Accionamientos y motores

The Schneider Electric Lexium 32 Servo Motor is an advanced motion control solution, ideal for high-load applications. This medium inertia motor offers a maximum mechanical speed of 8000 RPM and a parallel keyed shaft with holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn) for automatic transmission of data from the servo motor to the servo drive. The motor is designed to provide robust motion control, even under high loads. It has a rated supply voltage of 480V and a continuous stall current of 3.91A, with a continuous power of 1.68W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is IP54 rated and comes with rotatable right-angled connectors for electrical connection. Its dimensions are 225mm (Length) x 70mm (Width), centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 82mm circle diameter of the mounting hole. It weighs 4kg and supports international standard 70mm flange mount with a natural convection cooling system. The encoder provides automatic identification of the motor when the servo drive starts, allowing for synchronized flows and data transmission from the servo motor to the servo drive. This servo motor features a 3-phase stator and neodymium iron boron (NdFeB) magnets. It comes with a RAL 9005 opaque black paint protective coating and a 4-point axial mounting flange. Cables and connectors are to be ordered separately.

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its book form factor allows for a simple and compact installation in your automation cabinets. It works at a rated power up to 0.75kW / 1hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

The Schneider Electric Altivar Machine ATV320 series is an offering of variable speed drives designed for Original Equipment Manufacturers (OEMs). This drive is capable of feeding 3-phase synchronous and asynchronous motors, with a rated power up to 0.75kW and a rated voltage from 380V to 500V. The Altivar high IP offers washable drives for harsh environments, ensuring durability in dusty or chemically polluted conditions. The drive is delivered without a fan but includes an embedded EMC C2 filter and provides IP65 protection. It integrates as standard Modbus and CANopen communication protocols with access via the RJ45 connector on the front of the drive. It weighs 6.3kg and comes in two packages, allowing for easy installation either alone or side by side in a multi-drive configuration. The Altivar Machine ATV320 series focuses on easy integration for simple and advanced machine requirements with proven motor control and connectivity. It is specifically designed for material handling, packaging, textiles, hoisting, mechanical actuators, and material working.

This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 14mm smooth shaft, centring collar of 60mm, without holding brake and second shaft end. It provides a high holding torque, that makes it an optimum solution in applications such pick and place, etc. It is a 3-phase stepper motor with a rated current of 2.25A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with terminal box for electrical connection. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It offers service life of about 20000h (bearing). It is an IP41 and IP56 rated product. Its dimensions are 171mm (Length) x 85mm (Width), centring collar dimensions are 2mm (Depth) x 60mm (Diameter) with 98.99mm circle diameter of the mounting hole. It weighs 4.3kg. This stepper motor is particularly suitable for short-distance positioning, such as labelling. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 stepper drives. It supports 85mm flange mount a natural convection cooling system, 4 mounting holes with 6.5mm diameter. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. The 3-phase stepper motor with a very high-power density. It carries out precise step-by-step movements that are controlled by a drive. The 3-phase stepper motor is accurate, powerful and sturdy and excel with a high-power density.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line connection. It has a rating of 17A and 230V to 440V, a rated power up to 7.5kW (400V to 440V in supply line) and up to 15kW (440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 15kW/20hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 11kW/15hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.

The SINAMICS G120C is a high-performance AC drive designed for industrial applications. It offers a rated power of 15.0 KW and can handle overloads up to 150% for 3 seconds, making it suitable for demanding tasks in a 3-phase alternating current system.Key Specifications:Operating voltage: 380-480VFrequency range: 47-63 HzUnfiltered I/O interface: 6DI, 2DO, 1AI, 1AOSafe torque off integrated fieldbus: PROFIBUS-DPProtection: IP20 / UL open typeSize: FSC 295x140x203 (H x W x D)The SINAMICS G120C is designed for easy installation and maintenance, with an external 24V power supply. It is a reliable choice for industrial automation applications where high performance and precision are required.

The Schneider Electric Altivar Process ATV900 is a versatile variable speed drive (VSD) capable of handling both synchronous and asynchronous power motors. It offers high motor performance for applications requiring slight overload, up to 120%, and significant overload, up to 150%. This VSD operates at a rated supply voltage ranging from 380V to 480V AC.The ATV900 is specifically designed for industrial processes in various sectors such as oil and gas, mining, minerals and metals, food and beverage, water and wastewater. It provides total control of any kind of coupling in master/slave applications, ensuring seamless operation even during connection breakdowns.The ATV900 offers advanced connectivity options including EtherNet/IP and Modbus TCP, allowing deep integration into automation architectures. Its web server and data logging capabilities facilitate fast troubleshooting and preventive maintenance, reducing downtime.This VSD is designed to be mounted in a vertical position (+/- 10°) on a wall, offering flexibility in installation.

