Netzgeräte & Leistungsregler

This Altivar 340 variable speed drive can feed 3-phase synchronous and asynchronous motors in open and closed loop control. Altivar Machine ATV340 drives are sized heavy duty as standard. It works at a rated power up to 2.2kW / 3hp and a rated voltage from 380V to 480V AC. ATV340 has been designed to meet the needs of applications for harsh environments, such as vibration, shock and non-conductive dust and where high temperature resistance up to 60 °C is needed. This product integrates Modbus serial line communication protocols as standard. This drive features multi-protocol Ethernet embedded, it consists of Ethernet IP and Modbus TCP communication interfaces. it weighs 1.8kg and its dimensions are, 85mm wide, 270mm high, 232.5mm deep. ATV340 incorporates functions and features suitable for the most common applications, including packaging, material handling, material working, hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is also CE, UL, CSA, and TÜV certified. Accessories and options (encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters) are available with Altivar Machine ATV340 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Modicon X80 Power Supply Module is a crucial component in the Modicon X80 system. It delivers power to each Modicon X80 I/O rack and the modules installed within it. The module operates at 24V to 48V DC, ensuring reliable and efficient power supply.The module is housed in a robust case that offers IP 20 protection for the internal electronics. This ensures the safety of the components while maintaining optimal functionality.

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). This ATV320 drive can feed 3-phase synchronous and asynchronous motors. It works at a rated power up to 4kW, and a rated voltage from 380V to 500V. Altivar high IP offers washable drives for harsh environments, if users want to clean the dust and chemical pollution outside of drives. It is delivered without fan, with embedded EMC C2 filter and it provides IP65 protection. It integrates as standard Modbus and CANopen communication protocols with access via the RJ45 connector on the front of the drive. It weighs 8.2kg. The drive software includes 5 safety functions that help machines meet safety requirements. These safety functions are configured using SoMove software. This Altivar Machine ATV320 is designed for conveyors, carton packers, gantry cranes, woodworking, metal processing, fans, Food & Beverage industry. It conforms to IEC, UL, TUV, KC and other international standards. EcoStruxure Machine software compatibility enables developping, configuring and commissioning the entire machine in a single software environment, including logic, motion control, HMI and related network automation functions. It is delivered in 2 packages. ATV320 can be installed alone or side by side in a multi-drive configuration. The Altivar Machine ATV320 series focus on easy integration for simple and advanced machine requirements with proven motor control and connectivity. ATV320 drives are specifically designed for material handling, packaging, textiles, hoisting, mechanical actuators, and material working.

The SIMATIC S7-1500 F-DQ 8x 24 V DC 2A PPM PROFIsafe is a specialized fail-safe digital output module designed for safety-oriented applications within the SIMATIC S7-1500 automation system.With 8 channels providing 24V DC output at up to 2A, this module ensures reliable and safe control of safety-related actuators.

The SINAMICS V20 is a robust and efficient AC motor drive that offers a rated power of 0.12 kW with an overload capacity of up to 150% for 60 seconds. This unfiltered device is designed to handle a voltage range of 200-240V at frequencies between 47 and 63 Hz, providing a reliable solution for various industrial applications.The SINAMICS V20 features an I/O interface that includes 4 digital inputs (DI), 2 digital outputs (DO), 2 analog inputs (AI), and 1 analog output (AQ). This versatile device is compatible with both USS and MODBUS RTU fieldbus protocols, ensuring seamless integration into existing systems.The SINAMICS V20 comes with built-in BOP protection and a robust IP20 rating, making it suitable for use in various industrial environments. The open type size of the device is FSAA 68x142x108 (WxHxD), ensuring compact and efficient operation.

SINAMICS G120P LEISTUNGSMODUL PM230 MIT EINGEBAUTEM KL. B FILTER SCHUTZ IP55 / UL TYP 12 3AC380-480V +10/-10% 47-63HZ AUSGANG GERINGER ÜBERLAST: 22KW FÜR 110% 60S, 100% 240S UMGEBUNGSTEMPERATUR 0 BIS +40 °C(LO) 640 X 320 X 329 (HXBXT), FSD OHNE STEUEREINHEIT UND BEDIENEINHEIT ZUGELASSEN FÜR CU230P-2 FIRMWARE-VERSION V4.3.2

This TM221 controller is part of the Modicon M221 Logic controller range. It has 16 logic I/O and it is supplied with 24V DC. It is supplied with removable screw terminal blocks for connecting the I/O, a removable screw terminal block for connecting the power supply, a button cell backup battery BR2032 and a cable for connecting the analog inputs. M221 logic controllers have three types of integrated communication port, Ethernet, RS 232/RS 485 serial link and USB mini-B programming port. It enables the control of simple machines. The capacity of M221 logic controllers can be enhanced with the Modicon TM3 expansion module offer.

