Drives & Motors

The SIRIUS soft starter is an advanced solution designed to meet the needs of demanding industrial applications. With a capacity of up to 400 V and 40 °C standard, it offers a robust performance with a maximum current rating of 693 A and power handling capability of 400 kW. The soft starter is equipped with screw terminals for easy installation and maintenance.For applications requiring higher power demands, the SIRIUS soft starter also offers an Inside-delta configuration. This configuration provides a maximum current rating of 1200 A and power handling capability of 710 kW, making it suitable for 200-460 V AC and 230 V AC applications.The SIRIUS soft starter is a phased-out product. The preferred successor type is the SIRIUS 3RW5. For more information on the successor, please refer to the model >>3RW5553-6HA14

The softstarter PSE105-600-70 is designed for a rated maximum operational current of 105 A, with an operating voltage range spanning from 208 to 600 V AC. It features a two-phase control system that allows for a soft start and stop through a voltage or torque ramp. The device includes built-in bypass for easy installation and energy savings. It also provides a relay output with RUN, TOR, and Event signals in the NO state. The PSE105-600-70 offers functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. The device is equipped with an illuminated display that uses symbols for language neutrality. As an option, you can add an identical external keypad rated at IP66. Communication with the PSE105-600-70 can be achieved through hardwire inputs Start/Stop or by Reset of fault. It also supports built-in fieldbus communication Modbus RTU and can use an external adaptor and a Fieldbus plug. The softstarter is a versatile solution suitable for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. Common applications include pumps, fans, compressors, and conveyors.

SINAMICS G120C RATED POWER 0,55KW WITH 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ INTEGRATED FILTER CLASS A I/O-INTERFACE: 6DI, 2DO,1AI,1AO SAFE TORQUE OFF INTEGRATED FIELDBUS: PROFIBUS-DP PROTECTION: IP20/ UL OPEN TYPE SIZE: FSA 196X73X203(HXWXD) EXTERNAL 24V

Square D 2510K motor starting switches provide compact manual On Off control of single or three phase motors or resistance heating loads up to 600 VAC, where overload protection is not required or provided separately. Open type fits industry standard single-gang switch boxes for direct mounting in a wall or machine using any standard cover plate with a standard single cutout. Pilot light option is available. A variety of enclosures are available. Units are UL Listed and CSA Certified for global applications. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This NEMA 1 general purpose enclosure is a surface mounting enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. The enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. It weighs 0.84 lb. This device is UL Listed and CSA certified.

The softstarter PSR85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

The Sinamics S120 Double Motor Module is designed for high performance applications requiring double input DC 600V motor modules with an output of 3-PH 400V, 9A/9A. It features a compact booksize internal air cooling system optimized for pulse sample and support of the extended safety integrated functions including DRIVE-CLIQ Cable.This module is designed to provide reliable performance in demanding industrial environments. Its robust design and advanced features make it an ideal choice for applications where high precision, fast response times, and low power consumption are required.

The ABB PSR37-600-70 is a compact, reliable solution for managing the start and stop of small three-phase motors. With a rated maximum operational current of 37 A, it can handle a wide range of voltages from 208 V to 600 V AC.This softstarter features a two-phase control soft start and stop through a voltage ramp, ensuring smooth transitions and energy efficiency. It also includes a built-in bypass for easy installation and a relay output for RUN and TOR signals in the NO state. The start/stop ramp and time can be easily set using three potentiometers on the front.The ABB PSR37-600-70 is often used in combination with a manual motor starter (MMS) from ABB, and mechanical connection kits are available for this purpose. Alternatively, Fieldbus communication can be enabled by an external adaptor and a Fieldbus plug.This softstarter range is suitable for small three-phase motors with nominal currents from 3 to 105 A and can manage up to 100 starts per hour. Common applications include pumps, fans, compressors, and conveyors.

