METSEEM4236B401

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Reach Regulation

Free of Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Reach Free Of Svhc

Yes

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

China Rohs Regulation

Product out of China RoHS scope. Substance declaration for your information.

Eu Rohs Directive

Compliant with Exemptions

Complementary

Network Frequency

50 Hz || 60 Hz

Provided Equipment

bracket for support || hook || split core current transducer 3 || fuse

Height

152.36 mm

Measurement Voltage

90-90 V AC 45...65 Hz minimum per phase || 480-480 V AC 45...65 Hz between phases || 300-300 V AC 45...65 Hz between phase and neutral

Number Of Outputs

0

Standards

EN 61010-1 || UL 61010-1 || CAN/CSA C22.2 No. 61010-1-12

Product Certifications

CE EN 61010-1 || cULus UL 61010-1 || BTL || ANSI

Communication Port Protocol

Modbus RTU 9600 bauds...115200 bauds (automatic detection) || BACnet MS/TP 9600 bauds...115200 bauds (automatic detection)

Frequency Measurement Range

45-65 Hz

Communication Of Data

remote control orders || total energy || net energy

Number Of Inputs

0

Depth

35.81 mm

Measurement Current

0-400 A

Wire Stripping Length

6 mm

Local Signalling

status LED green and red) || line fault 3 LED green, orange and red) || dial pointer indication LED Yellow) || RX/TX 2 LED green, orange and red)

Connections - Terminals

input/output plug-in connector bottom) 0.2-1.5 mm² || current transformer plug-in connector bottom) 0.2-1.5 mm² || communication plug-in connector bottom) 0.2-1.5 mm²

Function Available

external synchronisation to communication || fixed or rolling block

Mounting Mode

by screws || clip-on || by hook

Measurement Accuracy

1 %

Mounting Support

enclosure || DIN rail

Line Rated Current

400 A

Analogue Input Type

split core current transducer 0.333 V (impedance 33 kOhm) || voltage (impedance 2.5 MOhm)single phase || voltage (impedance 5 MOhm)phase to phase

Width

46.63 mm

Display Type

Without Display

Accuracy Class

class 1 ANSI C12.1 || class 1S IEC 62053-22

Metering Type

active, reactive, apparent energy (signed, four quadrant) || apparent power S, S1, S2, S3 || demand power P, Q, S || active power P, P1, P2, P3 || reactive power Q, Q1, Q2, Q3 || power factor || average current Iavg || peak demand power PM, QM, SM || frequency || voltage U21, U32, U13, V1, V2, V3

Environment

Ambient Air Temperature For Operation

-30-70 °C

Electromagnetic Compatibility

conducted and radiated emissions conforming to FCC Part 15 class A || conducted and radiated emissions conforming to EN 61000-6-4 || conducted and radiated emissions conforming to EN 61326 + A1 || immunity to conducted disturbances conforming to EN 61000-6-2 || immunity to conducted disturbances conforming to EN 61326-1 || immunity to radiated fields conforming to EN 61000-6-2 || immunity to radiated fields conforming to EN 61326-1

Pollution Degree

2

Ambient Air Temperature For Storage

-40-85 °C

Relative Humidity

0-95 %

Ip Degree Of Protection

IP20 IEC 60529

Measurement Category

category III 277-277 V || category III 300-300 V

Operating Altitude

< 9842.52 ft (3000 m)

Specifications

Product Or Component Type

energy meter

Product Name

PowerLogic EM4200

Type Of Cable

ANSI cable

Range

PowerLogic

Device Application

power monitoring

Device Short Name

Enercept

Documents