Electronics & PCBs

SCALANCE X202-2PIRT PRO,Managed IE IRT switch, Degreeof protection IP65/67, 2x10/100 Mbit/s Push Pull RJ45ports, 2x 100 Mbit/s Push- pullSCRJ port; Error signalingcontact with set pushbutton,Redundant power supply,PROFINET IO device; networkmanagement, Redundancy Managerintegrated, incl. electron.manual on CD-ROM, C-plugoptional.

TeSys F contactor, 3 poles (3NO), 400A/1000V AC-3, for motor applications up to 200kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Schneider Electric's TeSys D contactors are designed to seamlessly integrate into control systems, serving as the backbone for a wide array of applications. These contactors are available in 13 different ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. The 80A inductive 3 pole IEC contactor is a robust choice for your control system. It can be mounted on DIN rail or directly onto a panel, offering flexibility in installation. The contactor boasts both Horsepower and Kw motor ratings for international acceptance. This specific model is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC, and 60HP at 600VAC in three-phase applications. For single-phase applications, it is rated for 7.5HP at 115VAC and 15HP at 240VAC. When paired with a 480VAC up to 150A circuit breaker or an up to 600VAC 175A Class J or CC fuse, this contactor can handle Short Circuit Current Ratings (SCCR) of up to 100kA. The contactor comes with a 72 VDC coil and a transient suppressor module for enhanced performance. The contactor features one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified, ensuring reliable operation. Screw clamp terminals are used for load and auxiliary connections, providing secure and efficient wiring. With an extensive line of accessories, this contactor can meet the requirements of most applications. It measures 5.00 inches in height, 3.35 inches in width, and 7.32 inches in depth, weighing 5.71 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various environments. Additionally, this contactor meets the requirements of RoHS/REACh, positioning it as a Green Premium product. Schneider Electric's commitment to sustainability is evident in every aspect of their products.

This TeSys D contactor has been designed for motor control in railway applications. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200 to 208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product. Contactor is also compliant with the railway European standard EN 45545 R22HL3.

The AF305-40-11-13 is a robust contactor designed for controlling motors up to 160 kW / 400 V AC and switching power circuits up to 500 A (AC-1) or 350 A UL general use. This 4 pole device features pre-mounted auxiliary contacts and Main Circuit Bars, making it versatile for a wide range of applications.The AF technology incorporated in this contactor offers a wide control voltage range (100-250 V 50/60 Hz and DC), enabling it to manage large control voltage variations. This feature not only reduces panel energy consumption but also ensures distinct operations in unstable networks.The AF305-40-11-13 contactor is built with surge protection, providing a compact solution for your needs. Its block type design allows for easy extension with add-on auxiliary contact blocks and a wide range of accessories, enhancing its functionality and adaptability.

The TeSys F contactor is a versatile solution for motor applications, offering a capacity of 115A/690V AC-3. This contactor is designed to handle high operating rates until 2400 cycles/hour and environments up to 55°C, ensuring reliability and durability. It features bolt terminals for easy connection with bars or cables with lugs. The TeSys F contactor comes without a coil, allowing for later selection and installation (coil to be ordered separately). This design also makes installation and maintenance easier, with a drawer for the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). This contactor is multi-standard certified (IEC, UL, CSA, CCC, EAC, Marine) and complies with Green Premium standards (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AF30 contactor series is a robust solution for voltage control applications. These contactors are capable of managing power circuits up to 690 V AC and 220 V DC, making them ideal for controlling 3-phase motors and non-inductive or slightly inductive loads. AF30 contactors feature an electronic coil interface that accepts a wide range of control voltages, from 24 V to 500 V AC at 50/60 Hz or 20 V to 500 V DC. This versatility allows for one coil to be used for different control voltages worldwide without any need for coil changes. The AF30 contactors are equipped with built-in surge protection, eliminating the requirement for additional surge suppressors. They are of the block type design and include 3 main poles along with front and side-mounted add-on auxiliary contact blocks, which are mechanically-linked and comply with Annex L of IEC 60947-5-1 and Annex F of IEC 60947-4-1 for N.C. mirror contacts. The AF30 series also offers a wide range of accessories, providing flexibility in application and installation. This contactor is not only reliable but also user-friendly, making it a preferred choice for voltage control applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 40A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 30HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 90A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 380 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The AF460-30-11-70 is a 3 pole - 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 250 kW / 400 V AC (AC-3) or 400 hp / 480 V UL and switching power circuits up to 700 A (AC-1) or 650 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The AF40-40-00-13 is a 4 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 18.5 kW / 400 V AC (AC-3) and switching power circuits up to 70 A (AC-1) or 60 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 120 VAC 60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 4.92 inches deep. It weighs 3.17 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The UA1-230 Undervoltage Release is an essential component for safety and reliability in various industrial applications. It effectively prevents the manual motor starter from being switched on when its voltage supply is interrupted, ensuring safe operation during emergency switching circuits.This device is specifically designed to prevent automatic restarts after voltage interruption, providing a crucial safety measure in industrial settings. The UA1-230 is compatible with various manual motor starters such as MS116, MS132, and MS165, making it versatile for different applications.The UA1 Undervoltage Release is designed to be attached laterally on the left side of the compatible manual motor starters. This feature ensures easy integration into existing systems without compromising on safety or performance.

ABB's 3-phase Contactor, Model CTR,3P,192A,250-500VAC/DC,1/1, is a versatile solution suitable for various applications including motor starting, isolation, by-pass and distribution. Operating within a wide control voltage range of 250-500 V, this contactor is compatible with both AC (50/60 Hz) and DC power sources.The CTR,3P,192A,250-500VAC/DC,1/1 model is designed to handle maximum voltages up to 1000 V. Its robust construction ensures reliable performance in demanding environments, making it an ideal choice for industrial applications.This contactor's unique design allows it to operate efficiently and effectively, providing a high level of safety and reliability. With its wide voltage range compatibility and high-voltage capability, the CTR,3P,192A,250-500VAC/DC,1/1 is a valuable addition to any industrial automation system.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.76 inches wide and 4.72 inches deep. It weighs 2.40 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys SK mini-control relay, 2 contacts (2NO), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 240V 50/60Hz AC control circuit, connection by screw terminals. For operating rates until 20 cycles/min and ambient temperature -20/+50°C, it procures high reliability and durability. Compact (27mm width), for clipping on a 35mm DIN rail. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V). It provides 110V 50/60Hz AC coils, 2NO+2NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

AF16 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available. Note: AF..-30-..-11 not suitable for a direct control by PLC-output. AF..-30-..-11 contactor type available in some countries: please consult your ABB representative.

The Schneider Electric SpaceLogic TB-IO-W1 is a crucial component in the integration of their Central I/O Modules. This terminal base serves as the I/O bus, connecting seamlessly with the SpaceLogic Central I/O Electronics Module. Each SpaceLogic Central I/O module necessitates one of these terminal bases for optimal functionality.