Proximity & Inductive Sensors Phoenix Contact

Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable, 3-way…

Master cable, application: Sensor/actuator box, connection method: M8 socket Metal, number of slots: 4, number of positions: 8, coding: A - standard, slot assignment: single, status display: No…

Bus system cable, CANopen®, DeviceNet™, 5-position, PUR halogen-free, silver-gray RAL 7001, shielded, Plug straight M12 SPEEDCON, coding: A, on Socket straight M12 SPEEDCON, coding: A, cable length…

Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered…

The PACT RCP-4000A-1A-D140 set includes a measuring transducer rated at 1 A and a Rogowski coil designed specifically for measuring AC currents in busbars and power lines. The Rogowski coil features…

The MACX MCR-TS-I-OLP is a loop-powered temperature measuring transducer that facilitates the transmission of signals from up to two sensors, including RTD and thermocouple (TC) types, as well as…

The Standard Sensor/Actuator Box Header is designed for a variety of applications. It features an M12-SPEEDCON-socket Plastic connection method, offering 8 slots and 5 positions. The coding system is…

Network cable, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, shielded (Advanced Shielding Technology), Plug straight RJ45 / IP20, on Socket straight M12 / IP67, coding: D, cable…

Consisting of a 1 A measuring transducer and a Rogowski coil with a 3 m signal line , this product, designated as PACT RCP-4000A-1A-D190 , provides precise measurements of AC current in power…

3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4) mA ... 20 mA, output signal 0(4) mA ... 20 mA. The device can be used in both isolator and repeater…

Bus system cable, CANopen®, DeviceNet™, 5-position, FRNC halogen-free, black, shielded, free cable end, on Socket straight M12, coding: A, cable length: 10 m, for outdoor applications, with…

Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 4, number of positions: 5, coding: A - standard, slot assignment: Double, status display…

The Phoenix Contact SAC-5P-MR/ 1,0-923/FS CAN SCO Bus System Cable is a versatile solution for industrial automation applications. This cable features a 5-position design with compatibility for both…

Signal Conditioner MCR-2-I4-U-PT : This product is a 3-way signal conditioner designed for the electrical isolation of analog signals. It features plug-in connection technology, ensuring easy and…

Phoenix Contact presents a robust network cable solution that combines Ethernet CAT6A and CC-Link IE CAT6A (10 Gbps) technologies for high-speed data transmission. This 8-position halogen-free cable…

Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA ‚Ķ 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can…

The EEM-MA771-EIP is a multifunctional energy measuring device designed for low-voltage environments, capable of handling voltages up to 690 V. It features a direct Rogowski connection and supports…

The EEM-EM327 is a three-phase power meter specifically engineered for the precise measurement of active power. It operates effectively in electrical networks with a voltage range of up to 500 V and…

Network cable, Ethernet CAT6A (10 Gbps), CC-Link IE CAT6A (10 Gbps), 8-position halogen-free, shielded (Advanced Shielding Technology), Plug straight M12 SPEEDCON / IP67, coding: X, on Plug straight…

4-way power supply doubler with plug-in connection technology. HART-transparent, 0(4) mA ... 20 mA input signal, 0(4) mA ... 20 mA output signals. The device can be used in both signal and power…