Niederspannungsschaltanlagen

The SIRIUS Safety Relay Output Extension 4RO is a robust solution designed for enhanced safety in automation systems. This relay incorporates relay enabling circuits, providing four normally open (NO) contacts and one normally closed (NC) contact. The relay signaling circuit further enhances the functionality of this device, making it an ideal choice for applications requiring precise control over electrical circuits. Key Features: Relay enabling circuits for reliable operation Four normally open (NO) contacts and one normally closed (NC) contact 24V DC spring-type terminal (push-in) for easy connection

This red pilot light head is specifically designed for universal LED applications. It boasts a durable metal bezel, ensuring high impact and vibration resistance. The IP66 rating guarantees its resistance to dust, water, and vibrations. This head fits into a standard 22mm cutout, making it compatible with pre-existing machinery. Its operating temperature range of -40°C to 70°C allows for versatile usage across different environments. The product is certified and approved according to various international standards such as EN/IEC, UL, NEMA, CSA, CCC, Gost, JIS, and many more. UL and CE markings are present on the product, along with ratings up to IP66 and IP69K. This pilot light head is ideal for applications requiring high impact and vibration resistance. It is suitable for use in various industries including automotive, textiles, timber, and control system panel building.

The TMP MON REL is a temperature monitoring relay that utilizes a PT100 sensor for accurate temperature measurement. It is designed to measure temperatures ranging from 0 to 100 degrees Celsius, with a control voltage of 120 V AC.This relay is equipped with a spring-loaded terminal and operates on the principle of quiescent current. It features a width of 22.5 mm and offers both Normally Open (NO) and Normally Closed (NC) contacts.Please note that this product has been phased out, and its preferred successor is the 3RS2500-2AW30.

This product is a round plastic enclosure designed for command devices. It measures 22mm in diameter and is made from plastic material. The top part of the enclosure is yellow. Inside, there are two control points made of plastic. One of these points has an indicator light that is red and uses LED technology with a voltage of 24V. The light is powered by screw terminals, and it comes without any inscription on its label. The other control point acts as an emergency stop, which rotates to unlatch when activated. This point also lacks an inscription on its label and has a screw terminal for powering it. The enclosure is designed for floor mounting and includes M20 screw terminals on both the top and bottom parts.

The EMG 17-REL/SG-B 24/21/P relay module integrates a soldered-in remanence miniature switching relay, suitable for a variety of load sizes. It is equipped with positive switching diode wiring and operates on a nominal input voltage of 24 V DC, with a voltage range of 19.2 V DC to 26.4 V DC at 20 °C.This device features one changeover contact made from AgSnO and supports a maximum switching voltage of 250 V AC/DC. The module is designed for versatile applications, boasting a mechanical service life of approximately 10 million cycles and operates reliably across a temperature range of -40 °C to 50 °C.With an input current of approximately 8 mA at nominal voltage, it provides a typical response time of 5 ms and a release time of the same duration. The relay supports a limiting continuous current of 5 A and a maximum inrush current of 6 A. Installation is facilitated through screw connections, accommodating conductor cross-sections from 0.2 mm² to 4 mm² for rigid conductors and up to 2.5 mm² for flexible conductors.The module is compliant with DIN EN 50178 standards and is designed for DIN rail mounting, allowing for flexible positioning. Its reinforced insulation and EMC class A compliance ensure safe operation in diverse environments.

The MasterPact MTZ2 10H1 serves as a fundamental frame for 4-pole drawout circuit breakers. Capable of handling a rated current of 1000A, this model offers a maximum operational voltage of 690VAC at 50/60Hz. The breaking capacity (Icu) reaches 66kA rms at 415VAC under the same frequency conditions. This frame is compatible with various MicroLogic X control units, which are sold separately, and must be paired with the appropriate chassis, also available separately.Designed for protection against overloads and short circuits, the MasterPact MTZ series incorporates advanced digital technologies, enhancing safety and energy efficiency. The dimensions of the frame are 556mm in width, 439mm in height, and 403mm in depth when fitted with the chassis. It complies with international standards including IEC/EN 60947-1 and IEC/EN 60947-2, ensuring reliability in diverse applications.With a mechanical durability rated for 25,000 cycles and electrical durability of 10,000 cycles at 440V AC, the device can operate efficiently in environments with ambient temperatures ranging from -25°C to 70°C. Additionally, the product is designed to operate at altitudes up to 2000 meters without derating.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 115 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The SB aR fuse-link is designed for high-performance applications, providing protection for power conversion equipment at a rated voltage of 690VAC IEC and 700VAC UL. This variant, size 33, is capable of handling an impressive current rating of 1000A and demonstrates a maximum interrupting capacity of 200kA.Engineered specifically for the protection of semiconductors, including diodes, thyristors, and IGBT devices, this fuse-link features a robust construction with die-cut elements embedded in solidified sand, effectively controlling arcing characteristics. The low I²t clearing value of 990 kA²s and melting I²t of 170 kA²s enhance performance during fault conditions.All contact surfaces are silver-plated, ensuring optimal conductivity, while the non-magnetic hardware contributes to reliable operation. Additionally, the fuse-link can be fitted with a low voltage trip-indicator to activate a field mountable microswitch, facilitating greater operational safety. It is suitable for bolted mounting and is made with a ceramic insulating body material.

