Accesorios

The D-SUB contact insert, designated as CUC-DSI-Y1STZ-A/DSLSA15:50, is specifically constructed for PCB mounting applications. This model is characterized by its socket-type contact configuration and includes 15 signal contacts. The insert is designed for angled installation and is secured using 4-40 UNC threads along with solder pins, compatible with the VS-15-... panel mounting frame.Manufactured in Germany, this component adheres to the overvoltage category III, with a rated voltage of 125 V and a rated current of 5 A. The product's dimensions are 39.3 mm in width, 17.3 mm in height, and 21.6 mm in length. Its housing is made of metal, while the contacts are composed of a copper alloy with a hard gold plating over nickel, ensuring reliable connectivity. The contact carrier is made from polyester GF, and the component meets the flammability rating of V0 according to UL 94.

The Device Connector Front Mounting, designated with the code ST-7ES1N8AWQ00S, is designed for standard and SPEEDCON interlock applications. It features a straight configuration with a total of 8 positions, including 7+PE, and employs a crimp connection method.The connector is shielded and utilizes a flange with dimensions of 21.6 mm x 21.6 mm, ensuring a secure fit. With an IP67 degree of protection, it is suitable for various environmental conditions, allowing operation in temperatures ranging from -40 °C to 125 °C. The housing is constructed from GD-Zn, while the rotating parts are made of CuZn, and the insulating body is comprised of PA 6.6.Notable specifications include a nominal current of 14 A and a nominal voltage of 630 V, with an overvoltage category of III and a rated surge voltage of 6 kV. It is important to note that connectors should not be plugged in or disconnected under load to prevent damage.

The EH 22,5 F-C SS/ABS GY7035 serves as the upper component of a DIN rail housing, characterized by its flat design and a single connection opening on one side. With precise dimensions of 22.6 mm in width, 75.26 mm in height, and 36.95 mm in depth, this housing is finished in light grey (RAL 7035).Manufactured from ABS material, it complies with the flammability rating of HB as per UL 94 standards. It offers a maximum of 4 positions with a pitch of either 5 mm or 5.08 mm. The housing’s design includes ventilation openings and is suitable for various temperature ranges, supporting operational conditions from -40 °C to 80 °C.In terms of assembly, it utilizes a snap-in mounting type and can accommodate PCBs through a slot configuration. The product is packed in cardboard, with the outer packaging in carton form, ensuring safe transport and storage. The ambient temperature for storage and transport is maintained between -40 °C and 55 °C, while relative humidity can reach up to 95%.

This socket integrates a pin connector pattern of type CF with a push-in spring connection, accommodating conductor cross-sections from 0.2 mm² to 4 mm² for solid conductors and 0.2 mm² to 2.5 mm² for flexible conductors. It is suited for mounting on a DIN rail in service interfaces or for direct mounting applications. The operating temperature range is between -20 °C and 60 °C, ensuring reliable performance under various environmental conditions.Compliance with VDE 0620-1 underscores its adherence to established standards, while its flammability rating of V0 according to UL 94 indicates a high level of fire resistance. This product also meets environmental compliance standards, including China RoHS, allowing for an unlimited environmentally friendly use period.

The integrated drive ILA is designed for motion control applications and operates with a 6-pole AC synchronous servo motor. It utilizes an EtherNet/IP communication interface for seamless integration. This model supports a rated supply voltage range of 24V to 48V DC, with a peak current consumption of 8500 mA and a nominal speed of 3400 RPM at 48V. Such specifications enable high-speed rotation and medium torque, ideal for various industrial sectors including printing, packaging, and electronics manufacturing. Measuring 207.8 mm in length and 57 mm in width, the drive has an IP41 rating for the shaft bushing and IP54 for the entire unit, ensuring adequate protection against dust and water. It includes an industrial connector for reliable electrical connections and has a weight of 1.7 kg. The product features a multiturn encoder with a resolution of 16384 points per turn and 4096 turns, facilitating precise motion control. Compliance with multiple standards such as EN/IEC 61800-3 and IEC 60072-1 ensures its reliability and safety in operational environments. The drive supports various operating modes that can be configured via the communication bus, including electronic gearbox and speed profile modes. The product is rated for operation in ambient temperatures up to 55 °C without derating and can withstand shock resistance of up to 150 m/s². The ILA integrated drive combines motor, positioning controller, power electronics, fieldbus, and safety functions within a single device, enhancing the efficiency of decentralized motion solutions.

