Switchgear & Power Supply

SINAMICS G120X Rated power: 1.1 kW At 110% 60s, 100% 240 s Unfiltered 380-480 V 3 AC +10/-20% 47-63 Hz Ambient temperature -20 to +45 °C Size: FSA Degree of protection IP20 / UL open type Paint finish 3C2 With Intelligent Operator Panel Without IO expansion Fieldbus integrated: PROFINET PN, Ethernet IPSpare part: Only preferred type 6SL3220-3YE12-0UF0. MLFBs within the MLFB 6SL32.0-.YE12-.UF0 can be credited. SIOS 109761925 Spare part: Only preferred type 6SL3220-3YE12-0UF0. MLFBs within the MLFB 6SL32.0-.YE12-.UF0 can be credited. SIOS 109761925

SINAMICS G120P POWER MODULE PM230 WITH BUILT IN CL. A FILTER PROTECTION IP55 / UL TYPE12 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 45KW FOR 110% 60S,100% 240S AMBIENT TEMP 0 TO +40 DEG C(LO) 751 X 320 X 329 (HXBXT), FSE WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU230P-2 FIRMWARE-VERSION V4.3.2

This SSP three-phase solid state relay is part of the range of solid state modular relays Harmony. It features 50A power rating and 3NO contacts. It features a control circuit voltage of 18V to 36V AC and an output voltage (load output) of 48V to 530V AC. This relay is maintenance free, fully electronic with unlimited life span. It features a control input voltage LED indicator in green. Its protection index is IP20. It weighs 240g and its dimensions are, 101.3mm wide, 79.7mm high, 35.4mm deep. 0 It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. 0 0 0 It can be mounted on panel fixed by screws. 0 0 0

The SINAMICS G120C is a robust and versatile motor control solution, boasting a rated power of 4.0KW with an impressive 150% overload capacity for up to 3 seconds.Designed for three-phase AC operation at voltages ranging from 380V to 480V with a tolerance of +10/-20%, this motor control solution operates within a frequency range of 47-63Hz. It is equipped with an integrated filter class A I/O interface, offering a comprehensive set of inputs and outputs including 6 digital inputs (DI), 2 digital outputs (DO), 1 analog input (AI), and 1 analog output (AO).The SINAMICS G120C is also equipped with the Safe Torque Off feature, ensuring safe operation during fault conditions. It supports various communication protocols such as USS/Modbus RTU, providing seamless integration with other systems.This motor control solution features a compact design with dimensions of FSA 196x73x203 (HxWxD), making it suitable for a wide range of applications. It is protected against environmental factors with an IP20 rating and complies with UL standards, ensuring reliable operation in various conditions.

The Siemens Circuit Breaker MSP S00 is a reliable solution for motor protection, classified as Class 10. It offers an A-release of 0.18...0.25A and N-release of 3.3A screw terminal connection. This standard switching capacity circuit breaker is designed to ensure optimal performance and safety in various applications.

The System pro M compact S200 miniature circuit breakers are designed for current limiting. They incorporate two distinct tripping mechanisms: the delayed thermal mechanism for overload protection and the electromechanical mechanism for short-circuit protection.These circuit breakers come in various characteristics (B, C, D, K, Z), configurations (1P, 1P+N, 2P, 3P, 3P+N, 4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the S200 range adhere to IEC/EN 60898-1, IEC/EN 60947-2, UL1077 standards, enabling their use in residential, commercial, and industrial applications.The bottom-fitting auxiliary contact can be installed on the S200 to save space by 50%.

The CP-E 24/5.0 is a robust power supply designed for diverse applications. It boasts a broad input voltage range of 90-132 V AC, 180-264 V AC and 210-375 V DC, with an auto-select feature for 115 or 230 V AC. The rated output power is 120 W, providing a steady current of up to 5 A at an output voltage of 24 V DC.The CP-E 24/5.0's adjustable output voltage ranges from 22.5 to 28.5 V DC, ensuring flexibility for various system requirements. Its U/I output characteristic allows for efficient power management. To enhance capacity, up to three units can be connected in parallel.For added reliability, a redundancy unit is available as an accessory. This power supply is ideal for applications where power efficiency and reliability are paramount.