Motor de arranque SIRIUS M200D AS-i, Comunicación: AS-Interface Inversor estándar Conmutación electrónica AC-3, 0,75KW / 400 V 0,15 A...2,00 A, Protección electrónica contra sobrecarga Termistor: THERMOCLICK / PTC con contacto de freno, 400 V AC 4 DI / 1 DO, AS-i Han Q4/2 - Han Q8/0 con operación manual en sitio y interruptor de llave

MÓDULO DE POTENCIA SINAMICS G120 PM240-2 sin filtro con chopper de freno incorporado 3AC380-480v +10/-20% 47-63HZ salida de alta sobrecarga 18,5KW para 200% 3s, 150% 57s, 100% 240s temperatura ambiente -20 a +50 grados C (ho) salida de baja sobrecarga 22KW para 150% 3s, 110% 57s, 100% 240s temperatura ambiente -20 a +40 grados C (lo) 472 x 200 x 237 (hxaxt), protección fsd IP20 sin unidad de control y panel, aprobado para versión de firmware CU v4.7 hf8

This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames. It works at a rated power up to 3kW / 4hp and a rated voltage from 380V to 500V AC. Its robust design with IEC 60721-3-3 class 3C3 coated printed circuit boards allows to extend machine availability in harsh environmental conditions, for example at ambient temperatures of up to 60°C without the need of additional cooling. It incorporates functions suitable for the most common applications, including torque and speed accuracy at very low speed, high dynamic performance with flux vector control without sensor and extended frequency range for high-speed motors. It also incorporates parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions are configured using SoMove software. Altivar Machine ATV320 was designed for Original Equipment Manufacturers (OEMs) that meets simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options (braking resistors, line chokes, motor chokes, additional EMC filters) are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It is possible to configure, control, and diagnose ATV320 drives directly in SoMachine and SoMove software by means of the same software brick (DTM).

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 320A and 230V to 440V, a rated power up to 160kW (400V to 440V in supply line) and up to 250kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

The Altivar Machine ATV320 variable speed drive is an ideal solution for feeding single-phase synchronous and asynchronous motors. Its compact design allows for vertical stacking inside machine frames, making it a space-saving option. This robust drive operates at a rated power of up to 1.1kW / 1.5hp and can handle voltages ranging from 200V to 240V AC.The ATV320 is designed with IEC 60721-3-3 class 3C3 coated printed circuit boards, enabling it to operate in harsh environmental conditions. For instance, it can function at ambient temperatures up to 60°C without the need for additional cooling. This drive incorporates functions suitable for a variety of applications, including torque and speed accuracy at very low speeds, high dynamic performance with flux vector control without sensors, and an extended frequency range for high-speed motors.The ATV320 also supports parallel connection of motors and special drives using the voltage/frequency ratio and static speed accuracy and energy saving for open-loop synchronous motors. The drive software includes 5 safety functions that help machines meet safety requirements, whether or not they are used in conjunction with a Preventa safety module. These safety functions can be configured using SoMove software.The Altivar Machine ATV320 is designed for Original Equipment Manufacturers (OEMs) that require simple and advanced application requirements covered for packaging, material handling, textile, material working, mechanical actuators and hoisting. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, NOM, EAC and RCM certified. Mounting accessories and external options such as braking resistors, line chokes, motor chokes, additional EMC filters are available with Altivar Machine ATV320 drives. The type of external accessories and options depends on the drive rating.The ATV320 is designed to be mounted in a vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. It is fully integrated inside Schneider Electric’s EcoStruxure Machine through DTM. It can be configured, controlled, and diagnosed directly in SoMachine and SoMove software by means of the same software brick (DTM).