The LS-EMLP-AL (60X15) BK device marker is constructed from aluminum, featuring a black unlabeled surface that can be customized with TOPMARK NEO or TOPMARK LASER. The adhesive mounting type allows for versatile installation, and it provides a lettering field dimension of 60 x 15 mm. This marker includes a total of 16 individual labels, ensuring ample supply for various applications.With dimensions of 59.7 mm in width and 14.8 mm in height, this marker meets stringent wipe resistance standards as per DIN EN 61010-1 (VDE 0411-1). It is designed to operate effectively in ambient temperatures ranging from -25 °C to 70 °C and is recommended for storage at 23 °C with 50% relative humidity. The adhesive strength is rated at 250 µm with a foil thickness of 800 µm, ensuring durability and reliability in various environments.The marker is compliant with ISO 20653:2013-02 specifications and has been tested for resistance against multiple solvents and conditions, including isopropanol and ethanol, demonstrating its robustness under various exposure scenarios.

This product comprises a set of 10 symmetrical DIN rails, each measuring 400mm in length, specifically designed for installation in PanelSeT SBM enclosures. The rails are manufactured from zinc-coated steel with a thickness of 1mm, providing durability and resistance to corrosion. With a nominal width of 385mm and fixing centers width of 364mm, these rails ensure compatibility with various mounting requirements. The dimensions include a depth of 7.5mm and a height of 35mm, making them suitable for multi-purpose applications. The net weight of a single rail is 0.13kg. This product is classified under the green premium status, indicating minimal use of hazardous substances, and complies with RoHS regulations, ensuring environmental safety. The rails are fixed in place using Ø5mm self-tapping screws at the rear of the enclosure, allowing for secure and reliable installation.

The Panel Feed-Through ST-8EP1N8ACK04S is designed for robust applications, featuring a straight layout and SPEEDCON locking. It supports a connection profile of 5+3+PE, utilizing a pin-type contact method. The flange dimensions measure 25.75 mm x 25.75 mm, ensuring compatibility with standard mounting requirements.This component is shielded and offers a degree of protection rated at IP67, making it suitable for environments exposed to dust and moisture. The cable diameter range of 9 mm to 11 mm allows for versatile installations, while the crimp connection method ensures reliable electrical performance.Further specifications include a nominal current rating of 3.6 A and a nominal voltage of 60 V, with an overvoltage category of III. The rated surge voltage is 1.5 kV, providing additional safety in demanding applications. With an ambient operating temperature range of -40 °C to 125 °C, this panel feed-through can function effectively in extreme conditions up to an altitude of 2000 m.

The ZCMD limit switch body is engineered for robust performance in industrial environments, encompassing applications such as packaging, materials handling, and food and beverage processing. It incorporates 2 NC and 2 NO contacts with a snap action mechanism, ensuring positive opening for enhanced safety in machine design.Manufactured from Zamak, this fixed body unit measures 30mm in width, 16mm in depth, and 50mm in height, with a total weight of 0.065kg. The device is equipped with a 10 m fixed cable for reliable electrical connection. It operates effectively with a rated current of 1.5A at 240V AC and 0.1A at 250V DC, boasting a contact insulation form designated as Zb.Designed according to IEC standards, the ZCMD limit switch is compatible with the XC Standard range and can be paired with associated heads such as ZCE67, ZCE08, and ZCE29, among others. It ensures longevity with an electrical durability rating of up to 5 million cycles under various DC conditions. This product also complies with multiple safety standards, including EN 50047 and EN 50041.

The Type 2 surge arrester VAL-SEC-T2-2+0-120DC-FM is engineered for integration into DC power systems, complying with IEC test classification II and EN type T2. It features a two-section DIN rail module with a width of 25.4 mm, allowing for efficient installation and space management.With an operational voltage range of 100 V DC to 120 V DC, this device supports a nominal discharge current of 20 kA and a maximum discharge current of 40 kA, ensuring reliable protection against overvoltage events. The surge protection is indicated optically, and it is also equipped with a remote fault indicator contact for enhanced monitoring capabilities.This arrester's design includes a robust housing made from PA 6.6-FR 20% GF, providing a flammability rating of V-0 and a high CTI value of 600. Its operational temperature range extends from -40 °C to 80 °C, making it suitable for a variety of environmental conditions. The surge arrester is also rated for an altitude of up to 6000 m above sea level.Compliance with EN 61643-11 standards ensures its reliability and effectiveness in surge protection applications.

