Mechanical Components

The MXH narrow width precision slide table incorporates recirculating bearings to its new linear guide system to increase rigidity by expanding the width where the load bearings come in contact with the linear guide. The new linear guide system also increases allowable pitch moment by 170%, yaw moment by 210% and roll moment by 240% as well as reduces its weight by as much as 19% from the previous model. Its narrow width footprint allows for multiple units to be mounted adjacently for applications with tight space constraints.

Type S non-reversing magnetic contactors are used to switch heating loads, capacitors, transformers, and electric motors where overload protection is provided separately. Type S contactors have ratings up to 810 amperes. This 3 pole NEMA Size 3 non-reversing contactor has a 90 ampere rating. Three phase NEMA Size 3 contactors have 25 HP at 200, 30 HP at 230 VAC and 50 HP at 460 and 575 VAC ratings. This NEMA contactor has a 100 kA maximum SCCR rating per UL508A when protected by an appropriate circuit breaker or fuse. These contactors are available with replaceable coils in a wide variety of voltages. This contactor has a 110/120 VAC 50/60 Hz coil that is wired for separate control. This NEMA contactor is an open device without an enclosure. This contactor is 7.09 inches tall, 5.47 inches wide and 6.50 inches deep. A wide variety of accessories are available for Type S contactors. Type S NEMA contactors are UL listed and CSA certified.

The CXS Series is a high precision dual piston actuator, boasting an accuracy of 0.1. This series features the CXSL model, which incorporates a ball bushing type for smooth operation and stable travel resistance.The CXSL design ensures non-rotating accuracy, making it ideal for applications requiring precise linear motion. The high precision ball bushing type allows for smooth operation that ensures stable travel resistance, enhancing the overall performance of the actuator.

Series MSZ, a 3-position rotary table, can be adjusted to stop at three different positions within a 190 radius. The MSZ does not require a motor, or any complex machinery to function, only compressed air. Designed initially for the selection and separation of work pieces to either the left or right, the rotary table is controlled via a single, 3-position solenoid valve, ensuring simple setup and operation. This series is currently available in two model types, basic and high accuracy (for higher loads and reduced table deflection). The MSZ can be ordered in four different sizes and is designed to work with an operating pressure range between 0.2 to1 MPa.

The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator s rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

The 6002-2RSH Deep Groove Ball Bearing with Seals is a single row bearing that is particularly versatile and optimized for low noise and vibration, enabling high rotational speeds. This bearing accommodates radial and axial loads in both directions, making it easy to mount and requiring less maintenance than other bearing types. The integral sealing significantly prolongs bearing service life by keeping lubricant in and contaminants out. Its simple, robust design ensures low friction and high-speed capability, making it ideal for various applications.Benefits:Integral sealing prolongs bearing service lifeSimple, versatile, and robust designLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires little maintenance

The SKF 6008-2Z Ball Bearing is a versatile single-row bearing featuring integrated seals. Designed for low friction and optimized for minimal noise and vibration, this bearing supports high rotational speeds. It efficiently handles radial and axial loads in both directions, making it suitable for a wide range of applications. The integrated seal significantly extends the bearing's service life by retaining lubricant and preventing contamination. This bearing's simple, robust design ensures easy installation and reduced maintenance requirements compared to other bearing types.Key Features:Low friction and high-speed capabilityHandles radial and axial loads in both directionsRequires minimal maintenanceIntegrated seal extends service lifeApplications:Ideal for use in electric motors, industrial machinery, and automotive applications where high-speed performance and reliability are crucial.

The SKF 61905-2RS1 Deep Groove Ball Bearing is a single row bearing featuring integral seals on both sides. This versatile bearing is designed to accommodate both radial and axial loads in both directions, making it suitable for a wide range of applications. The low friction design ensures high rotational speeds, while the integral sealing prolongs the bearing's service life by keeping lubricants in and contaminants out. The robust and simple design of the 61905-2RS1 makes it easy to mount and maintain, reducing downtime and maintenance costs. This bearing is ideal for applications requiring high-speed capability, low noise, and low vibration.Benefits:Integral sealing prolongs bearing service lifeSimple, versatile, and robust designLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires little maintenance

