Części zamienne Schneider Automation – Niezawodne rozwiązania dla automatyki przemysłowej

This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It features 3 built-in RJ45 communication ports as standard, 1 Ethernet port, 2 serial ports. It works at a rated supply voltage from 380V to 480V AC. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 0.75kW / 1hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 0.37kW / 0.5hp for applications requiring significant overload (up to 150%). It weighs 4.5kg and its dimensions are, 144mm wide, 350mm high, 203mm deep. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. Accessories (fan kit, graphic display terminal) and options (I/O expansion modules, communication modules, EMC input filters) are available with Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.

This sub-base is part of the Modicon ABE7 series, specifically designed for the Telefast pre-wired system. It accommodates 16 channels, each equipped with a switch disconnector, facilitating efficient control signal management for PLC systems. The output sub-base operates within a supply voltage range of 19V to 30V and includes screw clamp terminals ensuring secure electrical connections. With a compact design, the dimensions are 211 mm in width, 74 mm in depth, and a height of 89 mm. This unit has a net weight of 0.67 kg and is rated at IP2X, providing a degree of protection suitable for various industrial applications. Installation is straightforward, utilizing clips for a 35mm symmetrical DIN rail or screws for solid plate mounting. This product’s exceptional shock and vibration resistance, rated at 15 gn and 2 gn respectively, makes it suitable for demanding environments. The Modicon ABE7 designation signifies a streamlined approach to wiring in automation systems, enhancing operational simplicity. Certified by multiple international standards including GL, CSA, and UL, this sub-base meets rigorous requirements for environmental and operational safety. It is also compliant with various sustainability regulations, ensuring minimal environmental impact.

The product is a 60mm plinth intended for compatibility with PanelSeT PLA enclosures. With a height of 60mm and a depth of 1270mm, this plinth serves versatile applications. The assembly includes fixing elements along with one plinth, constructed from grey plastic (RAL 7035).Notably, this product adheres to sustainability standards, classified as a Green Premium item with minimal hazardous substances. It complies with the China RoHS regulation and is mercury-free. The fixing mode is achieved through screws at the enclosure's bottom and fixing elements on the floor, ensuring stable installation.The plinth is part of the PanelSeT range and is designed for multi-purpose applications, making it a practical choice for various setups.

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 22A. This Altistart 01 can be used for a motor rated power up to 5.5kW or 7.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The auxiliary contact block is compatible with mini contactors LC1SK, LP1SK and mini control relays CA2SK, CA3SK. It is designed to provide two normally open (2NO) contacts, rated up to 10A and 690V AC, offering reliable performance through screw clamp terminal connections. Designation Code: LA1SK.This component is front-mounted via a clip-on mechanism, ensuring durability and reliability under various operational conditions. The device operates within an ambient temperature range of -20°C to 50°C and can withstand storage temperatures between -50°C and 70°C. With an IP2X protection rating and a maximum operating altitude of 2000 meters without derating, it is suitable for diverse industrial environments.The product meets multiple standards including IEC, UL, and CSA certifications, and is compliant with Green Premium and RoHS regulations, affirming its sustainable design. Its compact dimensions, with a width of 27 mm and a net weight of 0.022 kg, facilitate easy integration into existing systems.

This complete illuminated beacon is engineered as a lighting accessory specifically for tower lights. With an integral flash discharge tube, it emits a strobe light that effectively indicates machine status. Its application is suitable across various industries, including automotive, machine tools, material handling, packaging, assembly stations, and conveyors. Designed to withstand harsh operational conditions, the beacon is rated IP65 for dust and water resistance and can endure vibrations. The ambient air temperature range for storage is between -40 to 70 °C, making it versatile for extreme environments. The device also complies with multiple safety standards, including IEC 60947-5-1, ensuring reliable performance.With a flash energy of 10 joules and a flashing frequency of 1 Hz, the beacon requires a current consumption of less than 1300 mA AC and less than 850 mA DC. The overall dimensions are 232 mm in height and a mounting diameter of 70 mm. The product is constructed from glass reinforced polyamide for the base unit and polycarbonate for the illuminated unit, enhancing its durability.

The TeSys Vario switch disconnector, model VBD02, is engineered for main switching in motor applications, supporting up to 4kW with a rated operational voltage of 690V AC. This device is specifically designed for door mounting with a Ø22.5 mm fixing hole and features a black and grey operator, ensuring easy access and control.With an IP65 protection rating, this switch disconnector is suitable for various environments, offering durability against dust and water ingress. It operates effectively within an ambient temperature range of -20 to 50 °C. The product is also multi-standard certified, complying with standards including IEC, UL, CSA, and more, while being Green Premium compliant.Enhancing its versatility, the switch supports the attachment of additional poles for neutral, earthing, and auxiliary functions. It incorporates rotary handle padlocking for enhanced safety, allowing for up to three padlocks. The mechanical robustness of the device enables it to withstand vibrations and shocks, adhering to IEC standards for reliability.