The PSR105-600-70 Softstarter has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

Key Features The MS325-25 manual motor starter by ABB is a 54 mm width device with a rated operational current of Ie = 25 A. This manual motor starter is designed to switch on and off motors and protect them from short-circuits, overload, and phase failures without the need for a fuse. It offers a rated service short-circuit breaking capacity of Ics = 50 kA at 400 VAC and trip class 10A. Additional Features The manual motor starter comes with built-in disconnect function, temperature compensation, trip-free mechanism, and a rotary handle with clear switch position indication. It is suitable for three- and single-phase applications. Accessories include auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks, and locking devices for protection against unauthorized changes.

SINAMICS g110d AC-drive, with repair switch with built in cl. a filter with bult in braking chopper with as-interface bus interface 3AC380-500v +10/-10% 47-63HZ output high overload 7,5KW for 200% 3s,150% 60s,100% 300s ambient temp -10 to +40 deg c 210 x 450 x 240 (hxwxd), fsc protection IP65 without operator panel

The PSE25-600-70 softstarter is engineered to handle a wide range of applications, offering a rated maximum operational current of 25 A and an operating voltage span from 208 V AC up to 600 V AC. This device features a two-phase control with a soft start and stop through a voltage or torque ramp, ensuring smooth operation and energy efficiency. The PSE25-600-70 is equipped with built-in bypass for easy installation and offers various protection functions such as current limit, kickstart, analog output, end of life (EOL), underload, and locked rotor protection. It also provides a RUN, TOR, and Event signal from a relay output in NO state. To enhance user interaction, the PSE25-600-70 incorporates an illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66 for added convenience. Communication options with the PSE25-600-70 include hardwire inputs Start/Stop or Reset of fault, built-in fieldbus communication Modbus RTU, and an external adaptor and Fieldbus plug. This softstarter is a true general-purpose solution, offering a perfect balance between high starting capacity and cost efficiency.

SINAMICS G120 POWER MODULE PM230 WITH BUILT IN CL. A FILTER PROTECTION IP20 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 22KW FOR 110% 60S,100% 240S AMBIENT TEMP 0 TO +40 DEG C(LO) 419 X 275 X 204 (HXWXD), FSD WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU240B/E-2 AND CU230P-2 FIRMWARE-VERSION V4.4 NOTE: PM230 DOES NOT SUPPORT SAFETY

Product Overview The HALL SENSOR BOX is a specialized component designed for use in the automation industry. It features a straight cable outlet, providing a clean and efficient design. This product is compatible with series 050 to 200 and is suitable for commuting applications. Technical Specifications The HALL SENSOR BOX comes in two primary unit lengths: 2 and 4. It also includes a straight cable polarization determination feature, enhancing its functionality and versatility.

The Siemens SINAMICS S210 is a high-performance servo drive system designed to provide precise motion control for a wide range of industrial applications. This versatile drive system is ideal for tasks requiring high dynamics and accuracy, such as packaging machines, handling systems, and machine tools.Key Features:Advanced servo control with output frequency up to 550 HzRobust design with IP20 protectionSupports PROFINET communicationWide input voltage range (200-480V)Integrated air cooling systemPerfect for:Packaging machinesHandling systemsMachine toolsAutomation systems

The Siemens SINAMICS S210 Servo Converter is a top-tier solution for precise motor control in various industrial applications. Designed to handle an input voltage range of 200-480 V 3AC with a tolerance of -10% to +10%, this servo converter ensures reliable performance under diverse conditions. It operates at a frequency range of 45-66 Hz and provides an output voltage of 0 input V with a current of 7.0 A, supporting motors up to 2.0 kW.Key Features:Input voltage: 200-480 V 3ACOutput current: 7.0 AMotor power: 2.0 kWFrequency range: 0-550 HzDegree of protection: IP20Compact frame size: 70 x 322 x 223 mm (WxHxD)With its IP20 protection class, the SINAMICS S210 is safeguarded against solid objects and offers a robust solution for industrial environments. The compact frame size (70 x 322 x 223 mm) ensures easy integration into existing systems without requiring significant space.ApplicationsIdeal for applications requiring precise motor control, such as:Automation systemsPackaging machineryMaterial handling equipmentTextile machineryCompliance with the latest RoHS directive and other environmental standards ensures that the SINAMICS S210 is an eco-friendly choice for modern industries. Its active product lifecycle status (PM300) guarantees ongoing support and availability.

