Tools & Accessories Phoenix Contact

The CRIMPFOX-SC 6L crimping pliers are specifically tailored for use with non-insulated slip-on sleeves sized at 2.8 mm, 4.8 mm, and 6.3 mm. These pliers feature three clearly marked die stations…

This Contact insert is designed for use in D25 size housings, specifically compatible with the HC-D25 and HC-D50 series. With a total of 16+PE positions , each position accommodates one connection…

The coupler connector ST-3ES1N8A9K03S is designed for both standard and SPEEDCON interlocking applications. It features a straight configuration with 3+PE positions and a socket type contact. This…

The PT 4-BE serves as a base element for a protective plug, specifically configured to manage a 4-wire floating signal circuit. It establishes a connection bridge between terminals 3-4 (GND) and…

The UMKS- F48M-VR is a VARIOFACE module tailored for use with IEC 603/DIN 41612 connectors, specifically type F. This module accommodates 48 positions and is equipped with a male connector and cable…

This plug, designated as UPBV 4/ 4 NZ:1 , operates at a nominal voltage of 800 V and supports a maximum load current of 32 A when using a conductor cross-section of 6 mm². It is designed with 4…

The TTC-6-1X2-M-EX-24DC-UT-I is a surge protection device suitable for a 2-wire floating Ex i signal circuit, specifically designed for applications involving 0(4) ... 20 mA current loops and HART…

The ME 22,5 UT TBUS GN is a DIN rail housing characterized by its tall design and integrated vents. This lower housing part, with a width of 22.6 mm, height of 99 mm, and depth of 107.3 mm, is…

The front adapter, designated as FLK 40-PA/EZ-DR/HF/KS/ 200/YUC , is constructed from cast material and includes an attached halogen-free round cable. It provides a 40-position socket strip that is…

The UTWE 6-2/8 is a test terminal strip with a nominal voltage of 400 V, suitable for wall mounting. It employs a screw connection method and supports a rated cross section of 6 mm², accommodating…

Plastic label, Roll, silver, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive…

The PP-H 6/1-R OG plug is designed for self-assembly applications, supporting a nominal voltage of 1000 V and a nominal current rating of 41 A. This component utilizes a push-in connection method…

The SPB 2,5/ 1-L BU plug is designed for applications requiring a nominal voltage of 500 V and supports a maximum load current of 24 A with a 4 mm² conductor cross-section. This component features a…

The S-PT-4-EX-24DC-1/2" surge protection device is engineered for two-stage protection of three or four signals within floating signal circuits. This module is constructed with an IP67 degree of…

The M23 device connector front mounting, designated as CA-07P1N126Z00, is engineered for reliable signal connections with a configuration of 7 pins. This connector is straight and shielded, ensuring…

The Coupler connector with designation code SB-8ESCD8A9L34S is engineered for robust connectivity in demanding environments. Designed with an M40 thread type, this connector features a straight long…

The contact insert with designation code HC-A03-I-PT-M features a connection configuration of 3+PE, making it suitable for various applications. This insert is designed to fit into an HC-D7 housing…

The LS-EMSP-V4A (140X100) 1 is a device marker crafted from stainless steel, designed for durability and functionality. This silver-colored label is unlabeled and can be personalized using TOPMARK…

The EH 52,5-C SS/ABS-PC BK9005 serves as the upper section of a DIN rail housing, characterized by its tall design and a single connection opening. With precise dimensions of 52.6 mm width , 75 mm…

The SACC-DSIV-FS-8CON-L90 SH SCO is designed for reliable connections in sensor and actuator applications. It incorporates a 5-position M12 SPEEDCON configuration, ensuring secure rear/screw mounting…