The SKF 61800-2RS1 Deep Groove Ball Bearing is a single row bearing designed for versatility and reliability. Featuring integral seals, this bearing effectively retains lubricant and keeps contaminants out, significantly prolonging its service life. Its low friction and optimized design for low noise and vibration make it suitable for high rotational speeds. This bearing can accommodate both radial and axial loads in both directions, ensuring robust performance in various applications. The SKF 61800-2RS1 is easy to mount and requires minimal maintenance, making it a cost-effective and efficient choice for many industrial uses.Key Benefits:Integral sealing for extended service lifeLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsSimple, versatile, and robust designRequires minimal maintenance

The SKF 61904-2RZ Deep Groove Ball Bearing is a highly versatile and robust bearing designed for various industrial applications. This single row deep groove ball bearing features integral seals that significantly prolong its service life by keeping lubricants in and contaminants out. The bearing's low friction and high-speed capability make it ideal for applications requiring efficient and reliable performance.With the ability to accommodate radial and axial loads in both directions, the SKF 61904-2RZ is easy to mount and requires minimal maintenance compared to other bearing types. Its simple yet effective design ensures dependable operation in a wide range of environments.Key benefits of the SKF 61904-2RZ include its integral sealing for extended service life, low friction for high-speed applications, and the ability to handle radial and axial loads in both directions. This bearing is constructed from high-quality bearing steel and features a non-contact seal on both sides, ensuring optimal performance and durability.Applications for the SKF 61904-2RZ include machinery, automotive components, and various industrial equipment where reliable and efficient bearing performance is essential.

The SKF 61804-2RS1 Deep Groove Ball Bearing is a single row bearing with seals or shields, designed for versatility and reliability. This bearing type is optimized for low noise and vibration, enabling high rotational speeds. It accommodates both radial and axial loads in both directions, making it suitable for a wide range of applications. The integral sealing system significantly prolongs the bearing's service life by keeping lubricants in and contaminants out. The simple, robust design of the SKF 61804-2RS1 ensures easy mounting and minimal maintenance requirements, making it an ideal choice for demanding industrial environments.Key Benefits:Integral sealing prolongs bearing service lifeLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires little maintenance

The NSK 6303DDU Series Single-Row Deep Groove Ball Bearings are designed for high performance and reliability in various industrial applications. These bearings feature a robust construction with a bore diameter of 17 mm, an outside diameter of 47 mm, and a width of 14 mm, making them suitable for a wide range of machinery. The 6303DDU series is equipped with rubber seals on both sides to protect against contamination and ensure long-lasting performance.With a basic dynamic load rating of 15000 N and a basic static load rating of 6650 N, these bearings can handle significant radial and axial loads. The grease lubrication allows for a maximum speed of 11000 min-1, ensuring smooth and efficient operation. The chamfer dimension of 1 mm and the precise internal clearance contribute to the bearings' exceptional durability and reliability.These bearings are ideal for use in electric motors, automotive applications, and various industrial machinery where high-speed and high-load capacity are required. The NSK 6303DDU series complies with industry standards, ensuring compatibility and performance in demanding environments.

The SKF 6311-2Z/C3 Deep Groove Ball Bearing is a single row bearing designed for high rotational speeds, low noise, and low vibration. This bearing type is particularly versatile, accommodating both radial and axial loads in both directions. Its robust design ensures ease of mounting and minimal maintenance requirements. The integral sealing system significantly extends the bearing's service life by retaining lubricant and preventing contaminants from entering. Key benefits include low friction, high-speed capability, and a simple, versatile design. Ideal for various industrial applications, this bearing is built to SKF's high standards, ensuring reliable performance and longevity.

The NSK 6902ZZ Deep Groove Ball Bearing is designed to deliver superior performance in a wide range of applications. With a bore diameter of 15 mm, an outside diameter of 28 mm, and a width of 7 mm, this bearing is ideal for high-speed and high-load scenarios. The grease lubrication allows for a maximum speed of 26000 min-1, ensuring efficient operation in demanding environments.This bearing features a basic dynamic load rating of 4750 N and a basic static load rating of 2260 N, providing robust support for various mechanical systems. The chamfer dimension of 0.3 mm and the precise ball diameter of 3.969 mm contribute to its reliable performance and longevity.Engineered with a high number of balls (10) and a lightweight design (0.015 kg), the NSK 6902ZZ ensures smooth and efficient motion. The bearing's construction includes specific abutment and fillet dimensions to facilitate easy installation and secure fitment. Whether used in automotive, industrial, or other mechanical applications, this bearing meets stringent quality standards and delivers consistent results.

