Process Measurement

ISE35 is a digital pressure sensor that integrates with multiple regulators and FRL combinations from SMC, including series AC, AR, ARM, ARP and AW. The ISE35 mounts into a ported interface on any compatible series using an included mounting kit. A detachable 3-wire cable includes power and switch output leads. Instantaneous readings are shown on the 3 digit, 2 color display. The color can be set to red or green, or shifted from one to the other to alert when reaching a set point. An indicator for the switch output is also visible. Additional functions enhance security, power saving, and response time.

ZSE2 is a basic vacuum switch with 1 digital output (NPN or PNP). No analog output is included. The ZSE2 monitors vacuum level down to -101 kPa. ZSE2 can be mounted in a ZX or ZR generator unit, or piped by metric or NPTF male threads. A rotary trimmer adjusts the switch set point. A red LED indicator also lights to correspond with the output signal. Electrical connections include a 3 wire grommet cable or snap-in connector. ZSE2 is CE and RoHS compliant, with an IP40 enclosure rating.

ISE20A is a digital pressure sensor with an informative, easy to read 3 screen, 3 color display. The main screen shows the instantaneous reading in red or green, while two sub-screens can display the setting label and its numeric value in orange. Compared to the ISE20, the ISE20A adds a 2nd switch output, as well as an analog voltage or current output. The switch output responds within 1.5ms once the set pressure value is reached. Response time can be adjusted to reduce chattering. ISE20A is UL/CSA, CE and RoHS compliant, with an IP40 enclosure rating.

PSE541 and PSE543 are remote vacuum sensors with a 1 to 5V analog signal output. The sensor construction optimizes space savings, for tight, constrained spaces. PSE541 is for a low vacuum (-101 to 0 kPa), while PSE543 is for compound pressure (-100 to 100 kPa). PSE sensors can monitor any non-corrosive, non-flammable gas. 8 different port options offer tremendous adaptability to various applications. The cable is molded into the sensor head and is not replaceable. PSE541 and PS543 are UL/CSA. CE amd RoHS compliant, with an IP40 enclosure rating.

ZSE10 compact, digital pressure switch for vacuum/compound pressure has been reduced in height by approximately 50% when compared to the ZSE30A. Up to 10 remote sensors can be set at once using the copy settings function. Options include direct mount, panel mount or DIN rail mount, and a choice of 2 piping directions.

The SMC Compact Remote Analog Vacuum Sensor, model PSE543-R04, is designed for optimal space savings in constrained environments. It features a 1 to 5V analog signal output and can monitor any non-corrosive, non-flammable gas. The sensor construction offers eight different port options, providing adaptability for various applications. The cable is molded into the sensor head and is not replaceable. This vacuum sensor is UL/CSA, CE, and RoHS compliant with an IP40 enclosure rating. It is suitable for a compound pressure range of -100 to 100 kPa.

PSE541 and PSE543 are remote vacuum sensors with a 1 to 5V analog signal output. The sensor construction optimizes space savings, for tight, constrained spaces. PSE541 is for a low vacuum (-101 to 0 kPa), while PSE543 is for compound pressure (-100 to 100 kPa). PSE sensors can monitor any non-corrosive, non-flammable gas. 8 different port options offer tremendous adaptability to various applications. The cable is molded into the sensor head and is not replaceable. PSE541 and PS543 are UL/CSA. CE amd RoHS compliant, with an IP40 enclosure rating.

The Wika Model S-11 Flush Pressure Sensor is designed for general applications involving viscous and solids-containing media. This robust sensor features a flush diaphragm, ensuring accurate and reliable pressure measurements without clogging. The stainless steel case and wetted parts provide excellent durability and resistance to harsh environments.With a power supply range of 10 to 30 V DC and an output signal of 4 to 20 mA (2-wire), the S-11 is highly versatile and compatible with various industrial systems. The sensor offers a measuring range of 0 to 0.1 bar, with an accuracy of 0.5% of span, making it suitable for precise pressure monitoring.The S-11 is equipped with a G 1 B process connection and an NBR O-ring for secure and leak-free installation. It also features a 4-pin L-plug electrical connection (DIN EN 175301-803) with IP65 ingress protection, ensuring reliable operation in demanding conditions. The sensor is compliant with PED 2014/65/EU, EMC 2014/30/EU, and RoHS 2011/65/EU standards.Applications for the S-11 include monitoring pressure in systems with viscous or particulate-laden media, such as wastewater treatment, food and beverage processing, and chemical manufacturing.

ISE35 is a digital pressure sensor that integrates with multiple regulators and FRL combinations from SMC, including series AC, AR, ARM, ARP and AW. The ISE35 mounts into a ported interface on any compatible series using an included mounting kit. A detachable 3-wire cable includes power and switch output leads. Instantaneous readings are shown on the 3 digit, 2 color display. The color can be set to red or green, or shifted from one to the other to alert when reaching a set point. An indicator for the switch output is also visible. Additional functions enhance security, power saving, and response time.

PS1000 is a compact pressure switch providing a digital output signal. The switch is set with a trimmer rotating through a 220 of range using a precision screwdriver. A red LED lights up when the output signal is ON. Insert the switch port into a one touch fitting to monitor pressure. The PS1000 monitors positive pressure, with the signal ON when pressure is above the set point. The PS1000 can measure the pressure of any non-corrosive, non-flammable gas. PS1000 is RoHS and optionally CE compliant, with an IP40 enclosure.