The SINAMICS g120c is a robust, high-performance drive system designed for industrial applications. With a rated power of 1.5KW and an overload capacity of 150% for up to 3 seconds, it delivers reliable performance under demanding conditions.The integrated filter class A I/O-interface provides six digital inputs (6DI), two digital outputs (2DO), one analog input (1AI), and one analog output (1AO). This ensures seamless communication and control in your industrial setup.Safety is a key feature of the SINAMICS g120c. It incorporates Safe Torque Off technology for enhanced safety, and it's equipped with integrated fieldbus PROFINET-pn protection. The IP20/UL open type design ensures durability and reliability in various environments.The SINAMICS g120c is compact, with dimensions of 173x73x178mm (HxWxD), making it suitable for a wide range of industrial applications. It's also designed to operate on external 24V power supply.

The SINAMICS G120C is a robust industrial drive motor with a rated power of 45.0KW and an overload capacity of 150% for 3 seconds. It operates at 3AC380-480V with a voltage tolerance of +10/-20%, within the frequency range of 47-63Hz.This motor is designed to be unfiltered, providing an I/O interface that includes 6DI, 2DO, 1AI, and 1AO. It also features a Safe Torque Off function for enhanced safety.The SINAMICS G120C is integrated with the PROFINET-PN fieldbus, ensuring seamless communication. It offers IP20/ UL protection and is of open type design. The motor's size is FSD 472x 200x 237(HXWXD), and it comes with an external 24V power supply.

SINAMICS g120 Leistungsmodul pm240-2 ungefiltert mit integriertem Brems-Chopper 3AC380-480V +10/-10% 47-63HZ Ausgabe hohes Überlast 1,1KW für 200% 3s,150% 57s,100% 240s Umgebungstemperatur -10 bis +50 Grad C Ausgabe niedriges Überlast 1,5KW bei 150% 3s,110% 57s,100% 240s Umgebungstemperatur -10 bis +40 Grad C 196 x 73 x 165 (HxBxT), fsa Schutz IP20 ohne Steuer- und Bediengerät, genehmigt für Firmware-Version v4.6

The Altivar Machine ATV340 is a heavy-duty variable speed drive designed for harsh environments, with a rated power of up to 15kW and a rated voltage from 380V to 480V AC. It features multi-protocol Ethernet embedded, Modbus serial line communication protocols as standard. This drive is suitable for applications requiring high temperature resistance up to 60 °C and can handle vibration, shock, and non-conductive dust. The ATV340 weighs 9.5kg and has dimensions of 180mm wide, 385mm high, and 249mm deep. It is designed for use in packaging, material handling, material working, and hoisting applications and conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions), IEC 60721-3, IEC 61508, IEC 13849-1. It is CE, UL, CSA, and TÜV certified. Accessories and options such as encoder interface modules, I/O expansion modules, communication modules, braking resistors, line chokes, additional EMC filters are available with Altivar Machine ATV340 drives depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV340 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

Altivar Machine ATV320 range is an offer of variable speed drives designed for Original Equipment Manufacturers (OEMs). Its compact form factor allows vertical stacking of drives inside machine frames It works at a rated power up to 7.5kW / 10hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. It weighs 2.2kg and its dimensions are 150mm wide, 232mm high, 172mm deep. Altivar Machine ATV320 meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to IEC, UL, TUV, KC and other international standards. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. The product is delivered in two packages. It is designed to be mounted in vertical position on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM). It is eco-friendly and complies with directives such as RoHS, WEEE, etc.relating to environmental protection.

The SINAMICS G120C motor is designed for high performance and reliability, delivering a rated power of 45.0KW with an overload capacity of 150% for 3 seconds.It operates at 3AC380-480V with a voltage tolerance of +10/-20% and frequency range of 47-63HZ, ensuring efficient and stable operation in various industrial applications.Equipped with an integrated filter class A I/O interface, the motor provides 6DI, 2DO, 1AI, and 1AO for seamless communication and control. The Safe Torque Off feature ensures safe operation during fault conditions.The motor is also equipped with a PROFINET-PN fieldbus for easy integration into automation systems. It offers IP20/UL open type protection, making it suitable for various industrial environments.With a size of FSD 472x 200x 237(HXWXD), the motor is compact and space-efficient. External 24V power supply ensures easy integration into existing systems.