The 6202-2Z Deep Groove Ball Bearing with Shields is a single row bearing designed for versatility and reliability. Featuring low friction and optimized for low noise and vibration, this bearing supports high rotational speeds, making it ideal for various applications. It accommodates both radial and axial loads in both directions, ensuring easy mounting and minimal maintenance. The integral sealing system significantly extends the bearing's service life by retaining lubricant and keeping contaminants out.Key Benefits:Integral sealing prolongs bearing service lifeSimple, versatile, and robust designLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires little maintenance

The SKF 6205-2Z Deep Groove Ball Bearing is a single row bearing with seals or shields, offering exceptional versatility and performance. Designed to accommodate both radial and axial loads in both directions, this bearing is optimized for low friction, low noise, and low vibration, enabling high rotational speeds. The integral sealing significantly prolongs bearing service life by keeping lubricant in and contaminants out, reducing maintenance requirements.Key Benefits:Integral sealing prolongs bearing service lifeSimple, versatile, and robust designLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires little maintenance

The 6201-2Z Deep Groove Ball Bearing with Seals is a single row bearing that offers exceptional versatility and performance. Designed to accommodate both radial and axial loads in both directions, this bearing is optimized for low noise and low vibration, enabling high rotational speeds. The integral sealing significantly prolongs the bearing's service life by keeping lubricants in and contaminants out, reducing the need for maintenance.This bearing features a simple, robust design that is easy to mount, making it an ideal choice for a wide range of applications. The low friction and high-speed capability of the 6201-2Z ensure efficient operation in demanding environments. Additionally, the bearing's construction from high-quality bearing steel and the use of a sheet metal cage enhance its durability and reliability.The 6201-2Z Deep Groove Ball Bearing complies with the SKF Explorer performance class, ensuring it meets stringent industry standards for performance and reliability. Whether used in industrial machinery, automotive applications, or other high-speed environments, this bearing delivers consistent, reliable performance with minimal maintenance requirements.

The 6200-2RSH Deep Groove Ball Bearing with Seals is a single row bearing designed for versatility and durability. With seals on both sides, this bearing is optimized for low noise and low vibration, enabling high rotational speeds. It can accommodate both radial and axial loads in both directions, making it suitable for a wide range of applications. The integral sealing helps to significantly prolong the bearing's service life by keeping lubricants in and contaminants out, reducing the need for maintenance.This bearing features a simple, robust design that ensures reliable performance. The low friction and high-speed capability make it ideal for demanding environments. The bearing is easy to mount and requires minimal maintenance compared to other types. It is made from high-quality bearing steel and includes a sheet metal cage for added durability.Applications for the 6200-2RSH include machinery, automotive, and industrial equipment where reliable, high-speed performance is critical. The bearing complies with ISO tolerance class P5 for geometrical tolerances, ensuring precision and reliability in operation.

The SKF 61812-2RS1 Deep Groove Ball Bearing is a single row bearing designed for versatility and high performance. Featuring integral seals, this bearing is optimized for low noise and vibration, enabling high rotational speeds. It accommodates both radial and axial loads in both directions, making it suitable for a wide range of applications. The integral sealing system significantly prolongs the bearing's service life by keeping lubricants in and contaminants out, reducing the need for maintenance.This bearing's simple, robust design ensures reliability and ease of mounting. It is constructed from high-quality bearing steel and features a sheet metal cage. The SKF 61812-2RS1 is ideal for applications requiring low friction and high-speed capabilities, such as electric motors, industrial machinery, and automotive components.Benefits:Integral sealing prolongs service lifeLow friction and high-speed capabilityAccommodates radial and axial loads in both directionsRequires minimal maintenanceSimple and robust design

The SKF 6203 Single Row Deep Groove Ball Bearing is renowned for its versatility and efficiency. Designed to handle both radial and axial loads in both directions, this bearing is ideal for applications requiring high rotational speeds and low maintenance. Its robust construction ensures durability and reliability, making it suitable for a wide range of industrial applications.Featuring low friction and optimized for minimal noise and vibration, the SKF 6203 bearing allows for smooth and quiet operation. The simple yet effective design facilitates easy installation and reduces the need for frequent maintenance, enhancing operational efficiency.With a cylindrical bore and steel cage, this bearing offers excellent performance and longevity. It adheres to stringent industry standards, ensuring consistent quality and reliability. The SKF Explorer class further enhances its capabilities, providing superior dynamic and static load ratings.Applications for the SKF 6203 bearing include electric motors, automotive components, industrial machinery, and various other high-speed rotational equipment. Its ability to handle significant loads and operate at high speeds makes it a preferred choice for engineers and maintenance professionals.