VBF5 is a 3-pole TeSys Vario switch-disconnector from Schneider Electric for main switching in motor applications 37kW@400V AC-23. For door mounting with 4 screw fixing, it provides a black & grey operator with IP65 protection. VBF5 is a 3-pole TeSys Vario switch-disconnector from Schneider Electric for main switching in motor applications 37kW@400V AC-23. It consists of a V5 Vario switch body and a padlockable black & grey operator to be mounted on door with 4 screws fixing. It ensures an IP65 protection to the mounting. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Vario 3-pole rotary switch disconnector for door mounting. Composed with a switch body V5 and a long black & grey operator, for main switching, padlockable. Ensures an IP65 protection to the mounting. Rated for 690V AC operation, DC operation is permitted until 250V, performance depending on the number of contacts in series. Possible attachment of 2 add-on poles (1 in each side) , neutral (VZ13), earthing (VZ16), auxiliary (VZ7, VZ20).

This Extra Heavy Duty Industrial Toggle Switch is designed for general purpose AC applications, featuring a single pole configuration and a black toggle handle. With a rating of 20A and operating voltages of 120/277V AC, this switch is built to meet rigorous industrial standards.It supports back and side wiring, accommodating wire sizes from #14 AWG to #10 AWG, making it versatile for various installation needs. The switch is capable of withstanding a dielectric voltage of at least 1500V AC for one minute and has a maximum continuous current of 20A. Its operating temperature ranges from -40°C to 75°C, ensuring reliability under extreme conditions.Compliance with UL 20 and CSA standards, along with NEMA WD1 requirements, guarantees the safety and performance of this component. The switch exhibits a flammability rating of UL 94V-2, making it suitable for demanding environments.

The circuit breaker features a thermal magnetic trip unit and is engineered to protect electrical systems against overloads and short circuits. With a breaking capacity of 14kA at 600VAC, this device ensures reliable operation within its rating limits. The PowerPacT H variant is designed for I-Line applications, allowing for straightforward installation and maintenance.It includes I-Line terminations on the line side along with mechanical lugs on the load side. This breaker operates continuously at 80% of its rated current, specifically within an ABC phase connection. The construction adheres to multiple standards including UL, CSA, NOM, and IEC, ensuring compliance and safety for various applications.Additional features include a dual-break rotating contact mechanism that minimizes peak current during faults and an integral push-to-trip button for manual tripping. The circuit breaker is rated for a maximum ambient temperature of 70 °C and supports operating altitudes up to 6561.68 ft (2000 m) without performance derating. It is also equipped with a toggle control type for user-friendly operation.

The plug-in relay operates at a coil control voltage of 230V AC and includes 2 changeover contacts (DPDT) with a current rating of 15A. It is designed with an LED indicator that provides a clear status display, facilitating monitoring in various lighting conditions. This model is compliant with IP40 standards, ensuring protection against solid objects greater than 1 mm.With a wide operational temperature range of -40 to 55 °C, the relay maintains functionality in extreme conditions. It features a lockable test button for enhanced control during testing and maintenance. The electrical durability is rated for up to 100,000 cycles under resistive load, while the mechanical durability extends to 10 million cycles. This reliability supports integration into hard-wired logic automated systems and enhances the efficiency of industrial programmable logic controllers (PLCs).The relay's dielectric strength is impressive, rated at 1500 V AC between contacts and 2000 V AC between the coil and contacts. It also meets various safety and environmental standards, including CSA, UL, and IEC certifications, making it suitable for diverse industrial applications. The status LED is particularly effective for signaling operational status day and night, ensuring that users can easily monitor relay conditions.

Solid State Contactor,SIRIUS SC 1 Pole 20 Amps at 24 VAC to 230 VAC 24 VDC Coil DIN Rail or Panel Mount Spring-loaded Terminals 22.5 mm Relay Width 22.5mm Heat Sink Width Zero-Point Switching UL File E143112 in Vol.1 Sec.8

TeSys Deca contactor, 3 poles (3NO), for switching 3-phase capacitor banks up to 63kVAR@400V 50Hz (104kVAR@690V). It provides a 220V 50/60Hz AC coil, 1NO+2NC instantaneous auxiliary contacts, with front mounted early make poles and pre-wired damping resistors for current limitation. For operating rates until 240 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA) and compliant with shunt capacitors standard IEC 60831, Green Premium product (RoHS/REACh).