This empty enclosure is impact resistant, dust resistant, water resistant, corrosion resistant and vibration resistant, making it ideal for operation in harsh environments High performance International standards & certifications (Marine ABS certification, Type 3 and 13)

The SC 3.81/19/180G 3.2SN OR BX is a PCB plug-in connector characterized by its male header design and THT solder connection. With a pitch of 3.81 mm, it accommodates 19 poles and has an outgoing elbow angle of 180°. The solder pin length is 3.2 mm, and the connector is finished in orange with tinned contacts.This connector has been tested according to IEC standards, and its rated data includes a current capacity of up to 10 A at a rated voltage of 300 V for both UL groups B and D. The connector maintains a high insulation strength of ≥ 108 Ω and a Comparative Tracking Index (CTI) of ≥ 550. It is designed for a wide operating temperature range from -50 °C to 120 °C.Dimensionally, the connector measures 73.79 mm in width, 12.4 mm in height, and 7.1 mm in depth, with a net weight of 3.927 g. The construction includes an insulating material of PA GF, compliant with UL 94 flammability rating V-0, making it suitable for various applications. The product belongs to the OMNIMATE Signal series BC/SC 3.81 and is packaged in a box with specific dimensions for efficient handling.

The ZCMD limit switch body is designed for compatibility with various heads, actuators, or connectors from the XCKD, XCKP, and XCKT series. It is equipped with a Zamak body and standard contacts, providing a reliable solution for various applications. The assembly includes 1 NC and 1 NO contacts, featuring a break-before-make operation for enhanced safety.This model is pre-cabled with a 2 meter connection, ensuring ease of installation. It supports an electrical durability of 5,000,000 cycles under specific voltage and current conditions, including DC-13 at 120V and DC-13 at 24V. The device is designed to operate in ambient temperatures ranging from -40°C to 70°C, making it suitable for diverse environmental conditions.With a height of 50 mm, width of 30 mm, and depth of 16 mm, this miniature limit switch body weighs 0.065 kg. It features removable cable connections and silver-plated contacts for improved conductivity. Additionally, it adheres to various safety standards, including IEC 60947-5-1 and UL certifications.

The Fuse 250V 450A Fast-Acting Class K5 OT Series offers essential protection for electrical systems serving lighting, heating, and other non-motor loads. Designed for one-time use, these OT and OTN fuses can safely interrupt short-circuit currents up to 50,000 amperes across all ratings, ensuring reliable operation in various applications. It is important to note that these fuses are not rejection fuses, and it is critical to select replacement fuses with equal or higher interrupting ratings to maintain system integrity. The OTN(15-60) variants comply with Canadian electrical code requirements for Type P low melting-point, non-time-delay fuses. This particular fuse features a rated voltage of 250V for both AC and DC applications, and is classified as Class K5. It has a fast-acting characteristic, making it suitable for protecting against unexpected overloads. The fuse is mounted using a clip and is constructed with a poly tube body, ensuring durability and reliability.

The DFK-MSTBVA 2,5/ 7-G-5,08 is designed as a feed-through header with a nominal cross section of 2.5 mm² and a maximum nominal current rating of 12 A. It is constructed in green with a tin-plated contact surface, ensuring reliable electrical connections.This device accommodates 7 potentials, arranged in a single row, with a total of 7 positions and connections. The pitch measures 5.08 mm and features a linear pin layout, facilitating wave soldering during installation. Each potential is equipped with one solder pin, and the plug-in system complies with the COMBICON MSTB 2,5 standards.In terms of electrical specifications, the rated voltage is 320 V under category III/2, while the contact resistance is maintained at 2.5 mΩ. The product is compliant with WEEE/RoHS standards, ensuring it is free from whiskers as per IEC 60068-2-82/JEDEC JESD 201. The header's construction includes a PBT insulating material, classified under group IIIa, with a Comparative Tracking Index (CTI) of 225.Dimensions are as follows: width of 52.16 mm, height of 15.9 mm, and length of 18.2 mm, with a solder pin length of 3.9 mm. The product is packaged in cardboard, with a minimum order quantity of 50 pieces.