The SITOR fuse link, equipped with blade contacts, offers robust protection in electrical systems. With a rating of 630A and a voltage capacity of 690VAC, this fuse link is designed to handle high-current applications. Its front indicator provides a clear visual cue for monitoring its status. The SITOR fuse link is a reliable choice for electrical systems that require robust protection against overloads and short circuits. Its blade contacts ensure secure and efficient connection, while the NH3 rating indicates its suitability for high-current applications. The front indicator adds a layer of convenience, allowing users to easily monitor the status of the fuse link.

The Siemens AC/DC Contactors, Model S6, are designed to handle high power loads up to 75KW at 400V AC (50-60 Hz) or DC operation. These contactors feature a robust frame size S6 with auxiliary contacts that provide both Normally Open (NO) and Normally Closed (NC) functions, making them suitable for a wide range of applications. The electronic drive system incorporates a PLC interface, enabling seamless integration into automation systems. The contactor also includes 24V DC screw terminal connections for easy wiring.The Siemens AC/DC Contactors are equipped with sps interface and electronic rail connections, ensuring reliable performance in demanding industrial environments. With a maximum load capacity of 150A, these contactors offer high efficiency and durability. The auxiliary contacts provide a 2NO + 2NC configuration, making them versatile for various applications.

The Schneider Electric TeSys Deca Capacitor Contactor is a robust solution designed for switching 3-phase capacitor banks with a capacity of up to 63kVAR at 400/415V 50Hz. It boasts a compact design, measuring just 85mm in width, and offers versatile mounting options including DIN-rail or screw fixing. This contactor features a 230V AC coil operating at 50/60 Hz, ensuring seamless integration into various environments. It is equipped with 1NO+2NC instantaneous auxiliary contacts and front-mounted early make poles for enhanced performance. The contactor comes pre-wired with damping resistors to limit current, enabling it to operate at rates of up to 240 cycles per hour in environments up to 60°C. It is multi-standard certified (IEC, UL, CSA) and compliant with the shunt capacitors standard IEC 60831, making it a Green Premium product that adheres to RoHS/REACh directives.

The Siemens SITAS 4AM5742-5AT10-0FC0 is a single-phase transformer designed to provide stable and isolated power for control circuits. This transformer is built to withstand demanding industrial environments, offering reliable voltage conversion and electrical isolation.With a continuous power rating (PN) of 0.85 kVA (850 VA), it provides ample capacity for various loads. It features a primary voltage of 400V AC with a +/-5% tolerance, and delivers a stable 230V AC secondary output at 3.7 Amperes. Operating efficiently at both 50 and 60 Hz, this transformer is versatile for global applications.It adheres to a II0 vector group and includes a shield winding, along with a thermal class B insulation for enhanced safety. With an IP23 protection rating and convenient screw/tab connections, this Siemens transformer is designed for screw mounting. It is compliant with EN 61558-2-1, -2-2, and -2-4 standards, making it recognized as both a control circuit transformer and an isolation transformer.

The SINAMICS PM240-2 power module is designed without a filter, incorporating a built-in braking chopper for efficient operation. This module operates at 1/3AC 200-240V with a +10/-10% voltage tolerance and a frequency range of 47-63HZ. It offers high overload capabilities, providing up to 2.2KW for 200%, 150%, and 100% ambient temperatures ranging from -10°C to +50°C.For lower overloads, the module delivers a maximum output of 3KW at 150%, 110%, and 100% ambient temperatures within the range of -10°C to +40°C. The dimensions are 355 x 140 x 165 mm (HxWxD), and it comes with FSC protection, IP20 rating, without a control unit or panel. This module is approved for firmware version v4.6.