The LRD thermal overload relay is engineered for the protection of three-phase motors up to 7.5 kW at 400 V. It operates within a thermal setting range of 12 to 18 A and features a tripping class of 10A, ensuring reliable performance under various operational conditions. This device includes a thermal adjustment dial, manual and automatic reset selectors, and a test selector for simulating tripping conditions. It is equipped with reset and stop buttons, a flag indicator, and two auxiliary contacts (1 NO + 1 NC) for fault signaling.Protection settings are secured with a lockable transparent cover, and connections are made via screw clamp terminals, allowing for direct attachment to the bottom terminals of compatible three-pole contactors, specifically models LC1D18-D38. The relay can be mounted on a DIN rail or fixed via screws, with the option to use a terminal block (LAD7B106) for separate installations.This thermal overload relay meets multiple industry standards, including IEC, UL, CSA, and ATEX, and is compliant with Green Premium requirements (RoHS/REACH). It operates effectively in ambient temperatures ranging from -20 to 60 °C without derating, and demonstrates mechanical robustness against vibrations (6 Gn) and shocks (15 Gn for 11 ms), conforming to IEC 60068 standards.

The basic frame for the MasterPact MTZ1 10H1 drawout circuit breaker is engineered to accommodate a rated current of 1000A. It operates at a maximum voltage of 690VAC across 50/60Hz networks. This frame exhibits a breaking capacity of 42kA (Icu) at 415VAC and is compliant with international standards including IEC/EN 60947-1 and IEC/EN 60947-2. MasterPact MTZ, as a high current air circuit breaker, is suited for safeguarding electrical systems against overloads, short circuits, and ground faults.Measuring 288mm in width, 322mm in height, and 291mm in depth, the frame must be paired with the appropriate chassis and the MicroLogic X control unit, which is sold separately. Notably, the device is designed for a variety of applications and can be integrated into EcoStruxure architectures, enhancing both safety and energy efficiency.This circuit breaker frame is capable of withstanding operational environments ranging from -25°C to 70°C and is rated for a mechanical durability of 12,500 cycles with periodic maintenance. Additionally, it has a rated insulation voltage of 1000V and an impulse withstand voltage of 12kV, ensuring robust performance.

The Counter Module from the Modicon TM5 series is designed for precise counting applications, providing a single incremental encoder input capable of handling a frequency of 100 kHz. It integrates seamlessly into modular I/O systems for automation solutions, offering flexibility and scalability in configuration.This module operates within a maximum cycle time of 2 ms and supports counter input resolutions of 16 bits or 32 bits. It features 500 Vrms AC insulation between the channel and bus, ensuring reliable operation in diverse environments.With a compact design measuring 99 mm in height, 12.5 mm in width, and 75 mm in depth, it weighs only 0.025 kg, making it suitable for space-constrained installations.Operating conditions are optimal between 0 to 55 °C without derating, and it can withstand ambient temperatures up to 60 °C with a derating factor. The module is rated IP20, conforming to IEC 61131-2 standards, making it suitable for various industrial applications such as production, packaging machinery, and material handling systems.It is compatible with Modicon LMC058 and Modicon M258 controllers, providing a robust solution for complex machine environments. This product is compliant with multiple international standards and certifications, including IEC 61131-2, UL 508, and CSA C22.2 No 142, ensuring reliability and safety.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 115A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 30HP at 200 to 208VAC, 40HP at 240VAC, 75HP at 480VAC and 100HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with a 600VAC up to 250A circuit breaker, this contactor can have a SCCR up to 50kA. When used with 600VAC Class J or CC fuses up to 250A, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The compact enclosure features a plain door and is specifically designed for wall mounting. With dimensions of 1200 mm in height, 600 mm in width, and 300 mm in depth, it provides a versatile solution for various applications. The enclosure is composed of a single folded steel body, equipped with a reversible (120°) door that includes a 3-point lock for enhanced security. The door and body are constructed from steel with security glass, finished in a durable epoxy polyester powder with a grey RAL 7035 color. Designed to meet IP66 and IK10 protection standards, it ensures a high level of resistance against dust and water ingress. Installation is facilitated through a front-access design, making it practical for operations. The door is removable via hinges, while the cable gland plate can be accessed through screws, providing flexibility for maintenance. This enclosure is certified to IEC 62208 standards and is part of the Spacial range, known for its compact solutions.

The XUSL Type 4 Safety Light Curtain is specifically designed for detecting the presence of hands in hazardous areas, ensuring operator safety around machinery. It employs a transmitter-receiver system that generates 16 light beams, effectively covering a protected height of 310 mm.This device is characterized by its PFHD reliability data of 8.2 x 10⁻⁹, which signifies its high safety performance. The aluminum casing enhances durability, while integral LEDs provide local signaling for clear visibility of operational status. The system can function independently or in conjunction with a compatible safety control unit.Equipped with two normally open (NO) solid-state PNP safety outputs (OSSDs), it adheres to rigorous safety standards, achieving category 4 compliance, performance level PL e, and SIL 3 as outlined in EN/ISO 13849-1, EN/IEC 61508, and EN/IEC 61496-1/2. The operating temperature range spans from -30°C to +55°C, allowing for versatility in various environments, with selectable sensing distances of either 0 to 4 meters or 0 to 12 meters, depending on wiring configurations.

