Contactors & Relays

The AF65-30-00-13 is a versatile contactor designed to manage large control voltage variations. It features a wide control voltage range of 100-250V 50/60 Hz and DC, making it suitable for unstable networks. This contactor is capable of controlling motors up to 30 kW / 400 V AC (AC-3) or 50 hp / 480 V UL and switching power circuits up to 105 A (AC-1) or 90 A UL general use. It has a block type design, allowing for easy extension with add-on auxiliary contact blocks and a wide range of accessories. Key Features: Wide control voltage range: 100-250V 50/60 Hz and DC Suitable for unstable networks Can control motors up to 30 kW / 400 V AC (AC-3) or 50 hp / 480 V UL Switching power circuits up to 105 A (AC-1) or 90 A UL general use Compact design with built-in surge protection

The SIRIUS advanced safety relay is a high-quality electronic device designed for enabling circuits in various applications. It features three normally open contacts and one normally closed contact, along with a relay signaling circuit. This unit operates at 24V DC and is equipped with a spring-loaded terminal for easy connection.

The Siemens Power Contactor S10 is designed for AC-3 operation, offering a rating of 225A and a power capacity of 110kW at 400V. This contactor features auxiliary contacts with 2 NO + 2 NC, making it suitable for a wide range of applications. It comes with a frame size of S10 and busbar connections for conventional operation. The operating mechanism is spring-loaded, ensuring reliable and efficient performance.

The NF22E-13 100-250V50/60HZ-DC Contactor Relay by ABB is designed for efficient switching of auxiliary and control circuits. Featuring an electronic coil interface, it accepts a wide control voltage range from 24 to 500 V 50/60 Hz or 20 to 500 V DC, making it adaptable to various control voltages worldwide without the need for coil changes. This relay is equipped with built-in surge protection, eliminating the need for additional surge suppressors.Key Features:4-pole contactor relays with mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1AC or DC operated control circuitWide control voltage range (24-500 V 50/60 Hz or 20-500 V DC)Built-in surge protectionCompatible with a wide range of accessoriesApplications:Ideal for switching auxiliary and control circuits in various industrial applications, ensuring reliable performance and adaptability to different control voltages globally.

The CM-PAS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.41S monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The AC Power Contactor, model AC-3, is designed to handle high power applications, with a rating of 7.5kW at 400V. This contactor features 2 normally open (NO) and 2 normally closed (NC) contacts, making it suitable for various switching tasks. It operates at 230V AC, 50Hz, with a 3-pole design, ensuring reliable performance in diverse environments.The contactor comes with a removable auxiliary switch, enhancing its versatility. It is available in Size S0, offering flexibility in installation and use. The screw terminal design allows for easy connection of wires, further simplifying the installation process.

The CT-ARE is a single-function electronic time relay from the CT-E timer range. It provides an OFF-delay (true delay on break) function without auxiliary voltage and with a time range from 0.1 s to 10 s. This time relay operates with a rated control supply voltage of 110 - 130 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A.

The SE Relays 750R series, plug-in general purpose relay offeres robust and historically proven octal style mounting relay platform that provides excellent structural support with hermetically sealed for wash down conditions cover compliant with UL Class I Division 2 for Hazardous Locations Groups A, B, C, and D. Contacts rated as 12A resistive at 120VAC/240VAC, 1/3hp at 120VAC, 1hp at 277VAC with nominal coil voltage 120VAC , make relay to be an ideal choice for automation panels and controls. Silver alloy contact 3PDT configuration reduces oxidation and increases shelf life, gives simultaneous control of separate circuits. Socket-mounting option simplified installation and maintenance and using of protection modules, hold-down clips, and other accessories. Mechanical standard flag indicator displays the relay status during testing or operation.