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):0,063 /0,19; UPRI(V):230+/-5%; USEC(V):24; ISEC(A):2,63; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:40 /B; IP00; TYPE OF TERMINALS:SCREW/TAB CONNECTION; INSTALLATION:SCREWS/MOUNTING RAILS; EN 61558-2-2, -2-6 >CONTROL CIRCUIT TRANSFORMERSAFETY ISOLATING TRANSFORMER<

TeSys F AC coil 220/230V 40-400Hz (voltage code M7/P7), low sealed consumption, for TeSys F 3-pole and 4-pole contactors LC1F400. It operates in voltage limits 0.85-1.1 Uc and environments until 55°C. It provides high operating rates to the contactor, until 2400 cycles/hour. Green Premium compliant (RoHS/REACh).

The HRC Fuse Link is designed for high rupturing capacity applications. With a rating of 25A, it can handle up to 660VAC and 250VDC. This fuse element features a front indicator for easy identification and live grip lugs for secure connection. The non-insulated grip lugs ensure reliable electrical conductivity. The HRC Fuse Link is ideal for low voltage (LV) applications, offering a robust solution for your power needs.Key Features:Rating: 25A, 660VAC, and 250VDCFront indicator for easy identificationLive grip lugs for secure connectionNon-insulated grip lugs for reliable electrical conductivity

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 0.37KW with 150% overload for 60sec integrated filter c3 i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection IP20/ ul open type size fsa 90x150x146(hxwxd)

This product is a set of Polyamide (PA) Crimp Termination Inserts, featuring a male design. They are available in the color RAL 7032 (pebble grey). These inserts are rated for a current of 10A and come in size 3A with 7 contacts. The conductor cross-section ranges from 0.14 to 2.5 mm².

The Siemens S6 Power Contactor is a robust electrical switchgear component designed to handle high power applications. With a rating of 115A and 55kW at 400V, this contactor is ideal for AC and DC operation. It features auxiliary contacts that provide 2 NO + 2 NC functionality, making it versatile for various industrial applications. The contactor comes with conventional rail connections, ensuring easy installation and maintenance. The frame size S6 busbar connections drive allows for efficient power distribution. The auxiliary contacts are designed to handle high currents, ensuring reliable operation in demanding environments.

The Siemens SIRIUS Surge Suppressor S00 Varistor is an essential accessory for safeguarding your contactors against voltage spikes and surges. Specifically designed for use with 3RT2.1 contactors and 3RH2 auxiliary contactors, this varistor operates efficiently within a control supply voltage range of 24-48V AC at 50/60 Hz and 24-70V DC. Its robust design ensures reliable performance in various industrial environments.Featuring a compact and easy-to-install clip-on design, the surge suppressor can be mounted in any position, making it versatile for different setups. The device complies with CE, UL, and CSA certifications, ensuring adherence to international safety and quality standards. With an operational temperature range of -25 to +60°C and storage temperature range of -40 to +80°C, it is built to withstand harsh conditions.The environmental footprint of this product is minimal, with an Environmental Product Declaration (EPD) available, and it complies with the RoHS directive since October 2009. The surge suppressor also meets the REACH Art. 33 duty to inform requirements, with lead content managed according to regulatory standards.Ideal for industrial automation systems, the Siemens SIRIUS Surge Suppressor S00 Varistor provides reliable protection, ensuring the longevity and efficiency of your contactors.

TeSys enclosed starter with switch disconnector, 3 poles, Ithe 20A 690V, for main switching in motor applications up to 7.5kW@400V AC-23. Enclosure providing IP65 protection, fitted with a black rotary handle and black front plate, padlockable (padlocks not included). It includes a 3-pole Vario switch body V0 with 2 possible add-on module attachments. Surface mounting enclosure with screw fixing, 2 knock-outs for cable glands on top and bottom, sealable cover. It conforms to IEC 60947-4-1, Green Premium compliant (RoHS/REACh).