Wyszukiwarka produktów

The VC-AML 7 contact insert is engineered for use within the VARIOCON range, featuring a housing constructed from PA in a light grey finish. This insert provides 7 positions and is rated for a maximum voltage of 690V and a current of 63A. It employs a PCB connection method with pin-type contacts, ensuring a reliable interface. Note: Connectors must only be connected or disconnected when not under load.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a 110 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as stanard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The XS5 series presents a cylindrical inductive proximity sensor designed for non-contact detection of metallic objects. With a diameter of 6.5mm and a length of 42mm, this sensor is constructed from stainless steel grade 303, ensuring durability in industrial settings. It is equipped with an M8 connector for electrical connection and complies with the IP67 degree of protection as per IEC 60529, making it suitable for challenging environments.This sensor operates within a voltage range of 12 to 24 VDC and features a PNP output with a normally closed (NC) function. Its nominal sensing distance is 1.5mm, allowing for effective detection while minimizing wear on both the sensor and the detected objects, including fragile or freshly painted surfaces. The response time is rapid with a maximum delay of 0.1 ms, and it supports a switching frequency of up to 5000 Hz.Additionally, the sensor is designed to handle a switching capacity of up to 200 mA DC and has overload and short-circuit protection. The device is also environmentally friendly, marked as a Green Premium product, and meets various regulatory standards including CSA and UL certifications.

This Schneider Electric XU, XUB Reflex Photoelectric Sensor is designed with a durable PBT case for high temperature resistance. It features a mono-mode cylindrical design with a plastic body, making it suitable for direct surface or bracket mounting via its outer thread and twin nuts. The sensor boasts a VALOX® PBT high strength case for enhanced durability in challenging conditions and a PMMA scratch-resistant lens to ensure maximum sensor longevity.The sensor is equipped with a single LED display, enabling users to easily monitor its status. It operates within a voltage range of 12V to 24V DC and can function effectively in temperatures ranging from -25°C to +55°C. The sensor provides double insulation for improved safety and protection against electrical shocks.This photoelectric sensor is certified by both CSA and UL, ensuring its reliability and compliance with industry standards. With its IP65 and IP67 rating, this sensor is ready to perform in the harshest environments.

The adaptor facilitates the integration of electrical blocks onto printed circuit boards with a thickness of 3.2 mm ± 0.2 mm. It serves as an essential component for ensuring the proper connection and functionality of devices within the Harmony XB4 and XB5 series. The IP20 protection index offers safety by preventing accidental contact with live circuits.This product is constructed from plastic and weighs 0.008 kg. It is sold in sets of ten, making it suitable for bulk applications. The adaptor complies with multiple environmental regulations, including California Proposition 65, which warns that exposure to lead and lead compounds may pose health risks. It is recognized as a Green Premium product, emphasizing its sustainable design and compliance with RoHS and REACH regulations.

The Masterpact MTZ2 25H1 Drawout Circuit Breaker Frame is a robust solution designed to protect electrical systems from damage caused by overloads, short circuits, and equipment ground faults. This frame is compatible with the Masterpact MTZ series of high current air circuit breakers, which incorporate advanced digital technologies.The breaking capacity (Icu) of this frame is 66kA rms at 440VAC 50/60Hz, and it is rated for a current of 2500A. This frame must be associated with the corresponding chassis, which can be ordered separately. It is also compatible with the Micrologic X control unit, which can be purchased separately.The Masterpact MTZ series contributes to safety and energy efficiency when used with the Micrologic X control unit. It can be equipped with a variety of optional functions and accessories. The dimensions of this frame are 556mm (W) x 439mm (H) x 403mm (D).This product is compliant with international standards such as IEC 60947, UL489, CCC, EAC, and marine specifications. The Masterpact MTZ and Micrologic X are part of the EcoStruxure architecture system.

The Light Block ZBVM8 is designed with a yellow housing and features an integral LED for illumination. Operating at a supply voltage of 230...240 V AC, it utilizes screw clamp terminals for straightforward installation, accepting cables up to 2 x 1.5 mm² with cable ends or 1 x 0.22 mm² without. Its design facilitates fast replacement and configuration of signaling units, ensuring compatibility with illuminated push-button or selector switch units.With a service life of 100,000 hours at rated voltage and 25 °C, the device minimizes maintenance downtime. The IP20 protection index safeguards operators from accidental contact with live circuits, while the vibration-resistant screw clamp terminals make it suitable for installation in high-impact environments. The product is compliant with various international standards including UL, CSA, and IEC, ensuring reliable performance under diverse conditions.This product is part of the Harmony XB4 and XB5 ranges and is characterized by its steady yellow signaling type, making it ideal for various industrial applications.