Temperature Monitoring Relay SIMIREL Conversion Type= Digital deg. C Number of Sensors = 2 Sensor Type = (Sel-PT100/1000;KTY83/84;NTC) Function = (Sel-Over/Under/Window Monitor) Measurinng Range = -50+750 Control Voltage = 24VUC Spring

The Siemens S6 Contactors are designed for a wide range of applications in the power industry. With a rating of 115A and an operating voltage of 200-220V AC/DC, these contactors can handle high power loads up to 55 kW at 400 V AC (50-60 Hz) / DC operation.The Siemens S6 Contactors feature auxiliary contacts with 2 NO + 2 NC for added functionality and flexibility. These contactors are available in a 3-pole configuration, making them suitable for various applications where multiple phases or circuits need to be controlled.The Siemens S6 Contactors come with box terminals for easy installation and maintenance. The conventional operating mechanism ensures reliable and efficient operation of the contactor, while the screw terminal design allows for quick and secure connection of wires.

The Complete Unit 24VDC Plug-in Relay is designed to provide efficient and reliable control of your electrical systems. This unit features a 3W output at 24V DC, ensuring that it can handle the demands of even the most power-intensive applications.The relay also comes equipped with an LED module in red color. This not only allows for easy identification but also provides a clear visual indication of the relay's status. The LED module is standard and screw terminal, making it easy to install and maintain.This unit is compatible with a standard plug-in socket, which measures 3.5 mm in pinning. This ensures that it can be easily integrated into your existing electrical systems.

The Siemens SIMATIC DS1-X direct starter for ET 200S is designed for industrial motor control applications where compact integration and dependable switching performance are required. It supports direct starting and is suitable for brake control module applications, making it a practical choice for automation systems that need coordinated motor and braking functions. The expandable electromechanical design helps adapt the solution to machine requirements while maintaining a straightforward installation concept.This starter offers short-circuit protection and is intended for use in demanding industrial environments with high EMC expectations. Its coordination category and rugged construction support reliable operation in control cabinets and distributed automation setups. The unit is engineered for maintenance-friendly operation and stable performance in AC motor circuits, helping engineers and integrators implement compact motor-starter solutions with Siemens quality.

Temperature monitoring relay CM-TCS.13S: temperature range 0..+200°C, width 25 mm, adjustable by potentiometer, 1 temperature sensor, 2 thresholds, overtemperature, undertemperature, window monitoring, rated control supply voltage 24-240 V AC / DC, 2 c/o, screw connection terminals

TeSys LRD thermal overload relay, 4A/690V, thermal setting range 2.5-4A, tripping class 10A, for protection of 3-phase motors 1.1-1.5kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

The TeSys Giga high power contactor is designed for demanding applications, offering a maximum operating rate of up to 600 cycles per hour and an operating ambient air temperature range from -25°C to 60°C. This compact device measures 255mm x 108mm x 175mm (H x W x D) and is certified under multiple standards, including CE, CB, CCC, cULus, EAC, KC, RCM, and Marine. It also complies with the Green Premium standard for RoHS/Reach. The contactor features a 100-250V AC/DC wide band low consumption electronic coil and an embedded highly reliable 1NO+1NC auxiliary contact block, providing continuous monitoring with healthy and alarm indicators. It also includes a local Contact Wear Diagnosis (CWD) as a standard function. The TeSys Giga high power contactor can be fixed in all quadrants, allowing for maintenance without removing cables/busbars. It is designed to replace the switching module (main contacts), enhancing the contactor's life. The device provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. The contactor can be used with power connection by bolted connection and control connections by spring terminals, accessible from the front for easy and quick replacement. It is also possible to mount the OLR directly below the contactor. The device is Green Premium compliant (RoHS/Reach) and features a unique QR code for quick access to complete product data.

This temperature monitoring relay is designed to handle a wide range of temperatures from -58°F to 932°F. It supports multiple sensor types including PT100/1000, KTY83/84, and NTC sensors. The relay features adjustable thresholds for over, under, or window monitoring. It operates on a control voltage of 24-240V AC/DC and comes with screw terminals for easy installation. Please note that this product is no longer in production, and the recommended successor is the 3RS2600-1BW30.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 208 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The CT-AWE is a single-function electronic time relay from the CT-E timer range. It provides an impulse-OFF (trailing edge interval) function with a time range from 0.3 s to 30 s. This time relay operates with a rated control supply voltage of 220 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A. A control input works with voltage-related (non-floating) triggering.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.