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This cordset is an accessory of I/O module. The length of this cable is 3m. This product is robust, high quality and based on the latest innovative technology. It is furnished with 40-way connector for module side and free-end color-coded flying leads (conforming to DIN 47100) for electrical connection. It weighs 0.48kg. It is suitable for medium to large process applications. This cordset is compatible with Modicon X80 BMXART0414 and BMXART0814 analogue input module. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

Prisma iPM outlet grille plastic. 291 x 291 mm cut-out. External is 336 x 316 mm. Thermal management accessory. Compatible with Prisma iPM M side panel. Fixing mode by clips. Air flow is 350 m3/h. Injected thermoplastic (ASA PC). Grey RAL 7035 external part. IP30, IP54 and IP31 Protection.

The SINAMICS g120c is a robust motor control center with a rated power of 18,5KW and an impressive 150% overload for 3 seconds. This high-performance device operates at 3AC, 380-480V with a frequency range of +10/-20% from 47 to 63 Hz. It features an unfiltered I/O interface including 6DI, 2DO, 1AI, and 1AO for seamless integration into your system. The SINAMICS g120c also includes a safe torque off feature and integrated fieldbus PROFINET-pn protection, ensuring optimal performance and safety.With an IP20/UL open type design and dimensions of FSC 295x140x203(hxwxd), this device is compact and versatile. It also features an external 24V power supply for added convenience. The SINAMICS g120c is a reliable choice for industrial automation applications.

Das Elektronikmodul SIMATIC DP ist ein integraler Bestandteil des ET 200SP-Systems, das für Hochfrequenzanwendungen konzipiert ist. Er unterstützt F-DI 8x 24 V DC HF und zeichnet sich durch eine kompakte Breite von 15 mm aus. Dieses Modul wurde entwickelt, um strenge Sicherheitsstandards wie PLe (ISO 13849-1) und SIL3 (IEC 61508) zu erfüllen.Dieses Elektronikmodul ist nicht nur eine Komponente, sondern ein kritisches Element in der Gesamtsystemarchitektur der ET 200SP. Er nutzt die Leistungsfähigkeit der F-DI-Technologie, um eine effiziente Leistung zu liefern und gleichzeitig die Sicherheitsnormen einzuhalten. Das kompakte Design und die hohe Frequenzfähigkeit des Moduls machen es zur idealen Wahl für Anwendungen, die Präzision und Zuverlässigkeit erfordern.Zusammenfassend lässt sich sagen, dass das Elektronikmodul SIMATIC DP ein Beleg für das Engagement von Siemens ist, robuste, zuverlässige und sichere Lösungen zu liefern. Die Integration in das ET 200SP-System verbessert die Funktionalität des Systems und gewährleistet gleichzeitig die Einhaltung der Sicherheitsstandards der Branche.

This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It features 3 built-in RJ45 communication ports as standard, 1 Ethernet port, 2 serial ports. It works at a rated supply voltage from 380V to 480V AC. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 160kW / 250hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 132kW / 200hp for applications requiring significant overload (up to 150%). It weighs 82kg and its dimensions are, 320mm wide, 852mm high, 390mm deep. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. Accessories (fan kit, graphic display terminal) and options (I/O expansion modules, communication modules, EMC input filters) are available with Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.

Introducing the Polycarbonate (PC) Male Crimp Termination Inserts, a high-performance solution designed to meet the demands of modern industrial applications. These inserts are rated for a current of 10 A, making them suitable for a wide range of power distribution and control systems.The inserts feature a size of 24 B and come equipped with 108 contacts, ensuring reliable and efficient electrical connections. The polycarbonate (PC) material offers excellent durability and resistance to environmental factors, guaranteeing long-term performance.These Male Crimp Termination Inserts are available in a sleek RAL 7032 pebble grey finish, adding an aesthetic touch to your industrial setup. With their robust design and superior electrical performance, these inserts are the perfect choice for any demanding application.

This EtherNet/IP, Modbus TCP, and MD-Link dual port module communication module is an option for variable speed drives of Altivar range. It is equipped with 2 RJ45 connectors. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 20g.