Ventilblöcke & Verteiler

The PTFIX 6X1,5-G BU distribution block facilitates internal bridging through its conductor shaft, allowing for efficient connection configurations. It operates at a nominal voltage of 450 V and…

The AXL F BK PN functions as a bus coupler designed for PROFINET applications. With a transmission speed of 100 Mbps, it supports a maximum of 63 devices per station and can connect up to 63 local…

The 12X2,5-NS35 RD distribution block facilitates interconnection through conductor shafts, enabling bridging with compatible blocks. It operates at a nominal voltage of 690 V and supports a nominal…

The PTFIX 6/18X2,5 BN serves as a distribution block facilitating seamless bridging between blocks through its conductor shaft. It is designed to accommodate basic terminal connections, supporting a…

The Miniature Circuit Breaker (MCB) Multi9 C60BPR features a two-pole configuration with a rated current of 6A and a C tripping curve. It is designed to handle a short circuit breaking capacity of up…

The PTFIX 4/12X1,5 GY is a distribution block designed for efficient electrical connections. It supports a nominal current of 41 A and utilizes a push-in connection method, accommodating a rated…

The PTFIX 6X10/S-G BK distribution block is designed for reliable electrical connections with a nominal voltage rating of 450 V and a maximum nominal current of 57 A. Its push-in connection method…

This connection sub-base, designated as ABE7, is engineered for distributing power to four thermocouples. It effectively manages isolated sensor power supplies using a converter while providing…

This time delay auxiliary contact block is engineered for compatibility with contactors LC1D and control relays CAD. It includes a configuration of 1 normally open (NO) and 1 normally closed (NC)…

The PTFIX 6/6X2,5 WH is designed as a basic terminal block with supply capabilities. It supports a nominal voltage of 450 V and nominal current of 24 A. The connection method employs a push-in…

The test terminal strip, designated as UTRE 6-2/12 , operates at a nominal voltage of 400 V. It employs a screw connection method and is designed for single-level configurations. The rated cross…

The PotDis-TB-n.c.-G. PU 1 serves as a potential distributor module for the SIMATIC ET 200SP system. It features 18 Push-In terminals that are not connected, ensuring no linkage to P1, P2, or AUX…

The PTFIX 6X2,5-NS35 BK serves as a versatile distribution block, designed for vertical alignment and accommodating bridging with other blocks through its conductor shaft. Its nominal voltage rating…

The PT 4X1+F-BE serves as a base element for the protective plug PT, integrating a protective circuit for four signal wires. It includes a gas-filled surge arrester linking connections 3-4 (GND) and…

The single contact block from the Harmony XB4 series features PCB terminals, allowing for straightforward integration with Harmony XB4 and XB5 control and signaling units. This design facilitates…

The PTFIX 6X10/S RD serves as a distribution block designed for efficient electrical connectivity. Rated for a nominal voltage of 450 V and a nominal current of 57 A, it employs a push-in connection…

The PTFIX 12X1,5 OG distribution block enables efficient bridging between blocks via the conductor shaft. This component is equipped with a push-in connection method and supports a cross-section…

The PTFIX 4/18X1,5-NS15A BU distribution block is designed to handle a nominal current of 41 A, with a rated cross section of 4 mm². It supports conductor cross sections from 0.2 mm² up to 6 mm²…

This limit switch contact block features a double-pole configuration with two changeover (C/O) contacts that operate simultaneously. It is compatible with ZCKJ2 limit switch bodies, which can be…

The PTFIX 18X4-NS35A-FE distribution block is designed for efficient electrical connections, allowing for bridging between multiple blocks via the conductor shaft. The unit supports a nominal voltage…