Power Supply

The Altivar Machine ATV320 series of drives is tailored for Original Equipment Manufacturers (OEMs). Its compact design allows for vertical stacking within machine frames. It boasts a rated power of up to 2.2kW / 3hp and operates at voltages ranging from 200V to 240V AC. The robust construction, featuring IEC 60721-3-3 class 3C3 coated printed circuit boards, ensures extended machine availability in harsh environmental conditions, even at ambient temperatures up to 60°C without additional cooling. This drive incorporates functions suitable for a wide range of applications, including high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also supports parallel connections of motors and special drives using the voltage/frequency ratio, static speed accuracy, and energy saving for open-loop synchronous motors. The Altivar Machine ATV320 weighs 1.4kg and has dimensions of 105mm wide, 143mm high, and 138mm deep. It comes with five safety functions configured using SoMove software to meet various safety requirements. These drives are suitable for packaging, material handling, textile, material working, mechanical actuators, and hoisting applications. The Altivar Machine ATV320 conforms to international standards such as IEC, UL, TUV, KC, and others. It is available with mounting accessories and external options like braking resistors, line chokes, motor chokes, and additional EMC filters. The product is delivered in two packages and can be mounted vertically (+/- 10 °) on a panel. The Altivar Machine ATV320 is fully integrated into Schneider Electric’s EcoStruxure Machine through DTM, allowing for configuration, control, and diagnostics directly in SoMachine and SoMove software using the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc., relating to environmental protection.

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 0.37kW / 0.5hp and a rated voltage from 200V to 240V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 0.9kg and its dimensions are 72mm wide, 143mm high, 128mm deep. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in one package. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Altivar Process ATV600 Variable Speed Drive is a robust solution for feeding 3-phase synchronous and asynchronous power motors. It boasts three built-in RJ45 communication ports, one Ethernet port, and two serial ports. This drive operates at a rated supply voltage ranging from 380V to 480V AC. The Altivar Process ATV600 offers up to 30% energy savings when on standby due to its innovative 'Stop and Go' operation, without any additional costs. It is suitable for motors with a power rating of up to 315kW/500hp for applications requiring slight overload (up to 120%). For applications requiring significant overload (up to 150%), it can handle motors with a power rating of up to 250kW/400hp. Weighing 203kg, the Altivar Process ATV600 has dimensions of 598mm wide, 1195mm high, and 380mm deep. This drive is ideal for fluids management processing and energy saving, offering extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas, and food and beverage applications. Accessories such as a fan kit and graphic display terminal are available with the Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in a vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting energy management, asset management, and overall performance of the process.

The SITOP PSU8600 is a robust power supply unit designed for industrial applications. It offers a wide input voltage range of 3 AC from 400-500 V, ensuring compatibility with various power sources. The output is regulated at 24 V DC, providing a stable and reliable power source. The unit features PN/IE connections for easy integration into existing systems. With its integrated web server and OPC UA server, the SITOP PSU8600 offers seamless connectivity and control options. It is important to note that the *Ex approval* feature is no longer available.

This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 55kW / 75hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 57.9kg and its dimensions are, 271mm wide, 908mm high, 309mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS relating to environmental protection.

The Altivar Machine ATV320 is a versatile variable speed drive designed for Original Equipment Manufacturers (OEMs). This high-performance drive can handle both synchronous and asynchronous motors, with a maximum rated power of 5.5kW and a voltage range from 380V to 500V.The ATV320 is designed for harsh environments and comes with washable drives for easy maintenance. It features an embedded EMC C2 filter and offers IP66 protection, ensuring reliable operation even in challenging conditions.Communication protocols such as Modbus and CANopen are standard, with access via the RJ45 connector on the front of the drive. The drive weighs 22kg and includes 5 safety functions that help meet safety requirements.The Altivar Machine ATV320 is compatible with EcoStruxure Machine software for a seamless development, configuration, and commissioning experience. It can be installed alone or in multi-drive configurations, making it ideal for various applications such as conveyors, carton packers, gantry cranes, woodworking, metal processing, fans, and Food & Beverage industry.The ATV320 series is designed to meet international standards like IEC, UL, TUV, KC, and others. It offers easy integration for simple and advanced machine requirements with proven motor control and connectivity.

The SINAMICS G120 POWER MODULE PM240-2 is a robust and efficient solution that integrates a built-in Class A filter and braking chopper, designed for a wide range of applications. It operates at 3AC380-480V with a tolerance of +10/-20% and a frequency range of 47-63Hz. The module is capable of handling high overloads, with an output capacity of 75kW for 200%, 150% at 3S, 100% at 240S under high ambient temperatures ranging from -20°C to +50°C. In low overload conditions, it offers an output capacity of 90kW for 150%, 110% at 57S, and 100% at 240S under ambient temperatures ranging from -20°C to +40°C.The module is designed with a compact size of 708 x 305 x 357 (HxWxL) mm and offers IP20 protection without the need for a control unit or panel. It is approved for use in CU firmware-version V4.7 HF8.

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP55 and it has a built-in EMC filter. It works at a rated power up to 22kW / 30hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 49.5kg and its dimensions are, 284mm wide, 720mm high, 315mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.

