Schneider Electric
831VS-240A
1 / 1
Description
The SE Relays 831 series voltage sensor, single-phase AC voltage sensing device is designed to be wired across terminals A1 and A2 with the voltage being monitored. Voltage sencor is capable of monitoring and reacting to overvoltage and undervoltage conditions. The Umax dial is used to set the upper trip-point of 85VAC to 150VAC for the voltage sensor. The Umin dial is a 30–99% of upper preset of the Umax dial and is used to set the lower trip-point for the voltage sensor. Relay has SPDT silver alloy contacts, rated 15A at 12VAC. The timing dial is used to delay the transfer of the contacts, from 0s to 10s, when a set point has been violated. Three-state indication LEDs indicates normal state by green LED and two types of faulted states by blinking red LED as timing state and steady on red LED as energized relay. Direct mount on a 35mm DIN rail, narrow width 17.5mm makes this relay ideal for tight spaces.- Country of Origin
- CZ
- Part Number
- 831VS-240A
- EAN
- 39122316
- UNSPSC
- 39122316
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Specifications
- Range Of Product
- Legacy
- Contacts Material
- AgNi
- Product Or Component Type
- relay
- Sensor Type
- voltage sensor
- Switch Function
- SPDT
- Time Delay Type
- adjustable
- [Us] Rated Supply Voltage
- 14...276 V AC 50...60 Hz
Complementary
- Height
- 65.4 mm
- Hysteresis
- 2-6 % adjustable from fault to OK state overvoltage or undervoltage detection
- Maximum Switching Voltage
- 12 V
- Control Type
- with adjustment knob front
- Time Delay Range
- 0...10 s
- Power Consumption In Va
- 1.2 VA 240 V
- Net Weight
- 62 g
- [Ie] Rated Operational Current
- 15 A at 240 V AC || 15 A at 120 V AC
- Temperature Drift
- < 1 %/°C
- Local Signalling
- 1 LED red, blinking timing in progress || 1 LED per input green
- Awg Gauge
- AWG 14
- Tripping Threshold
- 160...276 V AC factory setting) || 30...99 % of Us Auto calibration
- Minimum Switching Current
- 100 mA
- Mounting Support
- 35 mm DIN rail conforming to EN 55022
- Nominal Output Current
- 15 A
- Mechanical Durability
- 30000000 cycles
- Width
- 17.6 mm
- Depth
- 89.9 mm
- Maximum Horse Power Rating
- 0.5 hp 120 V AC || 1 hp 240 V AC
- Electrical Durability
- 70000 cycles
- Tightening Torque
- 0.8-0.8 N.m
- Breaking Capacity
- 4000 VA AC-1 || 384 W DC-1
- Repeat Accuracy
- +/- 1 % - 5...5 %
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Toxic Heavy Metal Free
- Yes
- Reach Regulation
- Free of Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Reach Free Of Svhc
- Yes
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Environment
- Product Certifications
- CE || UL
- Ambient Air Temperature For Operation
- -20-55 °C
- Standards
- IEC 61010-1
- Ip Degree Of Protection
- IP40 IEC 60529 enclosure)
- Ambient Air Temperature For Storage
- -30-70 °C
- Dielectric Strength
- 4000 V between input and output
Documents
Data Sheet
DownloadRelated products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther