Phoenix Contact 2980348

The PLC-BSC-230UC/1/SEN/SO46 is a 6.2 mm wide PLC basic terminal block designed to enhance operational reliability by incorporating both interference current and interference voltage protection on the control side. This model utilizes a screw connection and is configured without a relay or solid-state relay, ensuring a streamlined design.

Notably, it features a sensor supply voltage distribution (BB), accommodating an input voltage of 230 V AC. The device operates at a typical input current of 8.8 mA, with a maximum inrush current of 30 A for a duration of 10 ms. The response time is typically 6 ms, while the release time is around 10 ms, allowing for efficient switching capabilities.

The terminal block supports a conductor cross-section of 0.14 mm² to 2.5 mm² for both rigid and flexible conductors, and the connection method is via a screw terminal with a stripping length of 8 mm. The device is rated for a maximum switching voltage of 253 V AC and a minimum switching voltage of 24 V AC, with a limiting continuous current of 0.75 A. For additional safety, the enclosure must provide requisite protection during installation according to relevant regulations.

Suitable for DIN rail mounting, this terminal block can be installed in various positions and is designed for ambient operating temperatures ranging from -40 °C to 55 °C. It conforms to several safety and compatibility standards, including IEC/EN 60664-1 and has a flammability rating of V0 according to UL 94.