The LFT300603C - LFT Series Fuse Block is engineered for use with Class T fuses, offering a rated current of 60 Amperes. This model supports a voltage rating of up to 300 VAC. It is designed for efficient installation using either bolt-in or DIN rail mounting methods, which enhances its adaptability in various electrical systems.These fuse blocks provide significant space savings compared to earlier versions, making them a practical choice for optimizing panel layouts. The design focuses on improving functionality while maintaining compliance with industry standards, ensuring reliable performance in demanding applications.

The Amp-Trap 2000 SmartSpot A2D-R fuses are engineered to deliver IEC Type 2 "no damage" protection for mains, feeders, and branch circuits that cater to both motor and non-motor loads. Rated at 250V and 30A, these time-delay fuses are capable of rapid interruption under extreme fault conditions, thus ensuring maximum short circuit protection. This capability helps to safeguard motor starters, switches, and various other circuit components from potential damage.Moreover, the time-delay feature of the A2D-R fuses accommodates the in-rush currents associated with motors, making them suitable for a variety of applications. These fuses can also effectively replace outdated 250V Class H, K, or RK5 fuses currently in use. The design includes a SmartSpot® indication system to provide visual feedback on fuse status.Constructed with a poly tube body and fitted with tin-plated copper terminals, this fuse is compliant with ROHS standards. Its clip mounting style and dimensions of 2 inches in length and 0.56 inches in diameter make it adaptable for numerous installations.

The PCMB-9 Pre-Printed Wire Marker Book contains a total of 900 durable wire labels made from vinyl cloth, ensuring longevity for up to 5 years under various environmental conditions. Each book is compact and designed for ease of handling, with markers that can be easily torn to label both ends of a conductor. The legend includes markers numbered 1-3 and letters A-C, along with L1-L3 and T1-T3, providing a comprehensive labeling solution. The book comprises 10 pages, with 30 to 45 markers available per legend.With a maximum operating temperature of 77°C (170°F) and a minimum of -40°C (-40°F), these markers are suitable for a range of industrial applications. The write-on area measures 143 mm (5.63 in) in height, and the markers themselves are 886.4 mm (34.9 in) long and 5.58 mm (0.22 in) wide. Markers are compliant with RoHS standards, ensuring they meet environmental safety regulations.

The 4 Pole Contactor AF09-22-00-11 operates effectively under a rated operational voltage of 690 V in accordance with IEC standards. It is designed for motor control applications, capable of handling motors rated up to 4 kW at 400 V AC (AC-3) and switching power circuits up to 25 A (AC-1). This contactor features a wide control voltage range of 24-60 V at 50/60 Hz and 20-60 V DC, allowing it to accommodate significant variations in control voltage. This capability reduces energy consumption within panels and enhances operational reliability in unstable electrical networks.Incorporating built-in surge protection, the AF09 model offers a compact design that can be extended with auxiliary contact blocks and a variety of accessories. It adheres to various standards, including IEC/EN 60947-1 and UL 508, ensuring compatibility and safety in diverse applications.Furthermore, the contactor supports dynamic mounting options on DIN rails, specifically TH35-15 and TH35-7.5, and features screw terminals for secure connections. The degree of protection for both coil and main terminals is IP20, in compliance with IEC 60529, ensuring adequate safety against dust and moisture in typical installation environments.

The Telemecanique Safety Switch, Model XCS, is a versatile device that converts mechanical motion into electrical control signals. Its robust metal construction ensures durability in hazardous environments. Key Features: 2 normally closed + 1 normally opened slow break contacts Rated operational current of 1.5A at 240V AC, 3A at 120V AC, 0.27A at 250V DC, and 0.55A at 125V DC IP67 rated for protection against dust and water Certified by CSA and UL to meet various safety standards including EN/IEC 60947-5-1, EN/IEC 60204-1, EN/ISO 12100, EN 1088/ISO 14119, and UL 508 This switch is designed to operate in hazardous environments and offers long mechanical durability of about 1 million operating cycles. It comes with screw clamp terminals for electrical connection and 2 cable entry tapped for PG13 cable gland. Dimensions: 98mm (Width) x 44mm (Depth) x 146mm (Height) Applications: Used in various sectors including packaging, handling, robotics, machine tools, presses, and automotive sector

The PowerPacT B-Frame circuit breaker is designed for thermal-mechanical circuit protection in a compact form factor. With a rated breaking capacity of 25kA at 600Y/347VAC, it is suitable for various distribution applications. This unit incorporates dual-break rotating contacts to minimize peak current during short circuit conditions.Equipped with a manual trip feature via a push-to-trip button, this device allows for straightforward operation. The unit mount construction enables traditional back pan or DIN rail installation, providing flexibility in mounting options. Additionally, the circuit breaker utilizes EverLink lugs, a patented design that enhances connection reliability by reducing cable loosening over time.This specific model adheres to multiple standards, including UL, CSA, and IEC, ensuring compliance and safety. It is constructed to withstand harsh environments, with an operational temperature range of -25°C to 70°C and a storage temperature range of -50°C to 85°C. The device also meets pollution degree 3 and offers an IP40 rating for front cover protection.The PowerPacT B, 50A, 1 pole circuit breaker is ideal for applications requiring dependable circuit protection and is marked with the Designation Code BJ 050.

