Niederspannungsschaltanlagen

The MasterPact MTZ3 40H2 circuit breaker frame is engineered for 4-pole applications, accommodating a rated current of 4000A. With a maximum operational voltage of 690VAC at 50/60Hz, it features a breaking capacity of 150kA rms at 415VAC 50/60Hz. This frame is compatible with the MicroLogic X control unit, which must be ordered separately, as well as the corresponding chassis.Designed to safeguard electrical systems from overloads, short circuits, and ground faults, this circuit breaker frame is compliant with international standards such as IEC/EN 60947-1 and IEC/EN 60947-2. The dimensions of the frame are 1016mm in width, 479mm in height, and 403mm in depth when combined with the chassis. Its operational features include a maximum breaking time of 25 ms and a mechanical durability rated for 10,000 cycles with periodic maintenance.The frame is suited for mounting on either base plates or rails and offers a pollution degree of 3, ensuring reliable performance in various environments. The MasterPact MTZ3 circuit breaker can operate efficiently in ambient temperatures ranging from -25°C to 70°C, with storage capabilities extending from -40°C to 85°C. It is recognized as part of the Schneider environmental data program, contributing towards energy efficiency and safety in electrical installations.

PLC-INTERFACE with electronic changeover contact, consisting of PLC-BSC.../21 basic terminal block with screw connection and integrated miniature solid-state relay, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input: 24 V DC, output: 3 V DC ... 48 V DC/500 mA

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 200 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Solid State Contactor,SIRIUS SC 1 Pole 20 Amps at 400 VAC to 600 VAC 24 VDC Coil DIN Rail or Panel Mount Screw Terminals 22.5 mm Relay Width 22.5mm Heat Sink Width Instantaneous Switching UL File E143112 in Vol.1 Sec.8

The 3VA51 Circuit Breaker features a thermal-magnetic trip unit, specifically the TM210, which provides both overload and short-circuit protection. With a rated current of 110A and a high breaking capacity of 65kA at 480V, it is suitable for various applications requiring reliable electrical protection.Constructed as a built-in device, it measures 3 x 5.5 x 3.7 inches, and is designed for top hat rail mounting. The breaking capacity reaches up to 70 kA at 400 V, 50 Hz, ensuring robust performance. Notably, the circuit breaker does not include lugs and is equipped with a fixed overload release current setting of 110A.Additionally, the device is IP40 rated, indicating its suitability for indoor use, and is manufactured in the Czech Republic. It does not have integrated earth fault protection or under-voltage release features, making it a straightforward choice for applications where such capabilities are not necessary.

The Multi9 C60BP functions as a miniature circuit breaker (MCB) specifically tailored for low voltage applications. This 1P device has a rated current of 0.5A and a C tripping curve, which allows for effective circuit protection against overloads and short circuits.It adheres to the EN/IEC 60947-2 standard, featuring a short circuit breaking capacity of up to 3kA at 415VAC. The breaker is suitable for both industrial and residential applications, complying with various standards including EN/IEC 60898-1. Designed for use by original equipment manufacturers (OEMs) and control panel builders, it provides essential protection against electrical hazards.With a mechanical endurance rating of 20,000 cycles and an electrical endurance of 10,000 cycles, the device is built for longevity. The operational voltage reaches up to 240VAC, and it has a rated insulation voltage of 500VAC. The rated impulse withstand voltage is 6kV, ensuring reliable operation in diverse environments.Installation is facilitated via a clip-on mechanism for DIN rail mounting, occupying a width of 2 pitches (18mm). The unit has an IP20 protection rating on its terminals and operates effectively within an ambient temperature range of -30°C to 70°C, with storage capabilities from -40°C to 80°C. Its light grey color (RAL7035) makes it suitable for various applications.

LC2D09M7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 220V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D09M7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 4kW@400V. It includes a 220V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 220V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 2 million cycles at 9A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

The Modicon MCM safety controller CPU, equipped with 8 safe digital inputs, 2 start/restart interlock inputs, and 2 output OSSD pairs, offers a robust platform for monitoring and controlling safety functions. It features captive screw clamp terminals for easy electrical connection and an IP20 rating for enhanced durability. The controller's LED indicators provide real-time status updates on power supply, run mode, errors, input status, communication, master enable, restart signal, and output channels. This safety controller is designed to handle a maximum power dissipation of 3W at a rated supply voltage of 24V DC. It weighs 0.25kg and measures 22.5mm (Depth) x 99mm (Height) x 114.5mm (Width), making it compact and easy to install on a 35mm DIN rail conforming to EN 50022. The Modicon MCM safety controller system is compatible with accessories such as memory cards and backplane connectors, providing scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, and up to 32 or 48 diagnostic status outputs. This system is designed to minimize the risk of human access to dangerous moving parts of a machine by monitoring multiple safety functions. The Modicon MCM safety controller CPU is certified by TüV SÜD, meeting industrial safety standards of Category 4, PL e according to EN/ISO 13849-1 and SILCL 3 according to IEC/EN 61508 and IEC/EN 60261.