Altivar 71 Variable Frequency Drives are for constant torque applications from 1 to 700 HP. For the latest in high performance drives for heavy duty applications consider using an Altivar Process ATV900 family drive. Its protection index is IP54. This terminal is used to locate the Human-Machine Interface of the Altivar drive remotely on the door of an enclosure. Its maximum operating temperature is 50 °C. It provides a pixel resolution of 240 x 160 pixels. It weighs 180g. It is used to control, adjust and configure the drive, display the current values (motor, input/output values, etc), save and download configurations, 4 configuration files can be saved. A remote-mounting cordset VW3A1104Rxx is also required, to be ordered separately.

The plug-in relay is designed for a coil control voltage of 48V DC and incorporates a single changeover contact (SPDT) rated at 10A. With a width of just 16mm, it facilitates efficient use of space within enclosures, thereby enhancing machine reliability. This relay is compatible with hard-wired logic systems, complementing the functions of industrial programmable logic controllers (PLCs).Incorporating a lockable test button and an LED status indicator, the relay ensures clear visibility of operational status in various lighting conditions. The device supports a wide range of applications, allowing for versatile mounting options. Its operational reliability is underpinned by a dielectric strength of 1000V AC between contacts and 5000V AC between the coil and contact, ensuring safe and effective operation even under demanding conditions.The relay is built to endure, with a mechanical durability rating of 10 million cycles and an electrical durability of 100,000 cycles at 55°C for both normally open and normally closed resistive loads. Compliance with multiple standards, including CSA and UL, confirms its suitability for a variety of industrial applications.

This relay module is designed for 24 V AC applications, offering 2 CO contacts that utilize AgNi 90/10 material. The module includes a test button and is rated for a continuous current of 8 A, ensuring reliable performance in demanding environments.With compact dimensions of 15.8 mm in width, 98 mm in height, and 69.6 mm in depth, the unit is suitable for installation on a TS 35 rail. It features a mechanical service life rated for AC coils at 5 x 106 switching cycles and DC coils at 10 x 106 switching cycles, supporting long-term durability.Connection is facilitated via a PUSH IN method, accommodating wire cross-sections from 0.75 mm² to 1.5 mm². The device is equipped with a red LED status indicator, allowing for easy monitoring of operational status. The rated switching voltage is 250 V AC, with a maximum switching voltage of 400 V and an inrush current capability of 15 A.Compliance with various standards is ensured, including CE and DNV GL certifications. Environmental considerations are addressed, with operating temperatures ranging from -40 °C to 70 °C, and a humidity tolerance of up to 93% relative humidity. The product also meets insulation coordination standards, featuring a dielectric strength of 5 kV between input and output.Designation Code: RCI

The 3VA21 circuit breaker is designed for low voltage applications and adheres to IEC standards. It features a very high breaking capacity, classified as Class C, with a rated current of 25A and an impressive breaking capacity of 110kA at 415V. This device is equipped with an ETU850 electronic trip unit that includes an LCD display for metering functions.With dimensions of 4.1 x 7.1 x 4.2 inches, this circuit breaker is compact yet powerful. It operates at a rated voltage of up to 690V and incorporates a frame clamp connection on the front side. The overload protection settings range from 10A to 25A, while the short-circuit protection can be adjusted between 0.6 to 10 times the rated current. This circuit breaker also allows for optional connection via an external current transformer for conductor protection, which can extend up to 160% of the rated current.Furthermore, the device is designed for fixed built-in installation and is suitable for DIN rail mounting. It does not include integrated earth fault protection or under voltage release features, but it does come complete with a protection unit.

This temperature monitoring relay is equipped with a PT100 sensor for accurate temperature measurement. It operates within a range of 0 to 100°C, making it suitable for a wide variety of applications. The relay is designed to operate at a control voltage of 110/230VAC and features screw terminals for easy installation. This product is no longer in production, and the recommended successor is the 3RS2500-1AW30.

The Siemens BREAKER 3VA6 COM100 Data Server is a crucial component for automation systems. This data server accepts various communication protocols such as PROFIBUS DP, PROFINET, and RS485 modules, enabling seamless integration with one 3VA breaker.This device is designed to enhance the functionality of your automation setup by providing a reliable and efficient means of data transmission. The COM100 interface ensures compatibility with a wide range of devices, making it an ideal choice for diverse industrial applications.