The Phoenix Contact TC MGUARD RS2000 4G VPN router is a robust industrial-grade device designed for secure remote communication and network connectivity in demanding environments. It integrates a high-speed 4G LTE cellular interface, offering global connectivity with fallback to UMTS and CDMA networks for reliable operation. This router features a built-in 4-port 10/100 Mbps Ethernet switch, allowing for local networking of industrial equipment.

The PowerPacT B-Frame circuit breaker delivers thermal-mechanical circuit protection in a compact design, accommodating a variety of connection options and accessories. With a breaking capacity of 14kA at 600Y/347VAC, this device is engineered for reliable operation under demanding conditions. Equipped with dual-break rotating contacts, it minimizes peak current during short circuit events. The integral push-to-trip button allows for manual interruption of the circuit. This model features a 2-pole unit mount construction that supports both traditional back pan mounting with screws and integrated DIN rail mounting for flexible installation. With a rated continuous current of 80%, the circuit breaker is designed to meet various standards, including UL, CSA, and IEC, ensuring compliance and safety. The physical dimensions include a height of 137 mm, width of 54 mm, and depth of 80 mm, with a weight of 0.669 kg. The device operates effectively across a temperature range of -25 to 70 °C and is suitable for isolation as per IEC standards.

The IEC contactor is suitable for integration into various control systems and can be utilized for motor starters across a wide range of applications. Specifically, this model is rated for inductive loads up to 65A and has the capability to manage 40HP at 480VAC three-phase power. It can also support 20HP at 240VAC and 5HP at 115VAC single-phase. The contactor is designed to accommodate a short-circuit current rating (SCCR) of up to 100kA when paired with appropriate circuit breakers or fuses.Featuring a coil voltage of 230VAC at 50/60Hz, the contactor is equipped with one normally open and one normally closed auxiliary contact, with the latter being mirror certified for safety. Installation options include mounting on DIN rails or directly to panels. The contactor's dimensions are 122mm in height, 70mm in width, and 118mm in depth, with a weight of 2.185kg.This component meets several international standards, including IEC and UL certifications, and adheres to RoHS/REACh regulations, classifying it as a Green Premium product. Its construction ensures a high level of mechanical robustness, capable of withstanding shocks and vibrations as specified, making it suitable for diverse operational environments.

The FP 1,27/ 68-MH is designed as a male SMD connector, providing a reliable connection with a nominal current rating of 1.4 A and supporting a test voltage of 500 V AC. It features a total of 68 positions, arranged with a pitch of 1.27 mm, allowing for efficient use in compact electronic applications. The connector is finished in black, with gold contact surfaces that ensure optimal conductivity and durability. It is specifically intended for SMD soldering, making it suitable for various PCB assembly processes.

Our magnetic field sensors are specifically designed for integration into various applications. They can be easily mounted on cylinders with tie rods and DUO rails using mounting brackets. These sensors are suitable for the most common types of cylinders, regardless of their piston diameter.Key Features:Contact-free detection of piston positionTie rod diameter up to 17 mmReliable switching behaviorWear-free and resistant to dirtSecure gripEasy installation

Introducing the Siemens Key Operated Switch, a versatile component designed for industrial applications. This switch boasts a round shape with a diameter of 22mm, constructed from plastic yet featuring a metal front ring for enhanced durability. The lock number SSG10 ensures reliable operation, while two keys provide seamless switching between two positions (O-I).The latching mechanism guarantees secure engagement, and the actuating angle of 90° allows for easy manipulation. This switch is rated for a lifespan of 10:30h/13:30h, ensuring long-term reliability. A unique feature of this switch is its key removal capability, enabling convenient access to the switch positions.

The D-SUB contact carrier, shell size 3, supports 44 signal contacts and is specifically designed for use with crimp contacts. This component features a straight contact socket and is equipped with a 3 mm hole for secure fixation, making it ideal for integration into panel mounting frames and sleeve housings such as the VS-25-BU-DSUB-HD-CD-B.Manufactured in Germany, this contact carrier has a degree of protection rated at IP20 and operates effectively within an ambient temperature range of -55 °C to 115 °C. The product is shielded, ensuring reliable signal transmission, and it is rated for a maximum voltage of 60 V and a rated current of 3 A at 20 °C. With a weight of 8.11 g (excluding packing), the contact carrier is constructed from metal housing coated with a metal-plated surface, while the contact surface is finished with gold for enhanced conductivity.Additional features include a flammability rating of UL 94 V0 and a robust glass-fiber reinforced thermoplastics carrier material. This ensures durability with a minimum of 500 insertion/withdrawal cycles, making it suitable for various high-position applications.