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 18.5kW / 25hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 11.65kg and its dimensions are, 245mm wide, 330mm high, 190mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet. It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.

This terminal is an accessory of soft start / soft stop Altistart 48 range. Setting the new industry standard for soft starts, the Altistart 48 controls the applied motor torque, making it ideal for a wider variety of applications than a traditional voltage ramp soft start with the current limit. In pumping applications, the Altistar 48 with TCS eliminates the long start and stop times, the hydraulic transients and slamming of check valves associated with "pump version" voltage ramp soft starts. Every ATS 48 soft start model is rated for all North American industrial and commercial voltages (208, 240, 480, and 600V). It is equipped with a 3m connection cable, with 9-way SUB-D connectors at the terminal end and RJ45 at the Altistart 48 end. Networking for remote monitoring and control using Modbus, Ethernet, DeviceNet, and other protocols. Alistart 48 is accepted internationally: Meets UL, CSA, CE, NOM, CCC, C-Tick, GHOST, and DNV. It is used to set and configure the soft start/soft stop unit remotely and display the soft start/soft stop unit status and detected errors remotely.

This set comprises four vertical uprights specifically designed for use with the Spacial SF enclosure. With a height of 2000 mm, these uprights are suitable for multi-purpose applications. They support mounting on both the bottom frame and the top frame with roof, ensuring compatibility with the Spacial framework kit, rear panel, and side panel.Constructed from steel, the uprights feature a textured epoxy polyester surface finish in grey RAL 7035. Fixing is achieved using M8 screws, providing a secure installation. The dimensions of each upright are 45 mm in width and 45 mm in depth, with a focus on durability and structural integrity.

This mechanical lug kit is an essential electrical accessory for transformers, specifically designed to handle a line rated current of 250A. It supports wire sizes ranging from 350kcmil to 6 AWG, ensuring compatibility with a variety of transformer configurations.Manufactured from aluminium, this kit includes a set of five lugs, which consists of bonding and ground lugs suitable for stranded wire sizes from AWG 14 to AWG 2/0, along with necessary nuts and bolts for secure installation. The components are optimized for both single-phase primary and three-phase wye or delta secondary transformer applications.These lugs are engineered to facilitate reliable connections in both indoor and outdoor environments, contributing to the overall safety and performance of transformer installations. The product is compliant with various sustainability standards, including being PVC free and free from toxic heavy metals, aligning with environmental regulations.

The operating handle, designated as KCC1LZ, is specifically crafted for use with the TeSys Vario switch-disconnector. It includes a red handle that is not padlockable and a yellow front plate measuring 45x45 mm, suitable for central fixing on doors. This handle facilitates direct operation of VN12, VN20, and V02 to V2 switch bodies, either directly or through an extension shaft.Designed for both main and emergency stop functions, this product ensures IP65 protection, compliant with NEMA types 1 and 12, enhancing its suitability for various environments. The front plate features clear I-O indicators and is mounted with a central hole, ensuring secure installation. The product also complies with Green Premium standards, adhering to RoHS and REACh regulations, and is free from substances of very high concern as defined by the respective regulations.

The XUB photoelectric emitter, designed for a supply voltage range of 12 to 24 VDC, utilizes an infrared thru beam emission system. With a cylindrical design measuring 18 mm in diameter and a length of 60 mm, it is equipped to function in extreme temperatures, operating between -25°C and +55°C. The housing is made from PBT, ensuring durability in demanding environments, while the lens is constructed from PMMA for scratch resistance.This emitter features a standard M12 connector for compatibility with existing sensor cabling. It has a maximum sensing distance of 20 m and requires a receiver for detection. The device supports a current consumption of 35 mA with a switching frequency of up to 500 Hz. Its IP65, IP67, and IP69K ratings ensure protection against dust and water ingress, making it suitable for harsh conditions.Additionally, the sensor is equipped with a single LED indicator for operational status and features double insulation for enhanced safety against electrical shocks. The XUB emitter is also compliant with various safety standards, including CSA and UL, highlighting its reliability in industrial applications. The product is recognized as a Green Premium offering, emphasizing its sustainable design.

The 3D fixing kit, equipped with a ball-joint mounting bracket, is specifically tailored for M12 rods associated with XUM photoelectric sensors. This design enhances flexibility, allowing for optimal alignment of the sensor beam in relation to various applications.Compatible with the XUZC50 and XUM models, this accessory falls under the category of mounting and fixing accessories. It serves miniature sensors effectively, ensuring that installations are both secure and adaptable to specific needs.It is important to note that this product aligns with sustainability standards, being classified as a Green Premium product. It is free from mercury and complies proactively with the EU RoHS Directive, although it contains substances of concern as indicated by the REACH Regulation. Caution is advised due to California Proposition 65 warnings regarding potential exposure to certain chemicals.