The ATQR series fuses are compact devices designed to handle high inrush currents typical of control transformers, solenoids, and similar inductive loads. With a rated voltage of 600 V AC and 300 V DC, these fuses ensure reliable protection for branch circuits within electrical distribution systems.Each fuse is classified as Class CC and features a time-delay speed characteristic, making it suitable for applications where temporary overloads may occur. The maximum breaking capacity is rated at 200 kA, ensuring robust protection in the event of a fault.The fuses are constructed with a body made of GMG material, while the connection terminals, made of tin-plated copper, utilize a ferrule type for secure mounting. The dimensions of each fuse measure 1.5 inches in length and 0.41 inches in diameter, weighing only 0.02 pounds, which enhances their versatility in various installations. Compliance with ROHS standards further affirms their suitability for modern electrical systems.

This split-core current transformer is intended for low-voltage applications and is compatible with various Schneider Electric energy meters, specifically the PowerLogic BCPM models. It features a rated line current of 1000 A and provides an output voltage of 0.333 V. The transformer measures 62 mm by 201 mm, making it suitable for retrofit installations.The operating temperature range for this device is between -15 °C and 60 °C, while it can be stored in environments ranging from -40 °C to 70 °C. It has a net weight of 0.87 kg and an overall depth of 30 mm. The internal width is 62 mm, and the external width is 151 mm, with height measurements of 139 mm internally and 201 mm externally.It is designed to operate within a relative humidity of 95% and maintains compliance with various sustainability regulations, including RoHS and REACH. The transformer is free of substances that may pose health risks, such as toxic heavy metals, and is mercury-free. Additionally, it includes a cable for electrical connection measuring 1.8 m (AWG 18) rated for 600 V.Measurement accuracy is specified at 1% for a current range of 10% to 100%. This device serves as an essential component in energy monitoring systems, particularly useful in conjunction with the PowerLogic series, enhancing the capabilities of multi-circuit energy meters.

The CR-P/M 42 module serves as an accessory for interface relays in the CR-P and CR-M series, enabling enhanced functionality through its pluggable design. This module incorporates reverse polarity protection and a free-wheeling diode, essential for safeguarding connected circuits. It operates within a rated control supply voltage range of 6 to 24 V DC.With a compact size of 13 mm in width, 24 mm in height, and 9 mm in depth, it is lightweight at only 0.003 kg. Compliance with various standards, such as CAN/CSA C22.2 No.14 and UL 508, ensures its reliability in various applications. The module is RoHS compliant according to EU Directive 2011/65/EU and its amendments.This item is supplied in bags containing 10 pieces, with a gross package weight of 0.032 kg and dimensions of 130 mm x 180 mm x 9 mm. The object classification code for this module is K, and it falls under the ETIM classification for accessories for switching relays.

The insert strip, designated as ESL 29X8 YE, features a yellow color (RAL 1018) and is compatible with various office printing systems, specifically laser printers. The strip can be labeled and has dimensions of 29 mm in width and 8 mm in height, accommodating a lettering field size of 29 x 8 mm.Constructed from polyester, this insert strip is free from silicone and halogen, ensuring compliance with relevant industry standards. It has passed rigorous testing for wipe resistance according to DIN EN 61010-1 (VDE 0411-1), demonstrating its durability under various conditions.Operating within an ambient temperature range of -40 °C to 100 °C, the strip is designed for demanding environments. Each packing unit contains 10 pieces, with a total of 174 individual labels available, organized into rows of 6 labels each. The strip has a foil strength of 135 µm and weighs 12.6 g per piece excluding packing.

The FMC 1,5/ 4-ST-3,81 is a printed-circuit board connector designed for reliable electrical connections. It supports a nominal cross section of 1.5 mm² and is capable of handling a nominal current of 8 A with a rated voltage of 160 V (III/2). Constructed with a tin contact surface, this female connector offers four potentials arranged in a single row with a total of four positions, allowing for efficient connectivity. The connector utilizes a push-in spring connection method for easy installation, with a pitch of 3.81 mm and a conductor/PCB connection direction of 0 °. This product is packaged in cardboard and is compliant with WEEE/RoHS standards. The connector is characterized by its green housing color and is manufactured in Germany. It is suitable for various applications, particularly where compact and secure PCB connections are required.