Harmony 22 mm modular push buttons, selector switches, pilot lights are designed for industry. This range combines simplicity of setup, flexibility and a robust construction. An ingenious locking system consisting of a snap fit head and body that can be tightened with a single screw but still ensuring an easy and yet secure mounting. Harmony XB4/ZB4 are 22 mm chromium plated metal modular push buttons, selector switches and pilot lights connecting to fully metal mounting collar. The operators can be purchased as complete operators or various modules that can be assembled to meet the user’s specific requirement. Harmony XB5/ZB5 are 22 mm plastic modular push buttons, selector switches, pilot lights. The operator can have a round and square plastic bezel. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66 / IP67 / IP69 / IP69K, making it ideal for operation in harsh environments. The contacts can be used for low load electrical contact and high power applications. Shake proof connection screws make periodic retightening unnecessary. A complete set of accessories to provide a solution for applications where exposure to high pressure cleaning, dust and extreme temperatures is an everyday occurrence. These harmony 22mm push buttons are used by machine manufacturers (automotive, textiles, timber) and control system panel builders. Certified and approved for meeting requirements throughout all continents: EN/IEC, UL, NEMA, CSA, CCC, Gost, JIS and many more. They have UL and CE markings and have ratings up to IP66 and IP69K.

The 3VA11 model from the IEC molded case circuit breaker series features a thermal-magnetic trip unit suitable for low voltage applications. This device operates with a frame size of 3VA11 and a low breaking capacity (Class N), achieving a rated short-circuit breaking capacity (Icu) of 25kA at 415V and 7kA at 690V. The device is equipped with a TM240 trip unit that allows for adjustable overload protection settings, with an overload release current adjustable between 44A and 63A and short-circuit protection settings ranging from 5 to 10 times the nominal current (In). Special features include front-side frame clamp electrical connections and an optional motor drive. The circuit breaker is suitable for DIN rail mounting and has a degree of protection classified as IP40. With overall dimensions of 4 x 5.1 x 3.5 inches, this built-in device provides reliable line protection and neutral protection at 100% capacity.

The 3VA41 circuit breaker is a low voltage molded case circuit breaker designed for reliable line protection. It operates with a thermal-magnetic trip unit and is rated for a permanent current of 15A. This model provides a breaking capacity of 25kA at 480V and 14kA at 600Y/347. The device is constructed with a standard Class S breaking capacity and is equipped with lugs installed exclusively on the load side.With dimensions of 3 x 5.5 x 3.7 inches, the circuit breaker is suitable for installation on a DIN rail (top hat rail) and features a rocker lever as the control element. It does not include integrated earth fault protection or under voltage release, but it is a complete device with a protection unit.This product also has an IP40 degree of protection, making it suitable for various industrial environments while ensuring safety and reliability.

TeSys GB circuit breaker, 2 poles (1P+N), 2A/250V IEC/277V UL, for the protection of industrial equipment control circuits. It provides thermal magnetic protection with a magnetic tripping level at 26A (13 In) and breaking capacity Icu 15kA@240V. It can also be used for protection of DC loads up to 2A/48V DC-13 with a breaking capacity Icu 1.5kA@24V. Compact device (30mm wide), mounting on 35mm DIN-rail, control by toggle lever (start-stop guaranteed for 8000 cycles). Sold in lots of 3 units. Multi standards certified (IEC, UL, CSA), Green Premium product (RoHS/REACh).

SENTRON, Switch disconnector 3LD, emergency switching-off switch, 4- pole, 16 A, operating power at AC-23 A at 400 V: 7.5 kW, molded-plastic encapsulation for metric cable gland, rotary operating mechanism, red/yellow

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 4.21 inches deep. It weighs 1.29 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This is a standard motor mechanism for Compact NSX 250 and PowerPact Multistandard J frame devices that allows automatic device spring-charging. It helps the circuit breaker to feature a high mechanical endurance as well as easy and sure opening or closing operations. It provides a double insulation of the front face and all indications remain visible and accessible. The control voltage of this motor mechanism module is 24VDC to 30VDC. The consumption is less than 500W. Padlocking of the device remains possible. The motor mechanism is supplied with SDE adapter.

