed for applications requiring reliable electrical connections. It operates at a nominal voltage of 500 V and handles a maximum current of 17.5 A. The connection method…

The distribution block, designated as PTFIX 18X2,5-NS35 BK , is designed for vertical alignment and enables bridging with other blocks through a conductor shaft. It operates at a nominal voltage of…

The PTFIX 6/6X2,5-NS35 WH distribution block is designed for efficient bridging via the conductor shaft, allowing integration with corresponding plug-in bridges available as accessories. With a…

Safe coupling relay for SIL 3 high and low demand applications, connects digital output signals to the I/O, 2 enabling current paths, 1 signal contact, module for safe state off applications…

PCB headers, nominal cross section: 2.5 mm², color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 2…

The ELR W3- hybrid motor starter is a comprehensive solution for industrial applications. This 4 in 1 contactor offers three-phase operation, providing flexibility and adaptability to various…