The Omron 3G3MX2-A4007-E is a sophisticated three-phase inverter designed for precise motor control applications. It provides smooth operation down to zero speed and precise cyclic and torque control in open loop, eliminating the need for an encoder. This inverter supports both induction and synchronous motors, making it highly versatile for various industrial applications.Key features include current vector control for high starting torque (200% at 0.5 Hz), dual rating for heavy-duty (120% for 1 minute) and normal-duty (150% for 1 minute) operations, and built-in logic programming capabilities. The inverter also offers positioning functionality and brake control, enhancing its utility in complex automation systems.For communication, the 3G3MX2-A4007-E supports multiple fieldbus options including EtherCAT, Modbus, DeviceNet, Profibus, CompoNet, MECHATROLINK-II, and EtherNet/IP. It is equipped with a USB port for easy PC programming and a 24 VDC backup supply for the control board, ensuring reliable operation even during power interruptions.Compliant with ISO13849-1 safety standards, the inverter includes double input circuits and an external device monitor (EDM) for enhanced safety. The compact design (108mm x 128mm x 171mm) and lightweight (1.6kg) make it easy to integrate into existing systems.

The Omron JX Series Frequency Inverter is a high-performance solution designed for precise motor control in various industrial applications. With a power rating of 0.4 kW, this inverter is suitable for single-phase 230V systems and supports a wide output frequency range of 0.5 to 400Hz. The compact design ensures easy integration into existing setups, while the integrated ModBus communication port facilitates seamless network connectivity.Key Features:Supports a wide output frequency range of 0.5 to 400HzIntegrated ModBus RTU communication for network connectivityBuilt-in CE filter for enhanced electromagnetic compatibilityMulti-level speed settings with up to 16 levelsPID control for precise motor speed regulation100% rated torque from 6HzComprehensive protection features including overcurrent, overvoltage, short circuit, and overheating protectionThis inverter is ideal for applications requiring reliable and efficient motor control, such as conveyors, fans, pumps, and other machinery. Its robust design and advanced features ensure long-term performance and reliability, making it a valuable addition to any industrial automation setup.

The Omron 3G3MX2-A4015-E MX2 Inverter Drive is designed for seamless integration into a wide range of industrial automation systems. This high-performance drive offers precise motor control with sensorless vector technology, making it ideal for applications requiring high torque and dynamic response. With a power rating of 1.5 kW (HD) and 2.2 kW (ND), and a maximum output frequency of 580Hz, it ensures optimal performance and energy efficiency.The MX2 series is known for its robust design and reliability, featuring a three-phase 400 VAC power supply. It supports various motor types and provides advanced functionalities such as torque control, positioning, and safety features. The drive is compliant with international standards, ensuring compatibility and safety in diverse industrial environments.Applications include conveyors, fans, pumps, and other machinery where precise speed and torque control are critical. The compact design and user-friendly interface make installation and operation straightforward, reducing downtime and maintenance costs.

The Siemens SIMOVERT P Transistor Pulse Converter is a high-performance, open-chassis unit designed for efficient power management in industrial settings. With its robust construction and advanced technology, this converter ensures reliable operation and optimal performance.Key Features:Open-chassis design for easy integrationIP20 protection ratingOperates on 1-phase AC 220/240V, 50/60Hz0.7KVA power capacityIdeal for:Industrial automationPower management systemsManufacturing plants

The SEW-Eurodrive MOVITRAC 31C Inverter is designed to provide efficient and precise motor control for a wide range of industrial applications. With its robust construction and advanced features, this inverter ensures reliable performance and energy savings.Key Features:Input voltage: 3 x 380-500 VAC +/-10%Output power: 2.8 kVAContinuous output current: 5.0 AMotor power: 1.5 kWCompact dimensions: 105 x 188 x 189 mmLightweight: 2.5 kgPerfect for:Manufacturing plantsAutomated production linesMaterial handling systems