- Circle Diameter Of The Mounting Holes
- 82 mm
- Continuous Power
- 1130 W
- Maximum Mechanical Speed
- 8000 rpm
- Holding Torque
- 3 N.m
- Maximum Radial Force Fr
- 710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
- Encoder Type
- absolute multiturn SinCos Hiperface
- Mounting Support
- international standard flange
- Rotor Inertia
- 0.482 kg.cm²
- Number Of Motor Poles
- 3
- Back Emf Constant
- 48 V/krpm 20 °C
- Maximum Axial Force Fa
- 80 N
- Centring Collar Depth
- 2.5 mm
- Holding Brake
- with
- Speed Feedback Resolution
- 128 periods
- Shaft Length
- 23 mm
- Phase
- three phase
- Length
- 212.5 mm
- Net Weight
- 3 kg
- Maximum Current Irms
- 11.8 A
- Centring Collar Diameter
- 60 mm
- Stator Inductance
- 29.65 mH
- Motor Flange Size
- 70 mm
- [Us] Rated Supply Voltage
- 115...480 V
- Peak Stall Torque
- 7.6 N.m 115...480 V three phase
- Number Of Mounting Holes
- 4
- Shaft Diameter
- 11 mm
- Key Width
- 4 mm
- Nominal Output Power
- 340 W 115 V single phase || 660 W 230 V single phase || 1190 W 400 V three phase || 1360 W 480 V three phase
- Mounting Holes Diameter
- 5.5 mm
- Type Of Cooling
- natural convection
- Ip Degree Of Protection
- motor IP65 IEC 60034-5 || shaft bushing IP65 IEC 60034-5
- Shaft End
- parallel key
- Nominal Speed
- 1500 rpm 115 V single phase || 3000 rpm 230 V single phase || 6000 rpm 400 V three phase || 7200 rpm 480 V three phase
- Electrical Connection
- straight connector
- Stator Resistance
- 4.2 Ohm
- Continuous Stall Current
- 2.9 A
- Nominal Torque
- 2.15 N.m 115 V single phase || 2.1 N.m 230 V single phase || 1.8 N.m 400 V three phase || 1.8 N.m 480 V three phase
- Torque Constant
- 0.7 N.m/A 120 °C
- Continuous Stall Torque
- 2.04 N.m 115...480 V three phase