TeSys GB circuit breaker, 2 poles (2P), 2A/415V, for the protection of industrial equipment control circuits. It provides thermal magnetic protection with a magnetic tripping level at 26A (13 In) and breaking capacity Icu 15kA@415V. It can also be used for protection of DC loads up to 2A/48V DC-13 with a breaking capacity Icu 1.5kA@24V. Compact device (30mm wide), mounting on 35mm DIN-rail, control by toggle lever (start-stop guaranteed for 8000 cycles). Sold in lots of 3 units. It conforms to IEC 60947-1 and IEC 60947-2, Green Premium product (RoHS/REACh).

The SINAMICS g120 power module PM240-2 is a robust solution designed for industrial applications. It features a built-in CL. A filter and braking chopper, providing efficient power management for 1/3AC200-240v +10/-10% 47-63HZ output.This module offers high overload capabilities of up to 1.5KW for 200% 3s, 150% 57s, and 100% 240s at an ambient temperature range of -10 to +50 degrees Celsius. It also provides low overload capabilities of up to 2.2KW for 150% 3s, 110% 57s, and 100% 240s at an ambient temperature range of -10 to +40 degrees Celsius.With dimensions of 291 x 100 x 165 (HxWxD), the PM240-2 is designed for optimal space efficiency. It comes with FSB protection, IP20 rating, and is approved for firmware version v4.6 without a control unit and panel.

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This discrete I/O module has 8 input channels, 8 solid state output channels. It is a discrete I/O module with a discrete input/output voltage of 24V DC, an output current of 0.5A, a maximum power dissipation of 3.7W and current consumption of 67mA at 24V DC, 111mA at 3.3V DC. This product is robust, high quality and based on the latest innovative technology. It offers 447581 hours of MTBF. It is an IP20 rated product. It weighs 0.115kg. It is suitable for medium to large process applications. This product is certified by Merchant Navy, RCM, CSA, EAC, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This input compatible with 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

The SINAMICS G120C is a high-performance motor drive with a rated power of 7.5kW and a maximum overload capacity of 150% for up to 3 seconds. This drive operates at a voltage range of 3AC380-480V, with a frequency range of 47-63HZ. It is designed for unfiltered I/O interface applications and features an integrated fieldbus system that supports both USS and Modbus RTU protocols. The G120C offers comprehensive protection features, including IP20 and UL open type protection. Its compact design, with dimensions of 196x100x203mm (HxWxD), makes it suitable for a wide range of industrial applications. The drive is equipped with external 24V power supply.

SINAMICS g120 power module pm250 with built in cl. a filter possibility of regeneration 3AC380-480v +10/-10% 47-63HZ output high overload 37KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c output light overload 45KW for 150% 3s,110% 57s,100% 240s ambient temp -10 to +40 deg c 635 x 275 x 204 (hxwxd), fse protection IP20 without control unit and bop

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):1 /5; UPRI(V):400+/-5%; USEC(V):110; ISEC(A):9,09; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:40 /B; IP00; TYPE OF TERMINALS:SCREW/TAB CONNECTION; INSTALLATION:SCREW; EN 61558-2-1, -2-2, -2-4 >UL/CSA-RECOGNIZEDCONTROL CIRCUIT TRANSFORMERISOLATION TRANSFORMER<

This product is a Siemens SITAS transformer with a single phase and a power rating of 250 VA. It offers an up to 600V primary voltage and a secondary voltage of 2X115V. The transformer has a current rating of 1,09-2,18A and operates at a frequency of 50-60 Hz. The vector group/shielding is II0/0, and the transformer is designed for indoor use with an IP00 rating. It features screw/tab connection terminals and can be installed using screws or mounting rails. This model is UL/CSA-recognized and complies with EN 61558-2-1, -2-2, and -2-4 standards. This transformer is ideal for control circuit applications and provides isolation between primary and secondary circuits. It is a reliable solution for various industrial and automation needs.

>ISOLATION TRANSFORMERCONTROL INSTALLATION:SCREW; EN TERMINALS:SCREW CONNECTION; TA/ISOKL:55 /H; IP00; TYPE OF GR./SHIELD WNG.:II0 /0; F(HZ):50...60; VECTOR USEC(V):2X115; ISEC(A):2X21,7; 440-415-400-380-230-208; UPRI(V):550-525-500-480-460- PN/PN(S6)(KVA):5 /19; TRANSFORMER SITAS; PHASES:1;

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 0.75kW/1HP for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 0.37kW/0.5HP for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 200Vac to 240Vac. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments: oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures.

This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 1.5kW / 2hp and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 2kg and its dimensions are, 107mm wide, 143mm high, 150mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It can also be mounted directly on a 35 mm wide DIN rail, thanks to the kit VW3A31852, to order separately. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.

The SIRIUS soft starter is a versatile device that operates at 400V. It comes in two configurations: standard and inside-delta. The standard configuration has a maximum current of 551A and power of 315kW, while the inside-delta configuration can handle up to 954A and 560kW.This soft starter is compatible with a wide range of voltages, from 200V to 460V AC, and specifically supports 230V AC. It features screw terminals for easy installation and use.