Accionamientos y motores

This product is part of the Lexium range, an offer of motion servo drives and servo motors. The 8-pole AC servo motor features a low moment of inertia with a maximum mechanical speed of 6000RPM and IP65 smooth shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder giving an angular shaft position precise to less than ±1.3 arc minutes. BSH servo motor satisfies requirements for precision and high dynamic performance, due to the low rotor inertia. It is compact, and offers a high power density.Key Features:Low moment of inertiaMaximum mechanical speed of 6000RPMIP65 smooth shaft without holding brakeSingle-turn SinCos Hiperface® high-resolution absolute encoderCompact design with high power densityApplications:Precision machineryAutomation systemsRoboticsPackaging machines

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 5000RPM, IP65 parallel keyed shaft and holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of speed of rotation (3000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 2.19A and a continuous power of 400W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 165mm (Length) x 60mm (Width), centring collar dimensions are 5.5mm (Depth) x 50mm (Diameter) with 70mm circle diameter of the mounting hole. It weighs 2kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 60mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. TeSys T has a number of components that increase the flexibility of the system. This expansion module adds functionalities to the TeSys T controller. It adds voltage mesurement between phases up to 690 V nominal and 4 additional inputs. Module has 4 discrete logic inputs. 24 VDC is used to power the module. Module has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.

This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. This control unit provides 2 safety discrete inputs, 4 logic discrete inputs and 2 positive or negative logic outputs. It is easy to integrate and maintain. It is furnished with M12 connectors for CANmotion, M12 for CANopen, RJ45 for Modbus. It is a control unit with a discrete input voltage of 24V DC and a discrete output voltage of 30V DC. Signals are controlled by servo motor encoder feedback. It is an IP65 rated product. It weighs 0.636kg. It is suitable for applications involving high-precision, dynamic positioning such as material handling, material working, packaging and printing. This product is certified by CE, TUV, CSA, RoHS and UL. It meets EN/IEC 61800-3 and EN/IEC 61800-5-1 standards. With servo motor and servo drive integrated in one housing, the Lexium 32i is designed for application areas requiring high precision and advanced motor control.

The ABB PSTX250-600-70 is a versatile softstarter designed for medium to large-sized three-phase motors. It offers a rated maximum operational current of 250 A with an operating voltage span from 208...600 V AC. The control voltage ranges between 100...250 V AC at 50/60 Hz.The PSTX features a three-phase control soft start and stop through a voltage or torque ramp, with built-in bypass for easy installation and energy saving. It also includes relay outputs for RUN, TOR, and Event signals in NO (normally open state).The PSTX comes with functions such as current limit, kickstart, analog output, EOL, motor heating, and pump cleaning. It also offers features like jog, braking, stand-still brake, diagnostics, sequence start, and emergency/fire pump mode.Interaction with the PSTX is facilitated through a detachable full graphic display with IP66 and 4x outdoor rating. Communication options include hardwire inputs Start/Stop/Reset of fault, programmable digital inputs, built-in Fieldbus communication Modbus RTU, and optional ANYBUS modules with various protocols like Profinet, Profibus, Modbus TCP, Ethernet IP, and others.The ABB PSTX250-600-70 is the ideal solution for any motor starting application. It's suitable for medium to large-sized three-phase motors with nominal currents from 30...1250 A inline connection or 52...2160 A inside delta connection. Typical applications include pumps, fans, compressors, and conveyors.

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 5000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of speed of rotation (3000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 2.19A and a continuous power of 400W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 129mm (Length) x 60mm (Width), centring collar dimensions are 5.5mm (Depth) x 50mm (Diameter) with 70mm circle diameter of the mounting hole. It weighs 1.45kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 60mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

The TF42-16 thermal overload relay is an economic electromechanical protection device for the main circuit. It offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10. Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP function and a trip indication. The overload relays are connected directly to the block contactors. Single mounting kits are available as accessory.

The ATS01 soft starter is designed for DIN rail installation and facilitates the operation of 3-phase asynchronous motors with a maximum rating of 12A. It is suitable for motors with a power rating of up to 3kW or 3hp for 3-phase configurations within the range of 200V to 240V AC. This product is particularly effective for controlling simple machinery applications such as conveyors, pumps, fans, compressors, and small cranes. Measuring just 45mm in width, this soft starter is one of the compact options available in the market, allowing for versatile installation. It features an integrated bypass mechanism that minimizes operational noise and reduces heat generation. The setup process is straightforward, requiring only two configuration settings, making it accessible for non-specialized personnel. By providing a smooth startup for connected machinery, the ATS01 soft starter helps to mitigate mechanical stresses, thereby extending the lifespan of the equipment. The device complies with various international standards and certifications, including UL and CSA, ensuring reliable performance in a range of operational environments.

The Altistart 22 Soft Starter is a robust solution designed for feeding 3-phase asynchronous motors in supply line or delta connection. With a rating of 170A and voltage range from 230V to 440V, it can handle rated power up to 90kW (400V to 440V in supply line) and up to 132kW (400V to 440V in motor delta connection). This soft starter is ideal for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors, and material handling equipment. Its slim form factor enhances versatility, allowing mounting in frames of any kind of machines.The Altistart 22 Soft Starter features an Integrated bypass, which reduces noise and decreases heat dissipation. Compatibility with SoMove software enables easy configuration and setting transfer, ensuring quick spare installation. This soft starter provides smooth starting for your machinery, minimizing mechanical stresses and extending their service life.

