Phoenix Contact Części zamienne do automatyki przemysłowej

The DFK-PC 5/12-STF-SH-7,62 is a feed-through connector designed for reliable electrical connections. It supports a nominal cross section of 6 mm² and can handle a nominal current of 41 A at a rated…

The PTS 1,5/ 6-PH-5,0 is a printed circuit board connector designed for efficient connectivity in various applications. It accommodates a nominal current of 10 A, with a rated voltage of 400 V…

The FMC 1,5/12-ST-3,5 is designed as a printed-circuit board connector with a nominal cross section of 1.5 mm² and a striking green color. It accommodates a nominal current of 8 A and operates at a…

The PLC-RPT-60DC/21HC relay module is engineered for high continuous current applications, integrating a PLC-BPT.../21 HC terminal block with a push-in connection and a plug-in miniature relay. It is…

The surge protection device TTC-6-1X2-F-M-24DC-PT-I is engineered for use with a 2-wire floating signal circuit, effectively safeguarding against overvoltage conditions. It supports a current loop…

The ELR H3-IES-PT/500AC-3-IOL is a hybrid motor starter intended for 3-phase AC motors, capable of operating at voltages up to 500 V AC and output currents of 3 A. This device includes a range of…

The distribution block, designated as PTFIX 6/6X2,5 PK , is designed for seamless bridging with other blocks using a conductor shaft, enhancing connectivity options. It operates with a nominal…

The PTFIX 10/6X4-NS35A OG is a distribution block designed for reliable electrical connections. It supports a nominal voltage of 800 V and a nominal current of 57 A, utilizing push-in connection…

The AXL F DI16 NAM XC 1F is a digital input module designed for extreme conditions, offering 16 NAMUR-compatible inputs with a nominal input voltage of 8.2 V DC. This module utilizes a 2-conductor…

The termination resistor, designated as FL LCX 50-OHM-RSMA , is specifically designed to be screwed onto an unused antenna connection in WLAN devices, particularly useful in leaky wave applications…

The 0.5 mm² PCB connector is designed for reliable connections in electronic applications. It supports a nominal current of 6 A and a rated voltage of 160 V (III/2) . This connector features a gold…

The FRONT-MC 1,5/19-STF-3,81 is designed for PCB applications with a nominal cross section of 1.5 mm² and supports a maximum current of 8 A. The connector is colored green and features a tin contact…

The device marker, designated as LS-EMSP-AL (75,6X54), is constructed from aluminum and is presented in an aluminum color. It is an unlabeled marker that can be customized using TOPMARK NEO or…

The ME MAX 90 G U-U1 KMGY is a DIN rail housing designed for modular applications. It measures 90.4 mm in width, 99 mm in height, and 113.65 mm in depth. The housing is fabricated from PA material…

The Relay Module PLC-RSC- 60DC/21-21AU is part of the PLC-INTERFACE family, designed for universal applications with a 100% operating factor. It includes a PLC-BSC.../21 terminal block with screw…

The PSR-MC30-2NO-1DO-24DC-SC is a safety relay that facilitates emergency stop functions and safety door controls, adhering to SIL 3 standards, Cat. 4, and performance level e. It operates with 1 or…

Safety relay module for sensor-free zero-speed monitoring for 3- and 1-phase motors up to SIL 3, Cat. 3, PL e, 2-channel evaluation of the residual voltage of AC, three-phase, and DC motors, plug-in…

The 12X2,5-NS35 BN distribution block is designed for vertical alignment and facilitates bridging between multiple blocks using a conductor shaft. Its nominal voltage reaches up to 690 V, with a…

The QC 0,5/13-STF-3,81 is a printed circuit board connector characterized by its green housing and a nominal current rating of 6 A . It operates at a rated voltage of 200 V under category III/2…

The device connector is designed for rear mounting and features a 4-position flush-type male connector adhering to M12 standards. The cable length is 0.5 m, utilizing individual wires with a…