TeSys GB circuit breaker, 2 poles (1P+N), 5A/250V IEC/277V UL, for the protection of industrial equipment control circuits. It provides thermal magnetic protection with a magnetic tripping level at 66A (13 In) and breaking capacity Icu 2kA@240V. It can also be used for protection of DC loads up to 5A/48V DC-13 with a breaking capacity Icu 1.5kA@24V. Compact device (30mm wide), mounting on 35mm DIN-rail, control by toggle lever (start-stop guaranteed for 8000 cycles). Sold in lots of 3 units. Multi standards certified (IEC, UL, CSA), Green Premium product (RoHS/REACh).

The MasterPact MTZ2 25H3 serves as a foundational frame for a three-pole drawout circuit breaker, delivering reliable protection for electrical systems against overloads, short circuits, and ground faults. With a rated current of 2500A at 40°C, this unit is engineered to operate within a maximum voltage of 440VAC at frequencies of 50/60Hz. The circuit breaker features a breaking capacity (Icu) rated at 150kA at both 220/415VAC and 440VAC for 50/60Hz, ensuring robust performance in demanding environments. The frame is to be used with the compatible MicroLogic X control unit, which must be ordered separately, allowing for enhanced safety and energy efficiency. Further, the unit adheres to international standards including IEC/EN 60947-1 and IEC/EN 60947-2, making it suitable for a wide range of applications. The physical dimensions of the frame are 441mm (W) x 439mm (H) x 403mm (D). This circuit breaker is designed for drawout mounting and features a control type of push-button, facilitating straightforward operation.

The circuit breaker frame is designed for the MasterPact MTZ2 10H1 model, facilitating the drawout mechanism. With a rated current of 1000A, this frame operates at a maximum voltage of 690VAC for 50/60Hz systems. The notable breaking capacity (Icu) of 66kA rms is applicable at 415VAC and extends across various voltage levels including 440VAC and 690VAC, ensuring robust protection against overloads and short circuits.This unit is compatible with MicroLogic X control units, which must be purchased separately. It measures 441mm in width, 439mm in height, and 403mm in depth when equipped with a chassis, or 378mm in width and 300mm in depth without it. The device complies with international standards such as IEC/EN 60947-1 and IEC/EN 60947-2, ensuring its reliability in power distribution applications.

The Enclosed Disconnect Switches 30103D are industrial-grade devices intended for use in indoor environments. This switch features a three-pole configuration and is rated for a maximum load capacity of 30 amperes at 600 volts AC. The unit operates with pressure terminal screws, ensuring reliable connectivity. Constructed from aluminum and housed in a NEMA 1 enclosure, these switches are suitable for standard toggle applications. They are designed for a minimum of 10,000 operating cycles, maintaining functionality even under continuous operation at temperatures as low as -40 degrees Celsius without impact. This model is categorized as a non-fused disconnect switch, making it ideal for various motor disconnect applications.

The DRW270730LT Relay features two CO contacts with a test button, utilizing AgCdO technology. It operates at a rated control voltage of 230 V AC with a continuous current rating of 16 A. The relay has flat blade connections measuring 4.8 mm x 0.5 mm, ensuring compatibility with various wiring setups.The device includes a lockable test button and a mechanical switch position indicator. With a compact design measuring 36 mm in width and height, and a depth of 48 mm, it weighs 81.5 g. The relay is compliant with several standards, including CE, cURus, and EAC, and is rated under UL File Number E312083.In terms of performance, the relay supports an inrush current of 80 A for 50 ms, with an AC switching capacity of up to 6400 VA and a DC capacity of 384 W at 24 V. The maximum switching voltage for AC is 400 V, while for DC it is 250 V. The switch-on and switch-off delays are both less than 20 ms. It operates effectively within a temperature range of -40 °C to 60 °C and a humidity level of 35% to 85%.Insulation coordination is in accordance with EN 61810-1:2008, rated for 400 V, and features a protection degree of IP20. The dielectric strength between input and output is maintained at 2.5 kVeff for one minute, ensuring reliable operation under varying conditions.