Búsqueda de productos

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The System pro M compact S200 miniature circuit breakers are designed for current limiting. They incorporate two distinct tripping mechanisms: the delayed thermal mechanism for overload protection and the electromechanical mechanism for short-circuit protection.These circuit breakers come in various characteristics (B, C, D, K, Z), configurations (1P, 1P+N, 2P, 3P, 3P+N, 4P), breaking capacities (up to 6 kA at 230/400 V AC) and rated currents (up to 63A). All MCBs of the S200 range adhere to IEC/EN 60898-1, IEC/EN 60947-2, UL1077 standards, enabling their use in residential, commercial, and industrial applications.The bottom-fitting auxiliary contact can be installed on the S200 to save space by 50%.

The TeSys F AC coil is designed for 110V applications with a frequency range of 40 to 400Hz. It features a voltage code of F7, ensuring optimal performance within the specified voltage limits of 0.85-1.1 Uc and operating temperatures up to 70°C. This coil is compatible with TeSys F 3-pole and 4-pole contactors LC1 F400 and FG400, providing high operating rates of up to 3600 cycles per hour.The TeSys F AC coil is RoHS/REACh compliant and adheres to the Green Premium standard. It is intended to be used with a rectifier DR5TF4U (to be ordered separately).

2 x 1 co + 1 no, width 45 mm, 24 v to 240 V AC/DC, (sensor-dependent), -99 degrees c to 1800 degrees c 2 thresholds, digital, thermocouple j,k,t,e,n,s,r,b, in accordance with din 3440, temperature sensor/limiter

ISOLATING TRANSFORMERSAFETY INSTALLATION:SCREW; EN TERMINALS:SCREW CONNECTION; /B; W(%):4,2; IP00; TYPE OF PROTECTION CL.:I; TA/ISOKL:60 GR./SHIELD WNG.:II0 /0; F(HZ):50...60; VECTOR DC):24; ISEC(A DC):27; 400(415)-230(240)-200; USEC(V UPRI(V):575(600)-500-460(480)- PN(KW):0,648; POWER SUPPLY; PHASES:3;

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

SIMATIC ET 200SP. MultiFieldbus. 2-port interface module. IM 155-6MF High Feature. PN IO. Ethernet IP. Modbus TCP. 1 slot for BusAdapter. max. 64 I/O modules and 16 ET 200AL modules. multi-hot swap. optional cable grip. including server module

The SINAMICS Power Module PM240-2, unfiltered and equipped with an integrated braking chopper, is designed for 200-240V AC power supply at a frequency of 47-63Hz. This module offers high overload capabilities: it can handle up to 5.5kW at 200% load for 3 seconds, 150% load for 57 seconds, and 100% load for 240 seconds. The ambient temperature range is between -10°C and +50°C. For lower overload situations, the module can handle up to 7.5kW at 150% load for 3 seconds, 110% load for 57 seconds, and 100% load for 240 seconds with an ambient temperature range of -10°C to +40°C. The module has dimensions of 411mm x 200mm x 171mm (HxWxD) and offers a degree of protection IP20-PT without the Control Unit and operating unit. It is released with CU firmware version V4.6.

The SIMATIC dp is an electronic module designed for use in the SIMATIC ET200S system. It features 4SI IO-Link and 4 point-to-point interfaces, making it a versatile solution for various applications.Key Specifications:Width: 15mmIO-Link Master: YesThis module is perfect for those who need a reliable and efficient way to connect their devices in the ET200S system. Its compact size and robust design make it an ideal choice for industrial automation projects.

The RCCBs F200 series assures protection to people and installations against fault current to earth. A large offer for standard instantaneous and selective AC and A types is completed with some configurations for special applications.

The PSR softstarter series is a reliable and space-saving starting solution that offers basic yet effective features such as soft start and stop. It is ideal for applications where frequent starts are required, making it perfect for installations with limited space.Key Benefits:Compact sizeAbility to perform multiple starts per hourReduces energy loss at full speed with built-in bypassMain Features:Rated operational current: 3 to 105 AOperational voltage: 208–600 V ACControl supply voltage: 24 V AC/DC or 100–240 V AC

The TA200DU-150 thermal overload relay is designed to provide efficient protection for the main circuit. It offers reliable and swift protection in the event of motor overload or phase failure. With a trip class of 10A, this device is equipped with temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function, and a trip indication. The overload relays are directly connected to the block contactors. Single mounting kits are available as an accessory.

The SINAMICS S120 converter Power Module PM340 is a compact and efficient component designed for single-axis applications within the modular SINAMICS S120 drive system.This power module accepts a 3-phase AC input of 380-480 V at 50/60 Hz.

