Phoenix Contact Części zamienne do automatyki przemysłowej

The AXL F DI16 NAM XC 1F is a digital input module designed for extreme conditions, offering 16 NAMUR-compatible inputs with a nominal input voltage of 8.2 V DC. This module utilizes a 2-conductor…

The termination resistor, designated as FL LCX 50-OHM-RSMA , is specifically designed to be screwed onto an unused antenna connection in WLAN devices, particularly useful in leaky wave applications…

The 0.5 mm² PCB connector is designed for reliable connections in electronic applications. It supports a nominal current of 6 A and a rated voltage of 160 V (III/2) . This connector features a gold…

The FRONT-MC 1,5/19-STF-3,81 is designed for PCB applications with a nominal cross section of 1.5 mm² and supports a maximum current of 8 A. The connector is colored green and features a tin contact…

The device marker, designated as LS-EMSP-AL (75,6X54), is constructed from aluminum and is presented in an aluminum color. It is an unlabeled marker that can be customized using TOPMARK NEO or…

The ME MAX 90 G U-U1 KMGY is a DIN rail housing designed for modular applications. It measures 90.4 mm in width, 99 mm in height, and 113.65 mm in depth. The housing is fabricated from PA material…

The Relay Module PLC-RSC- 60DC/21-21AU is part of the PLC-INTERFACE family, designed for universal applications with a 100% operating factor. It includes a PLC-BSC.../21 terminal block with screw…

The PSR-MC30-2NO-1DO-24DC-SC is a safety relay that facilitates emergency stop functions and safety door controls, adhering to SIL 3 standards, Cat. 4, and performance level e. It operates with 1 or…

Safety relay module for sensor-free zero-speed monitoring for 3- and 1-phase motors up to SIL 3, Cat. 3, PL e, 2-channel evaluation of the residual voltage of AC, three-phase, and DC motors, plug-in…

The 12X2,5-NS35 BN distribution block is designed for vertical alignment and facilitates bridging between multiple blocks using a conductor shaft. Its nominal voltage reaches up to 690 V, with a…

The QC 0,5/13-STF-3,81 is a printed circuit board connector characterized by its green housing and a nominal current rating of 6 A . It operates at a rated voltage of 200 V under category III/2…

The device connector is designed for rear mounting and features a 4-position flush-type male connector adhering to M12 standards. The cable length is 0.5 m, utilizing individual wires with a…

The String combiner box SCB SOL-SC-2ST-0-DC-2MPPT-1101 is engineered for integration into photovoltaic systems, supporting a maximum of 1,000 V DC. This unit allows for the connection of two strings…

This contact insert is part of the VARIOCON range and is constructed from polyamide with a light grey finish. It accommodates up to 6 positions and is rated for a maximum voltage of 250V and a…

Safety relay for emergency stop, safety door, and light grid monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, single or two-channel operation, 3 enabling current paths, nominal…

Axioline F, Digital I/O module, Digital inputs: 16, 24 V DC, connection technology: 1-conductor, Digital outputs: 16, 24 V DC, 500 mA, connection technology: 1-conductor, transmission speed in the…

The Marshalling Patchboard PTMC 1,5/48-2 is designed for efficient electrical distribution, with labels ranging from 1 to 48. It has a nominal voltage of 500 V and a nominal current capacity of 17.5…

Assembled shielded round cable; connection 1: Single wires (25-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB…

PLC-INTERFACE for railway applications, consisting of basic terminal block with push-in connection and integrated miniature solid-state relay, range: 0.7 x UN to 1.25 x UN, temperature range: -25°C…

The AXC F 3152 Controller from Phoenix Contact is a high-performance, modular PLCnext Control designed for the Axioline I/O system. Engineered for maximum performance and ease of use, it operates…