Accessories Phoenix Contact

The feed-through header, designated as DFK-PC 5/10-GF-7,62, is designed for reliable electrical connections with a nominal cross section of 6 mm² and a rated current of 41 A. The device is suitable…

The M23 Coupler connector (Designation Code: CA-07P1N129008) is designed for robust connectivity in various applications. This connector supports a cable diameter range of 10 mm to 14.5 mm and…

The coupler connector, designated as ST-3EP1N8A9K04S , is engineered for use with standard and SPEEDCON interlocks. It incorporates a straight design with 3+PE positions, utilizing pin contacts to…

The Coupler connector SF-5EP1N8A90A2 features a straight short design suitable for both standard and SPEEDCON interlocks, accommodating M23 connections. It provides a total of 5+PE positions with…

The Coupler connector ST-5ES1N8A9003S is engineered with a straight design suitable for both standard and SPEEDCON interlock applications. It features a total of 5+PE positions, ensuring versatility…

The CA-12P1N12HZ00 is an M23 device connector designed for rear wall mounting, providing a reliable solution for various signal applications. This unit is equipped with a straight design and shielded…

The feed-through header, designated as DFK-MSTBA 2,5/ 9-GF-5,08 , is designed for use in various electrical applications. It possesses a nominal cross section of 2.5 mm² and allows for a maximum…

The End Cover for 161 mm Profile Housing is tailored for use with profile housings, specifically those with an internal width of 161 mm. This component includes screws and a seal, ensuring secure and…

The ME 22,5 OT-MKDSO GN serves as the upper part of a DIN rail housing, specifically intended for PCB terminal blocks with screw connections. It measures 22.6 mm in width, 99 mm in height, and 45.85…

The PTRE 6-2/9 test terminal strip is designed for a nominal voltage of 400 V and utilizes a push-in connection method. It has a rated cross section of 6 mm², accommodating conductor cross sections…

This socket is equipped with a pin connector pattern type L and utilizes a push-in spring connection, making it suitable for various applications in Italy and other countries. It includes an extended…

The marker strip, designated as ZB 12 CUS , is engineered for integration into terminal blocks with a width of 12.2 mm. This strip is crafted from PA material, ensuring compatibility with ambient…

The UC-EM (19X9) YE snap-in markers are designed for efficient labeling in various applications. Each sheet contains 20 yellow markers that can be customized using labeling technologies such as…

The HC-STA-A16PT-BWS-HS-M25-ELCAL connector set is designed for robust applications, ensuring a high degree of protection with an IP67 rating. This set accommodates 16 positions and is constructed…

The 4-position M12 SPEEDCON connector, designated as SACC-MS-4CON-PG 7-M SCO , is designed for various universal applications. This connector utilizes a straight cable outlet and accommodates…

The FMC 1,5/ 4-ST-3,81 is a printed-circuit board connector designed for reliable electrical connections. It supports a nominal cross section of 1.5 mm² and is capable of handling a nominal current…

The PTSM 0,5/ 5-P-2,5 is a printed circuit board connector designed for reliable electrical connections in various applications. It accommodates a nominal cross-section of 0.5 mm² and can handle a…

The PST 1,0/16-3,5 pin strip features a nominal cross section of 0.5 mm² and is designed for male connector applications. This component supports up to 8 A nominal current, contingent upon the plug…

The UM-ALU 4-100,5 PROFILE 200 is characterized by its extruded profile housings made of anodized aluminum. With an external width of 105 mm and an internal width of 100.5 mm, this profile has a…

The FLT-SEC-P-T1-1C-350/25-FM is a plug-in lightning current arrester suitable for 1-phase power supply systems that utilize a combined PE and N conductor configuration (L1, PEN). It adheres to Type…