PSE540 is a remote pressure sensor with a 1 to 5V analog signal output. This sensor s construction optimizes space savings, for tight, constrained spaces. The rated pressure range is suitable for a standard pneumatic system. PSE sensors can measure pressure of any non-corrosive, non-flammable gas. 8 different port options offer tremendous adaptability to various applications. The cable is molded into the sensor head and is not replaceable. PSE540 is UL/CSA, CE and RoHS compliant, with an IP40 enclosure.

ISE10 is a compact pressure sensor suitable for mounting in panels or tight spaces. This sensor has an integrated alphanumeric LED display with red and green LED switch indicators. Switch delay time is 2.5ms, while current consumption is 40mA. ISE10 meets UL/CSA, CE and RoHS standards, and has an IP40 enclosure rating.

PSE530 and 532 are remote pressure sensors with a 1 to 5V analog signal output. 530 is for a standard pneumatic system s pressure range, while the 532 model is for low pressure. PSE sensors measure pressure of any non-corrosive, non-flammable gas. An accuracy of 2% of the full scale rated pressure range is suitable for general purpose applications. The cable is replaceable, with a locking thread relief. PSE530 and PSE532 are CE and RoHS compliant, with IP40 enclosure ratings.

The Schneider Electric HC-201 Humidity Stat Duct is engineered to provide precise humidity control in duct systems. Ideal for a variety of HVAC applications, this humidistat ensures optimal environmental conditions by maintaining humidity levels between 15% and 95%. The device operates on 24/120/240 VAC and features a SPDT switch for versatile control options. Constructed from durable beige plastic, the HC-201 is housed in a NEMA 1 enclosure, making it suitable for indoor use. The compact design, with an overall depth of 3 1/2 inches, height of 4 3/4 inches, and width of 6 1/2 inches, allows for easy installation in various duct configurations. This product is CSA and UL listed, ensuring compliance with industry standards for safety and performance.Applications: The Schneider Electric HC-201 is perfect for commercial and industrial HVAC systems where precise humidity control is essential to maintain air quality and comfort.

The SIPLUS CMS Hardware IFN VIB-A is a robust solution designed for the acquisition of analog signals and the detection of machine vibrations. This hardware features 6 IEPE inputs, specifically tailored for vibration acceleration measurement. The unit operates at UB=24VDC, ensuring reliable performance in diverse environments. With an IP67 rating, it is well-equipped to handle challenging conditions, making it a versatile choice for various industrial applications.

PAC3220 LCD 96 x 96 mm, Panel Mount Power Meter, AC/DC, 100+ Measurements, THD harmonics, 2-Dig In & 2-Dig Out, Modbus TCP, S tandard Dual 10/100Base-T Ethernet with up to 3 master ability. Optional expansion modules for Modbus RTU, Profibus, Profinet. U rated input: 690/400V 45-65Hz IE rated input: X/1A oder X/5A AC Power supply: 100 ... 250 V +-10 % AC/DC screw connections

The LMT110 from IFM is a highly reliable and accurate level sensor designed for industrial automation applications. With its robust stainless steel construction and hermetically sealed design, it can withstand harsh environments and ensure long-term durability. The sensor features a high-resolution measuring range of up to 1500 mm, making it suitable for use in various tanks and containers. Additionally, the LMT110 utilizes IO-Link technology, enabling easy integration with other automation systems and providing real-time data transmission for efficient and precise monitoring. With its advanced features and capabilities, the LMT110 is an ideal solution for level sensing in industrial automation applications, ensuring reliable and efficient operations.

The SMC ISE30A-01-P-M 2-Color Display Digital Pressure Switch is designed for high-precision positive pressure monitoring. Featuring a compact design, it allows for both vertical and horizontal contact mounting, making it ideal for space-constrained applications. The switch includes a display calibration function and supports simultaneous copying for up to 10 units, enhancing operational efficiency. The unit is equipped with a PNP open collector output and a fixed SI unit display, ensuring reliable performance and easy integration into various systems. This model comes with a one-touch fitting option and does not include a lead wire, making it a versatile choice for different installation requirements. The ISE30A series is compliant with industry standards, providing robust and accurate pressure measurement solutions.

The LR7000 from IFM is a state-of-the-art industrial automation product that delivers reliable and precise control for a wide range of applications. With its advanced sensing capabilities and intuitive programming interface, the LR7000 is the ideal solution for automating complex manufacturing processes and optimizing production efficiency. This versatile component is designed to work seamlessly with a variety of industrial systems, including conveyors, robotics, and assembly lines, making it an indispensable tool for any modern manufacturing operation. With its rugged construction and long-lasting durability, the LR7000 is built to withstand even the harshest industrial environments, ensuring reliable performance and consistent results for years to come. Whether you're looking to improve efficiency, reduce downtime, or increase productivity, the LR7000 from IFM is the perfect choice for your industrial automation needs.

ISE35 is a digital pressure sensor that integrates with multiple regulators and FRL combinations from SMC, including series AC, AR, ARM, ARP and AW. The ISE35 mounts into a ported interface on any compatible series using an included mounting kit. A detachable 3-wire cable includes power and switch output leads. Instantaneous readings are shown on the 3 digit, 2 color display. The color can be set to red or green, or shifted from one to the other to alert when reaching a set point. An indicator for the switch output is also visible. Additional functions enhance security, power saving, and response time.