Cables & Connectivity Phoenix Contact

This DIN rail connector features a nominal cross section of 2.5 mm² and is designed to handle a nominal current of 12 A with a rated voltage of 320 V (III/2). The connector has a total of 12…

The DIN rail connector, designated as MSTBVK 2,5/21-G-5,08, is constructed for a nominal current of 12 A and operates at a rated voltage of 320 V. The connector features a green housing and a nominal…

The MTKD-E-CU/A-CU Thermoelectric Voltage Terminal Block Pair is designed for high-performance electrical connections in industrial applications. This terminal block pair is engineered to handle…

The COMBI receptacle is designed for reliable connectivity with a nominal voltage rating of 500 V and a maximum current capacity of 17.5 A. It employs a push-in connection method, facilitating…

The PTFIX 6/18X2,5-G RD distribution block is a basic terminal block with a nominal voltage rating of 450 V and a nominal current capacity of 24 A. Its design allows for bridging between blocks using…

The conductor connectors utilize QUICKON technology, facilitating rapid and secure connections for conductor sizes from 1 mm² to 2.5 mm². These connectors are designed to operate at a rated voltage…

The conductor connectors are designed for efficient connectivity with a QUICKON connection profile, supporting a configuration of 3+PE positions. These connectors are suitable for wire sizes ranging…

The QUICKON Panel Feed-Through , model QPD W 3PE1,5, is a reliable solution designed for efficient wiring. It supports up to 3 positions with an additional PE (Protective Earth) and features a…

The MSTBVK 2,5/5-STF-5,08 is a DIN rail connector designed for reliable electrical connections. With a nominal cross section of 2.5 mm², it can handle a nominal current of 12 A and a rated voltage of…

The SC 2,5-RZ/12 COMBI receptacle is designed for demanding applications, supporting a nominal voltage of 500 V and a maximum load current of 24 A . This receptacle utilizes a spring-cage connection…

This test terminal strip is suitable for a nominal voltage of 400 V and utilizes a screw connection method. It accommodates a rated cross section of 6 mm² , with a range of 0.2 mm² to 10 mm² for…

The 12X2.5 OG distribution block is designed for efficient connectivity, allowing multiple blocks to be bridged through the conductor shaft. It operates at a nominal voltage of 450 V and supports a…

This panel feed-through is designed with a push-in connection , offering a robust solution for various applications. It supports up to 2+PE positions and can accommodate cable sizes ranging from 0.5…

The SACC-DSIV-FSB-5CON-L90 SCO device connector is engineered for sensor and actuator applications, featuring a 5-position M12 SPEEDCON socket. It is designed for rear mounting, utilizing an M12…

The CA-07S1N129008 is an M23 coupler connector featuring a straight design and a shielded construction, suitable for both standard and SPEEDCON interlock configurations. This connector is equipped…

This M23 coupler connector, designated as SH-8ESS48A9LB3S, offers a straight long housing design with shielding for enhanced signal integrity. It is equipped with a total of 13 positions, comprising…

The M23 device connector is specifically engineered for front mounting applications. It features an angled rotatable design, which allows for flexible installation options. This connector supports a…

The SACC-DSIV-M12FS-5CON-L 90 device connector is specifically designed for sensor and actuator applications. It features a 5-position configuration with an A-code, allowing for secure and reliable…

The DFK-MC 1,5/2-GF-3,81 is designed for direct mounting applications, featuring a nominal cross section of 1.5 mm² and a green housing. This component supports a nominal current of 8 A and operates…

The COMBI receptacle operates with a nominal voltage of 500 V and is rated for a maximum current of 24 A . Its spring-cage connection method supports a conductor cross-section ranging from 0.08 mm²…