SU16KRT-1TF

Overview

UPC Code

037332158253

UPS Type

On-Line

Output

Output Volt Amp Capacity (VA)

16000

Output kVA Capacity (kVA)

16.00

Output Watt Capacity (Watts)

14400

Output kW Capacity (kW)

14.40

Power Factor

0.9

Crest Factor

3:1

Nominal Voltage Details

This configuration requires the Power Module be set to 208 or 240V output voltage; included step-down transformer supports 120V output (when the voltage-selection switch on the transformer module is set to match the 208 or 240V power module setting)

Frequency Compatibility

60 Hz

Frequency Compatibility Details

Output frequency regulation +/- 0.05Hz (free running)

Output Voltage Regulation (Line Mode)

+/- 2%

Output Voltage Regulation (Battery Mode)

+/- 2%

Output Receptacle Details

Total 120V output is limited to 4992 watts for 208V input and 5760 watts for 240V input. Additional 120V capacity is available by adding a second SU6000XFMR2U step-down transformer.

Output Circuit Breakers

POWER MODULE: Two built-in 30A breakers protect one L6-30R outlet each, Eight built-in 20A breakers protect one C19 outlet each; TRANSFORMER MODULE: Two 15A breakers protect 2 5-15R outlets each, Two 20A breakers protect 4 5-15/20R outlets each

Output AC Waveform (AC Mode)

Pure Sine wave

Output AC Waveform (Battery Mode)

Pure Sine wave

Output Capacity Details

Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less

Nominal Output Voltage(s) Supported

120V; 208V; 240V

Output Receptacles

(4) 5-15R; (8) 5-15/20R; (2) L6-30R; (8) C19

Individually Controllable Load Banks

No

Input

Rated input current (Maximum Load)

88.4A (208V), 76.6A (240V)

Nominal Input Voltage(s) Supported

208V AC; 240V AC

UPS Input Connection Type

Hardwire

UPS Input Connection Description

3 wire single phase input (L1, L2, G)

Recommended Electrical Service

100A @ 208V, or 240V (L1, L2, G)

Input Phase

Single-Phase

Battery

Full Load Runtime (min.)

5.5 minutes (14,400 watts)

Half Load Runtime (min.)

13.5 minutes (7200 watts)

Expandable Battery Runtime

Runtime is expandable with external battery packs

External Battery Pack Compatibility

BP240V10RT3U; BP240V787C-1PH

Expandable Runtime Description

For best results, add external batteries in multiples of two so that both included 8kVA power modules have an equal number and type of connected battery packs

DC System Voltage (VDC)

240

Battery Recharge Rate (Included Batteries)

Less than 6 hours from 10% to 90% (typical, full load discharge)

Battery Replacement Description

Hot-swappable, user replaceable external battery packs

Expandable Runtime

Yes

Voltage Regulation

Voltage Regulation Description

2% output voltage regulation in standard online, double-conversion mode

Overvoltage Correction

Corrects overvoltages up to 300V

Undervoltage Correction

Corrects undervoltages as low as 100V

User Interface, Alerts & Controls

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options; LED/LCD panel rotates for viewing in rack/tower formats; LCD Display supports ENGLISH, FRENCH, GERMAN, ITALIAN, SPANISH and PORTUGUESE (see manual)

Switches

2 Switches control off/on power status and alarm-cancel/self-test operation; 2 additional switches support set and execute scrolling LCD functions; bundled PDU includes bypass switch to enable hot-swap UPS power module replacement

Alarm Cancel Operation

Alarm cancel switch

Audible Alarm

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

LED Indicators

6 LEDs indicate line power, online mode, bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options

Surge / Noise Suppression

UPS AC Suppression Joule Rating

2565

UPS AC Suppression Response Time

Instantaneous

EMI / RFI AC Noise Suppression

Yes

Physical

Cooling Method

Fans

Included Battery Pack Dimensions (hwd / in.)

5.25 x 17.50 x 25.00

Included Battery Pack Weight (lbs.)

158.7

Included Mounting Accessory Description

5 sets of adjustable 4 post rack rails included (one for each included 2U/3U module)

Installation Form Factors Supported with Included Accessories

4 post 19 inch rackmount

Installation Form Factors Supported with Optional Accessories

2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)

Maximum Device Depth (in.)

32.5

Minimum Required Rack Depth (inches)

37.5

Optional Mounting Accessory Notes

Qty 5 2POSTRMKITHD required for 2 post rackmount installation; Qty 2 2-9USTAND required for tower installation

Primary Form Factor

Rackmount

Primary UPS Depth (mm)

656

Primary UPS Height (mm)

131

Primary UPS Width (mm)

445

Rack Height

14U

Shipping Dimensions (hwd / in.)

31.50 x 40.00 x 51.00

Shipping Weight (lbs.)

678.00

Stepdown Transformer Depth (mm)

554

Stepdown Transformer Dimensions (hwd / in.)

3.50 x 17.50 x 21.80

Stepdown Transformer Height (mm)

89

Stepdown Transformer Weight (lbs.)

72.6

Stepdown Transformer Width (mm)

445

UPS Dimensions Details

Includes 2 SU8000RT3UPM UPS/Power modules, 2 BP240V10RT3U Battery packs, 1 SU6000XFMR2U transformer and SUPDMB20K parallel bypass PDU; Listed weights and dimensions for UPS/Power module, battery pack and transformer each refer to a single unit; MAXIMUM DEVICE DEPTH specification refers to the whole UPS installed depth with parallel bypass PDU installed

UPS Housing Material

Steel

UPS Power Module Dimensions (hwd, in.)

5.14 x 17.50 x 25.82

UPS Power Module Weight (kg)

19.50

UPS Power Module Weight (lbs.)

43

Environmental

Operating Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

Relative Humidity

0 to 95%, non-condensing

AC Mode BTU / Hr. (Full Load)

5464

Battery Mode BTU / Hr. (Full Load)

4864

AC Mode Efficiency Rating (100% Load)

90%

Operating Elevation (ft.)

0-3000m (0 to 10,000 ft.)

Audible Noise

60 dBA at front side 1 meter

Operating Elevation (m)

0-3000 m

Communications

Network Management Cards

SNMPWEBCARD; TLNETCARD; WEBCARDLX; MODBUSCARD; RELAYIOCARD

Network Monitoring Port Description

Applications utilizing any supported network management card option, require the installation of two of the same model network card – install one card per included UPS power module; RELAYIOMINI installation requires removal of panel containing USB ports on each included UPS power module

PowerAlert Software

For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert

Communications Cable

USB, DB9 serial and EPO cables included

WatchDog Compatibility

Supports Watchdog application, OS and hard-reboot restart options for remote applications

Communications Interface

USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Line / Battery Transfer

Transfer Time

No transfer time (0 ms.) in online, double-conversion mode

Low Voltage Transfer to Battery Power (Setpoint)

100V

High Voltage Transfer to Battery Power (Setpoint)

300V

Special Features

Cold Start (Startup in Battery Mode During a Power Failure)

Cold-start operation supported

High Availability UPS Features

Automatic inverter bypass; Battery Independent Restart; Hot swappable UPS power module; Hot swappable batteries; Manual bypass switch

Green Energy-Saving Features

Support for daily startup and shutoff

Certifications

UPS Certifications

Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances)

UPS Certification Details

IEC 61000-4-5 1995 B Surge Immunity

Warranty

Product Warranty Period (Worldwide)

2-year limited warranty

Connected Equipment Insurance (U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

Documents