Contactores y relés

The SENTRY BSR10 24VDC is a robust safety relay designed to monitor the status of safety devices. It features relay outputs, including 3 normally open (3NO) and 1 normally closed (1NC), with a +24 VDC supply voltage. The relay comes equipped with screw terminals for easy installation.This safety relay is ideal for direct integration into the voltage supply circuit of the relay, making it suitable for monitoring emergency stops or other safety-critical applications. Additionally, it can be used as an expansion relay in conjunction with a safety relay or safety PLC to increase the number of safe outputs.

The TeSys Deca contactor is a versatile solution for motor starters across diverse applications. With 13 contactor ratings, it can handle inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor is designed for easy mounting on DIN rail or directly onto a panel.Featuring two normally open (NO) and two normally closed (NC) power contacts, the contactor has a 25A resistive load rating. It comes with a low consumption 48VDC coil equipped with a transient suppressor module. The contactor also includes one NO and one NC auxiliary contact as standard.The contactor measures 3.35 inches in height, 1.77 inches in width, and 3.90 inches in depth, weighing 1.16 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it a reliable choice for various applications. Additionally, it meets RoHS/REACh requirements, positioning it as a Green Premium product.

This SSP three-phase solid state relay is part of the range of solid state modular relays Harmony. It features 50A power rating and 3NO contacts. It features a control circuit voltage of 18V to 36V AC and an output voltage (load output) of 48V to 530V AC. This relay is maintenance free, fully electronic with unlimited life span. It features a control input voltage LED indicator in green. Its protection index is IP20. It weighs 240g and its dimensions are, 101.3mm wide, 79.7mm high, 35.4mm deep. 0 It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. 0 0 0 It can be mounted on panel fixed by screws. 0 0 0

The AF205-30-11-11 is a 3 pole - 1000 V IEC or 600 V UL contactor with pre-mounted auxiliary contacts and Main Circuit Bars, controlling motors up to 110 kW / 400 V AC (AC-3) or 150 hp / 480 V UL and switching power circuits up to 350 A (AC-1) or 300 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

The CT-AWE is a single-function electronic time relay from the CT-E timer range. It provides an impulse-OFF (trailing edge interval) function with a time range from 0.3 s to 30 s. This time relay operates with a rated control supply voltage of 220 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A. A control input works with voltage-related (non-floating) triggering.

Temperature monitoring relay CM-TCS.13S: temperature range 0..+200°C, width 25 mm, adjustable by potentiometer, 1 temperature sensor, 2 thresholds, overtemperature, undertemperature, window monitoring, rated control supply voltage 24-240 V AC / DC, 2 c/o, screw connection terminals

The TeSys Deca contactor is an integral part of Schneider Electric's control systems, designed to cater to a broad spectrum of applications. This particular model, with its 12A inductive rating, is versatile enough for both DIN rail and panel mounting.This 3 pole IEC contactor is available in various ratings, including up to 150 full-load amps for inductive motor applications and up to 200 amps for resistive loads. Its compact design and robust construction make it suitable for a wide range of industrial environments.The contactor boasts a unique feature: it can be rated for different horsepower levels depending on the voltage, ranging from 3HP at 200-208VAC to 10HP at 600VAC three phase. For single phase applications, it can handle 0.5HP at 115VAC and 2HP at 240VAC.The contactor comes equipped with a 120VAC 50/60Hz coil, along with one normally open and one normally closed auxiliary contact. The NC contact is mirror certified for enhanced reliability.Spring terminals are used for load and auxiliary connections, ensuring easy installation and maintenance. A comprehensive line of accessories further enhances its adaptability to meet diverse application requirements.With dimensions of 3.90 inches in height, 1.77 inches in width, and 3.39 inches in depth, and weighing just 0.72 lbs, this contactor is a compact yet robust solution for your industrial needs.It adheres to stringent quality standards, including UL, CSA, IEC, CCC, EAC, and Marine certifications. Its compliance with RoHS/REACh regulations makes it an eco-friendly choice, earning it the Green Premium label.

TeSys D contactors are designed for seamless integration into control systems. They offer a wide range of applications, from small to large inductive and resistive loads. This specific model is rated for 115A inductive load and can be mounted on DIN rail or directly on a panel.The contactor features a 480VAC 60Hz coil and includes one normally open and one normally closed auxiliary contact as standard. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, making it suitable for various applications.The contactor measures 6.22 inches in height, 4.72 inches in width, and 5.35 inches in depth, weighing approximately 5.51 lbs. It is RoHS/REACh compliant, making it an environmentally friendly choice.

This temperature monitoring relay is designed to handle a wide range of temperatures from -58°F to 932°F. It supports multiple sensor types including PT100/1000, KTY83/84, and NTC sensors. The relay features adjustable thresholds for over, under, or window monitoring. It operates on a control voltage of 24-240V AC/DC and comes with screw terminals for easy installation. Please note that this product is no longer in production, and the recommended successor is the 3RS2600-1BW30.