TeSys U control and diagnostic unit to be inserted in advanced power bases LUB120, LUB320, LUB380 to form a TeSys U starter controller, for 1-phase motor applications up to 2.2kW@400V. It provides full protection to motors with a rated current Ir 3-12A (Ir adjustable), overload tripping class 10, short circuit at 13 x Irmax, overcurrent at 14.2 x Ir, phase loss, insulation fault (protection of equipment only). It provides a thermal overload alarm to be used locally using a LUFDA module or remotely using a LULC module, and a test push button for overload simulation. To be used with a 110-240V AC / 110-220V DC voltage for the control of the starter (through the control terminals A1/A2 located in the power base). Certified when used in conjunction with a LUB power base (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The SINAMICS V90 Servo Drive with PROFINET interface is designed to deliver precise and efficient motion control for a wide range of industrial applications. This drive is ideal for applications requiring high performance and reliability. With an input voltage range of 380-480 V and a motor power of 0.75/1.0 kW, it ensures optimal performance and energy efficiency.The SINAMICS V90 features a robust design with IP20 protection, making it suitable for use in various industrial environments. Its compact size (80x180x200 mm) allows for easy integration into existing systems. The drive supports a frequency range of 0-330 Hz, providing flexibility for different motor speeds and applications.Compliance with industry standards such as RoHS and WEEE ensures that the SINAMICS V90 meets environmental and safety requirements. Additionally, the drive is designed for easy installation and maintenance, reducing downtime and operational costs.Applications: The SINAMICS V90 is suitable for a variety of applications, including packaging machines, material handling systems, and general automation tasks where precise motion control is essential.

The Schneider Electric Altistart 01 is a DIN rail mounted soft starter designed for 3-phase asynchronous motors. This compact device can handle a motor rated power of up to 5.5kW or 7.5hp, operating at voltages ranging from 200V to 240V AC. It is ideal for applications such as conveyors, pumps, fans, compressors, automatic doors and gates, small cranes, and belt-driven machinery.With a width of only 45mm, this soft starter is one of the smallest on the market, making it suitable for installation in tight spaces. It features an integrated bypass that reduces noise and minimizes heat dissipation. The setup process is straightforward, requiring just two settings, which can be configured even by non-specialists.The Altistart 01 soft starter ensures smooth starting of your machinery, preventing mechanical stresses and extending the service life of your equipment. Its compact size and easy installation make it a versatile solution for various industrial applications.

ET 200PRO ERSE/RSSE HF ARRANCADOR ELECTRÓNICO INVERSOR INTERRUPCIÓN ELECTRÓNICA (SUAVE) PROTECCIÓN COMPLETA DEL MOTOR COMPUESTO POR: PROTECCIÓN DE SOBRECARGA ELECTRÓNICA + TERMISTOR 3 AC 400V/5.5KW; 1.5A...(9A)12A SIN CONTACTO DE FRENO 4DI HAN Q4/2 - HAN Q8/0

This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It features 3 built-in RJ45 communication ports as standard, 1 Ethernet port, 2 serial ports. It works at a rated supply voltage from 380V to 480V AC. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 18.5kW / 25hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 15kW / 20hp for applications requiring significant overload (up to 150%). It weighs 14.2kg and its dimensions are, 211mm wide, 546mm high, 232mm deep. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. Accessories (fan kit, graphic display terminal) and options (I/O expansion modules, communication modules, EMC input filters) are available with Altivar Process ATV600 drives, depending on the drive rating. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 7.5kW/10hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 5.5kW/7.5hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.

The TeSys H ultra compact direct safety starter is designed for the control and protection of 3-phase motors, offering a power rating of up to 3kW at 400V (3HP at 480V). This hybrid technology starter provides an extended electrical durability of up to 30 million cycles AC-53, making it suitable for applications requiring high reliability and longevity.The starter features a compact design with a width of only 22.5mm, allowing for efficient space utilization in control panels. It also offers an adjustable motor current range of 1.5-6.5A, providing flexibility to meet the specific requirements of different applications.Safety is ensured through class 10A thermal overload protection with auto/manual/remote reset, phase loss and phase unbalanced protection, stall and jam motor protection. The integrated Safe Torque Off (STO) function complies with SIL3 level according IEC61508-1 and PLe level according ISO13849-1, making it suitable for safety chain applications.The starter is equipped with logic inputs for ON/OFF motor running and remote reset after thermal tripping, as well as a 1C/O contact relay for fault indication. The front face features an LED status indicator to show the tripping and motor running status.The TeSys H ultra compact direct safety starter is designed for DIN rail mounting with screw terminals for control and power connections. It can operate in ambient temperatures ranging from -25°C to 70°C, without derating until 30°C. The starter is multi-standard certified (IEC, UL, CCC) and complies with Green Premium standards (RoHS/REACh).