Automation Sensors

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The Universal Transmitter PR 4116 is designed for linearized, electronic temperature measurement using RTD or TC sensors. It converts linear resistance variations into standard analog current or voltage signals, making it ideal for applications involving solenoids, butterfly valves, or linear movements with potentiometers. This versatile device also functions as a power supply and signal isolator for 2-wire transmitters, and supports process control with two pairs of potential-free relay contacts and an analog output.Featuring galvanic separation of analog signals, the PR 4116 ensures accurate measurement of floating signals. It meets the stringent requirements for SIL 2 applications as per IEC 61508 / IEC 61511, and its failure rates correspond to Performance Level “d” according to ISO-13849. When used with the PR 4500 display series, all operational parameters can be easily modified without opening the device, thanks to its electronic hardware switches.The PR 4116 is equipped with a green/red front LED to indicate normal operation and malfunction, and a yellow LED for each active output relay. It continuously checks vital stored data for safety reasons and offers 4-port 2.3 kVAC galvanic isolation. Its low power consumption allows for side-by-side mounting without an air gap, even at ambient temperatures up to 60°C. Configuration, monitoring, and calibration are simplified using PR's 4500 series of detachable displays, with all programming options password-protected.With inputs for RTD, TC, Ohm, potentiometer, mA, and V, and outputs for current, voltage, and relays, the PR 4116 is a highly adaptable solution for various industrial applications. It is FM-approved for installation in Div. 2 environments and supports universal AC or DC supply.

The Omron TL-W1R5MB1 2M Flat Inductive Proximity Sensor is designed for precise and reliable detection of ferrous metals. With a compact sensing head size of 8 mm x 5.5 mm x 25 mm, this unshielded sensor offers a sensing distance of 1.5 mm ±10%, making it ideal for various industrial applications. The sensor operates on a DC three-wire model and features a PNP open collector output with a NO operation mode. The 2-meter pre-wired cable ensures easy installation and flexibility in mounting.Engineered to withstand harsh environments, the TL-W1R5MB1 is equipped with reverse polarity protection and a surge suppressor. It boasts an IP67 protection rating, ensuring resistance to dust and water ingress. The sensor is also oil-proof, making it suitable for use in demanding industrial settings. The robust construction includes a heat-resistant ABS resin case and sensing surface, ensuring durability and longevity.The sensor operates within a wide temperature range of -25 to 70°C and can handle ambient humidity levels of 35 to 95%. It features a high response frequency of 1 kHz, ensuring quick and accurate detection. The TL-W1R5MB1 is compliant with international standards, providing reliable performance and safety in various applications.

The Baumer Diffuse Sensor OHDK 14P5101/S35A is engineered for accurate object detection with its advanced background suppression technology. This sensor features a pulsed red laser diode for reliable performance over a sensing range of 20 to 350 mm. Designed for industrial environments, it offers robust operation with an IP67 protection rating, ensuring durability in harsh conditions. The sensor's PNP output and 9-turn mechanical adjustment provide flexibility and ease of integration. With a compact M8 4-pin connector, installation is straightforward, making it ideal for a variety of automation tasks. Operating efficiently in temperatures ranging from -10 to 50 °C, this sensor is a versatile solution for precise and reliable detection needs.

PF2A7 is a digital flow sensor compatible with air and nitrogen. This is a legacy sensor, with refreshed feature sets offered by the newer PFMB and PFMC sensors. The 3-digit LED display can show either instantaneous or accumulated flow. The mounting bracket is integrated into the body, while the M12 lead wire is optional. 2 switch outputs are included, with an LED indicator for each located below the display. PF2A is IP65 rated, and CE and RoHS compliant.

Trimmer auto switches can detect various size work pieces by the difference of more than 0.5mm. The sensor enclosure is rated IP67 and the amplifier is IP40. Trimmer switches are available in direct or rail mounting styles. The sensor and amplifier can be connected without restriction through the use of an e-con connector.

Trimmer auto switches can detect various size work pieces by the difference of more than 0.5mm. The sensor enclosure is rated IP67 and the amplifier is IP40. Trimmer switches are available in direct or rail mounting styles. The sensor and amplifier can be connected without restriction through the use of an e-con connector.

The XS series of inductive proximity sensors offers an effective solution for detecting metal objects without physical contact, making it ideal for hazardous environments with dust. The sensor's non-contact detection capability ensures robustness and longevity, even when dealing with fragile or freshly painted objects. It boasts high operating rates and a fast response time, ensuring reliable performance in industrial settings. This product is a cylindrical, long case, flush mountable sensor with a diameter of 18mm and a threaded M18 x 1. Constructed from nickel plated brass, it is fully encapsulated in resin for enhanced resistance to harsh industrial environments. The sensor features a sensing distance of 4mm and a three-wire, DC supply, operating at 12V to 48V, with a NO function, PNP discrete output. This inductive proximity sensor complies with the ATEX directives, ensuring compliance with safety regulations for hazardous areas. The product comes with a 10m long PvR cable, providing flexibility and ease of installation.

Our fork sensors with transmitter and receiver in one housing are easily adjusted. That reduces your expense, saves valuable time during start-up and supports reliable processes. When it comes to precision, Balluff's fork sensors are unrivaled. Our comprehensive portfolio provides reliable solutions. Also for special applications like transparency recognition, water detection and web edge control.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our cylinder sensors for round cylinders are integrated into different applications with the appropriate hose clamp and mounting bracket. The mounting bracket concept is suitable for most types of cylinders up to 80 mm piston diameter. Features: contact-free detection of the piston position through the cylinder wall, precise switching point, wear-free, resistant to dirt, secure grip, fast installation.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The SIMATIC RF1040R Access Control Reader is a robust and reliable device designed for secure access control applications. It supports a wide range of frequencies including LF 125 kHz, HITAG 1/2/S, EM41xx, HF, ISO 14443 A/B, and ISO15693. This reader is equipped with a USB port that also provides RS 232 interface for easy integration into various systems. It boasts an IP65 rating, ensuring it can operate in harsh environmental conditions. The temperature range of -25 to +55 °C makes it suitable for use in both cold and hot environments. With dimensions of 90 x 62 x 25 mm, it is compact and easy to mount. The reader comes with an integrated antenna and a 1.8 m USB connecting cable, making it ready for immediate use. Its robust design and advanced features make the SIMATIC RF1040R Access Control Reader an ideal choice for secure access control systems.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.