#1 Conferencia para el comercio de automatización industrial| 16-18 de junio de 2025| Hilton Warsaw City, Varsovia, PoloniaAprender más
Filtros
Actualmente está buscando productos exclusivamente relacionados con Warner Electric. Si desea explorar todos los productos disponibles, utilice nuestra búsqueda de productos
This Electro Disk Brake Replacement Part (5216-101-028) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-101-028) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-631-010) features a MTB II Magnet.
This Electro Disk Brake Replacement Part (5216-631-010) features a MTB II Magnet.
The CBC-100 and CBC-150 series are UL listed, conduit box mounted controls for 90 volt clutches and brakes. Models are available for either 120 VAC or 220/240 VAC input. These On - Off Controls (6003-448-103) Product Series Feature 1 channels, and an input of 220/240 VAC, 50/60 Hz.
The CBC-100 and CBC-150 series are UL listed, conduit box mounted controls for 90 volt clutches and brakes. Models are available for either 120 VAC or 220/240 VAC input. These On - Off Controls (6003-448-103) Product Series Feature 1 channels, and an input of 220/240 VAC, 50/60 Hz.
The TCS-605-5 pivot point sensor closes the feed back loop to the tension control by sensing dancer roll position. This device is a five-turn potentiometer with a resistance of 1KΩ for festooned dancer systems, with a 300° rotational range.
The TCS-605-5 pivot point sensor closes the feed back loop to the tension control by sensing dancer roll position. This device is a five-turn potentiometer with a resistance of 1KΩ for festooned dancer systems, with a 300° rotational range.
This Electro Disk Brake Replacement Part (5216-631-004) features an Old Style Magnet.
This Electro Disk Brake Replacement Part (5216-631-004) features an Old Style Magnet.
Warner Electric ERS Brakes are pre-assembled and burnished at the factory. The engineering is built-in. Each unit is checked to ensure full rated torque right out-of-the-box. Just secure the hub, bolt down the brake and wire it up. This brake (5155-170-002) features a 24 DC voltage, a 15 ft-lb static torque, and a max. speed of 3600 RPM.
Warner Electric ERS Brakes are pre-assembled and burnished at the factory. The engineering is built-in. Each unit is checked to ensure full rated torque right out-of-the-box. Just secure the hub, bolt down the brake and wire it up. This brake (5155-170-002) features a 24 DC voltage, a 15 ft-lb static torque, and a max. speed of 3600 RPM.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (305-17-007) features a bore size of 0.5 in and a 115 VAC voltage.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (305-17-007) features a bore size of 0.5 in and a 115 VAC voltage.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (316-17-005) features a bore size of 20 mm and a 24 VDC voltage.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (316-17-005) features a bore size of 20 mm and a 24 VDC voltage.
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 volt clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These On - Off Controls (6001-448-004) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 volt clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These On - Off Controls (6001-448-004) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
This Electro Disk Brake Replacement Part (5216-101-003) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-101-003) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-101-025) features 10 inch MTB II Armature.
This Electro Disk Brake Replacement Part (5216-101-025) features 10 inch MTB II Armature.
The MCS-103-1 is an enclosed control complete with a cover and mounting provisions. A brake and clutch may be operated separately with this control — or up to four units, two at a time. The external wiring is connected to the terminal strip located behind the cover. These Adjustable Torque Controls (6010-448-002) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
The MCS-103-1 is an enclosed control complete with a cover and mounting provisions. A brake and clutch may be operated separately with this control — or up to four units, two at a time. The external wiring is connected to the terminal strip located behind the cover. These Adjustable Torque Controls (6010-448-002) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