The CM-MPS.21S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 180-280 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay is also suitable to monitor single-phase mains. It monitors all phase parameters such as over/undervoltage, phase unbalance, phase failure as well as an interrupted neutral. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The SE Relays 750R series, plug-in general purpose relay offeres robust and historically proven octal style mounting relay platform that provides excellent structural support with hermetically sealed for wash down conditions cover compliant with UL Class I Division 2 for Hazardous Locations Groups A, B, C, and D. Contacts rated as 12A resistive at 120VAC/240VAC, 1/3hp at 120VAC, 1hp at 277VAC with nominal coil voltage 120VAC , make relay to be an ideal choice for automation panels and controls. Silver alloy contact 3PDT configuration reduces oxidation and increases shelf life, gives simultaneous control of separate circuits. Socket-mounting option simplified installation and maintenance and using of protection modules, hold-down clips, and other accessories. Mechanical standard flag indicator displays the relay status during testing or operation.

The CM-MPN.52S is a multifunctional relay from the CM three-phase monitors range. It operates with a rated control supply voltage / three-phase measuring voltage of 350-580 V AC 50/60 Hz and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. This relay monitors all phase parameters such as over/undervoltage, phase unbalance and phase failure. The corresponding threshold values are adjustable. The CM-MPN.52S also offers selection of phase sequence monitoring, automatic phase sequence correction as well as an ON or OFF tripping delay. The output contacts can be configured as 1x2 c/o (SPDT) contacts (common signal) or 2x1 c/o (SPDT) contact (separate signal for over- and undervoltage thresholds) operation. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200 to 208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.73 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys D contactors are engineered for optimal integration into control systems, providing a robust solution for various applications. These contactors are available in multiple ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This specific 65A inductive 3 pole IEC contactor is designed for mounting on DIN rail or directly on a panel. It offers both Horsepower and Kw motor rating for international acceptance. The contactor can handle 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC, and 50HP at 600VAC three phase. It also supports 5HP at 115VAC and 10HP at 240VAC single phase.The contactor comes with a 100 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections, making it easy to meet the requirements of most applications.The contactor measures 4.80 inches in height, 2.17 inches in width, and 4.72 inches in depth, weighing 1.90 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh, making it a Green Premium product.

The TMP MON REL is a temperature monitoring relay designed for overshoot protection. It features a PT100 sensor that measures temperatures ranging from -50°C to 50°C. This relay operates on a control voltage of 24V AC/DC, providing a 1 NO (Normally Open) and 1 NC (Normally Closed) output. The quiescent current principle ensures efficient operation while the spring-loaded terminal ensures reliable connection.It's important to note that this product is phased out. The preferred successor is the 3RS2500-2AA30, which offers enhanced features and improved performance.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The CM-PAS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.41S monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The Pilz 751102 is a versatile industrial automation component that offers reliable and efficient performance in a range of applications. With its compact design and advanced functionality, this component is ideal for use in complex automation systems where precision and speed are critical. Featuring high-quality materials and advanced control algorithms, the Pilz 751102 is designed to withstand harsh industrial environments and deliver consistent performance over time. Whether you need to control complex machinery or automate a production line, this component is the perfect choice for your industrial automation needs. So if you're looking for a powerful and reliable industrial automation product, look no further than the Pilz 751102.

The Pilz 751330 is a robust and reliable industrial automation component designed to provide seamless and efficient operation in various industrial applications. This high-quality product features advanced technology and a durable construction that ensures it can withstand even the most challenging operating conditions.With its intuitive interface and easy-to-use controls, the Pilz 751330 offers unparalleled flexibility and customization options, allowing users to tailor its performance to meet their specific needs. Whether you're looking to optimize your production line, increase efficiency, or reduce downtime, this powerful automation component is the perfect solution.So if you're looking for a top-of-the-line industrial automation product that delivers exceptional performance and reliability, look no further than the Pilz 751330. With its cutting-edge features and rugged construction, this versatile component is sure to exceed your expectations and help you achieve your automation goals.

The Pilz 750156 industrial automation component is a high-performing safety relay that ensures the safe functioning of machines and processes in industrial settings. Designed with advanced technology, this product provides reliable and efficient safety control for applications that require Category 4 safety level. Equipped with multiple safety functions such as emergency stop, light curtain, and two-hand control, the 750156 safety relay ensures immediate and reliable shutdown of machinery in case of an emergency. It is easy to install and operate, and can be integrated with other safety systems for enhanced safety and efficiency. With its robust construction and long service life, the Pilz 750156 safety relay is a trusted solution for industrial automation safety needs.