Terminal Blocks Phoenix Contact

Distribution block, the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories, Basic terminal block with supply, nom. voltage: 450 V…

The HDFK 4 Terminal Block is a panel feed-through terminal block designed for screw connections with tension sleeves. It offers a single position and supports up to 32 A load current with cross…

Plug-in bridge, Version with single- or double-sided cutting edge. Keep in mind the possible impact on touch protection as well as the air clearances and creepage distances. For applications in…

Distribution block, the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories, Block with vertical alignment and integrated supply, nom…

Double-level terminal block, nom. voltage: 500 V, nominal current: 32 A, connection method: Screw connection, 1st and 2nd level, Rated cross section: 4 mm², cross section: 0.2 mm² - 4 mm², mounting…

The UKH 95 1500V High-current Terminal Block is a robust solution designed for high-voltage applications. With a nominal voltage of 1500 V and a nominal current capacity of 232 A, it offers reliable…

Feed-through terminal block, nom. voltage: 1000 V, nominal current: 41 A, connection method: Push-in connection, Rated cross section: 6 mm², cross section: 0.5 mm² - 10 mm², mounting type: NS 35/7,5…

The PTFIX distribution block is designed for reliable power distribution in electrical systems. It offers a nominal voltage of 450 V and a nominal current capacity of 32 A, making it suitable for…

The Terminal Block Marker - UC1-TM 8 YE CUS is designed to be ordered by sheet, yellow, and labeled according to customer specifications. This marker is specifically tailored for terminal blocks with…

Installation ground terminal block, nom. voltage: 400 V, nominal current: 24 A, Screw connection, 1st, 2nd and 3rd level, Rated cross section: 4 mm², cross section: 0.2 mm² - 4 mm², mounting type: NS…

Product Overview: The Phoenix Contact UKK 3-MSTB-5,08-F is a double-level terminal block designed for MSTB flange plug screw connections. This terminal block features a pitch of 5.08 mm and is…

Distribution block, the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories, Block with vertical alignment, nom. voltage: 690 V, nominal…

The UTWE 6/3+1 Terminal Strip is an essential component for electrical installations. It is designed to handle a nominal voltage of 400 V and a nominal current of 24 A, making it suitable for a wide…

The PTFIX 6X2.5-NS15A-FE Distribution Block is an integral part of any electrical system, designed for efficient distribution of power. It boasts a horizontal alignment that allows it to be bridged…

The UT 35-PE is a high-quality ground modular terminal block designed for reliable electrical connections. It features two connections, ensuring efficient power distribution. The connection method is…

The PTFIX Distribution Block is a versatile electrical component designed to facilitate the distribution of power in industrial settings. With a nominal voltage of 450 V and a nominal current…

Introducing the Terminal Block Marker - UC-TMF 16 RD CUS, a versatile solution designed to enhance your electrical system's organization and identification. This marker is not just a label; it's a…

The Marking Foil for Zack Marker Strip - TML (104X10)R is a premium quality product designed to provide efficient and reliable marking solutions. This foil roll offers a white, unlabeled surface that…

Knife disconnect terminal block, nom. voltage: 400 V, nominal current: 20 A, connection method: Screw connection, Rated cross section: 2.5 mm², cross section: 0.14 mm² - 4 mm², mounting: NS 35/7,5…

Product Overview: The PT 2.5-TWIN-MTB BU is a high-quality Push-in Knife Disconnect Terminal Block designed for industrial and automation applications. With a nominal voltage of 400 V and a nominal…