ET 200PRO EDSE/DSSE HF ELECTRONIC DIRECT STARTER ELECTRONIC (SOFT) SWITCHING FULL MOTOR PROTECTION COMPRISING: ELECTRONIC OVERLOAD PROTECTION + THERMISTOR 3 AC 400V/0.9KW; 0.9A...2.00A; W/O BRAKE CONTACT 4DI HAN Q4/2 - HAN Q8/0

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 170A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 150hp (at 575V) / 160kW (at 690V) for standards applications and 125hp (at 575V) / 110kW (at 690V) for severe applications. It weighs 12.4kg and its dimensions are, 200mm wide, 340mm high, 265mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.

Módulo de potencia SINAMICS G120 PM240-2 con filtro clase A incorporado y chopper de frenado integrado 3AC380-480V +10/-20% 47-63HZ, salida de sobrecarga alta 22KW para 200% 3s, 150% 57s, 100% 240s, temperatura ambiente -20 a +50°C (HO), salida de sobrecarga baja 30KW para 150% 3s, 110% 57s, 100% 240s, temperatura ambiente -20 a +40°C (LO), dimensiones 472 x 200 x 237 (AlxAnxPr), FSD, protección IP20, sin unidad de control ni panel, aprobado para versión de firmware CU V4.7 HF8

SINAMICS G120 Módulo de Potencia PM240-2 con filtro clase A incorporado y chopper de freno incorporado 3AC500-690V +10/-20% 47-63Hz Salida Sobrecarga alta: 30kW para 200% 3s, 150% 57s, 100% 240s Temperatura ambiente de -20 a +50°C (HO) Salida Sobrecarga baja: 37kW para 150% 3s, 110% 57s, 100% 240s Temperatura ambiente de -20 a +40°C (LO) Dimensiones (H x A x P): 472 x 200 x 237 mm, Protección FSD IP20 sin unidad de control y panel, aprobado para la versión de firmware CU V4.7 HF8

The Schneider Electric Lexium 32 Servo Motor is an advanced motion control solution, ideal for high-load applications. This medium inertia motor offers a maximum mechanical speed of 8000 RPM and a parallel keyed shaft with holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. The motor is designed to provide robust motion control, even under high loads. It has a rated supply voltage of 480V and a continuous stall current of 3.91A, with a continuous power of 1.68W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is IP54 rated and comes with rotatable right-angled connectors for electrical connection. Its dimensions are 225mm (Length) x 70mm (Width), centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 82mm circle diameter of the mounting hole. It weighs 4kg and supports international standard 70mm flange mount with a natural convection cooling system. The encoder provides automatic identification of the motor when the servo drive starts, allowing for synchronized flows and data transmission from the servo motor to the servo drive. This servo motor features a 3-phase stator and neodymium iron boron (NdFeB) magnets. It comes with a RAL 9005 opaque black paint protective coating and a 4-point axial mounting flange. Cables and connectors are to be ordered separately.

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Schneider Electric Altivar Machine ATV320 series is an offering of variable speed drives designed for Original Equipment Manufacturers (OEMs). This drive is capable of feeding 3-phase synchronous and asynchronous motors, with a rated power up to 0.75kW and a rated voltage from 380V to 500V. The Altivar high IP offers washable drives for harsh environments, ensuring durability in dusty or chemically polluted conditions. The drive is delivered without a fan but includes an embedded EMC C2 filter and provides IP65 protection. It integrates as standard Modbus and CANopen communication protocols with access via the RJ45 connector on the front of the drive. It weighs 6.3kg and comes in two packages, allowing for easy installation either alone or side by side in a multi-drive configuration. The Altivar Machine ATV320 series focuses on easy integration for simple and advanced machine requirements with proven motor control and connectivity. It is specifically designed for material handling, packaging, textiles, hoisting, mechanical actuators, and material working.

This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 14mm smooth shaft, centring collar of 60mm, without holding brake and second shaft end. It provides a high holding torque, that makes it an optimum solution in applications such pick and place, etc. It is a 3-phase stepper motor with a rated current of 2.25A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with terminal box for electrical connection. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It offers service life of about 20000h (bearing). It is an IP41 and IP56 rated product. Its dimensions are 171mm (Length) x 85mm (Width), centring collar dimensions are 2mm (Depth) x 60mm (Diameter) with 98.99mm circle diameter of the mounting hole. It weighs 4.3kg. This stepper motor is particularly suitable for short-distance positioning, such as labelling. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 stepper drives. It supports 85mm flange mount a natural convection cooling system, 4 mounting holes with 6.5mm diameter. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. The 3-phase stepper motor with a very high-power density. It carries out precise step-by-step movements that are controlled by a drive. The 3-phase stepper motor is accurate, powerful and sturdy and excel with a high-power density.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 17A and 230V to 440V, a rated power up to 7.5kW (400V to 440V in supply line) and up to 15kW (440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 15kW/20hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 11kW/15hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.

The SINAMICS G120C is a high-performance AC drive designed for industrial applications. It offers a rated power of 15.0 KW and can handle overloads up to 150% for 3 seconds, making it suitable for demanding tasks in a 3-phase alternating current system.Key Specifications:Operating voltage: 380-480VFrequency range: 47-63 HzUnfiltered I/O interface: 6DI, 2DO, 1AI, 1AOSafe torque off integrated fieldbus: PROFIBUS-DPProtection: IP20 / UL open typeSize: FSC 295x140x203 (H x W x D)The SINAMICS G120C is designed for easy installation and maintenance, with an external 24V power supply. It is a reliable choice for industrial automation applications where high performance and precision are required.