Introducing the Circuit Breaker VL CG 60A T/M 3P 35KA W/O LUGS, a high-performance electrical safety device. This circuit breaker is designed to meet UL489 standards and offers a breaking capacity of 35KA at 480V (molded case circuit breaker). The VL CG 60A T/M 3P 35KA W/O LUGS is equipped with an overcurrent release mechanism, providing system protection. It features a LI function with a temperature limit of 40 degrees Celsius and a rated current of 60A. The short-circuit protection rating is 600A, ensuring optimal performance under high load conditions. This circuit breaker comes without connection accessories or auxiliary release/alarm switch, making it ideal for applications where space is limited. It's a reliable choice for electrical systems requiring robust overcurrent protection and system safety.

The SIRIUS soft starter is a versatile solution designed for various industrial applications, offering a range of values at 575 V and 50 °C standard: from 68 A to 118 A, with power ratings ranging from 50 hp to 100 hp. This starter is compatible with both 400-600 V AC and 115 V AC power supplies, making it suitable for a wide range of industrial environments.The SIRIUS soft starter features screw terminals, which are designed to provide reliable electrical connections. These terminals can handle a voltage range of up to 600 V AC and temperatures of up to 50 °C, ensuring optimal performance in various operating conditions.

They measure fill levels, heights and sag without making contact. Because they are universally applicable, they work independently of color and surface texture. High resolution, high ranges and small blind spots guarantee the utmost precision. The ultrasonic sensors are distinguished by their voltage or power output and variants with an additional switching output.

This Harmony 9001K, modular illuminated projecting red push button is supplied with contact block. It has a chromium-plated metal bezel, is supplied with a 110V AC/DC integral LED and has 1 x NO + 1 x NC contacts. This illuminated push button with integral LED provides an ergonomic and visual interface for controlling your machines. It is easily installed into a standard 30mm diameter panel cut-outs and connected to control circuits with classic screw-clamp connections. It is clearly distinguishable visually at a distance thanks to its illuminated head and clear color. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66, making it ideal for operation in harsh environments. Impact and corrosion resistant metal bezel and body ensures product continues to operate even after severe accidents.

CIRCUIT BREAKER VL 150X UL, TYPE CG (CAT NO. NCX3B050) NON-INTERCHANGEABLE FRAME W/APPROVAL CIRCUIT BREAKER TO UL489 HIGH BREAKING CAPACITY 3-POLE, NEMA RATING 65KA/480V (MOLDED CASE CIRCUIT BREAKER) OVERCURRENT RELEASE TM, LI FUNCTION TU=40DEGR CELSIUS IN= 50A RATED CURRENT II=600A SHORT-CIRCUIT PROT. IR=50A OVERCURRENT RELEASE FOR SYSTEM PROTECTION W/O CONNECTION ACCESSORIES WITHOUT AUXILIARY RELEASE WITHOUT AUXILIARY/ALARM SWITCH

El interruptor de seguridad de servicio pesado de la marca Square D™ by Schneider Electric está diseñado para ser resistente, confiable y proporcionar un rendimiento excepcional en las condiciones más agotadoras. Los interruptores de seguridad de la serie F ofrecen niveles significativamente más altos de resistencia mecánica que los estándares NEMA KS-1 o UL98. Todos los interruptores de seguridad de servicio pesado cuentan con un mecanismo de operación de apertura rápida, un enclavamiento de doble cubierta y una manija indicadora codificada por colores.Este interruptor de seguridad de un solo tiro tiene una corriente nominal de 30 A y está listado por UL con una clasificación de protección NEMA 1. Este interruptor tiene clasificaciones de voltaje operativo de 240VAC y 250VDC. El recinto está hecho de acero y tiene un neutro (instalado de fábrica). Esta desconexión fusible tiene una corriente nominal de cortocircuito de 10 kA a 200 kA. Este interruptor de seguridad acepta los tipos H, J, K, L, Rfuse y se monta en superficie.

MÓDULO DE POTENCIA SIN FILTRO SINAMICS G120 PM230 PROTECCIÓN IP20 3AC380-480V +10/-10% 47-63HZ SALIDA BAJO SOBRECARGA: 22KW PARA 110% 60S, 100% 240S TEMPERATURA AMBIENTE 0 A +40 GRADOS C (LO) 419 X 275 X 204 (HXWXD), FSD SIN UNIDAD DE CONTROL Y PANEL APROBADO PARA CU240B/E-2 Y CU230P-2 VERSIÓN DE FIRMWARE V4.4 NOTA: PM230 NO SOPORTA SEGURIDAD