Contactores y relés

The TeSys D contactor is engineered for motor control applications, featuring three poles (3NO) and capable of handling currents up to 9A at a voltage of 690V AC-3/3e, which corresponds to a power rating of 4kW at 400V. This device operates with a 400V 50/60Hz AC coil and includes one normally open (NO) and one normally closed (NC) auxiliary contact, the latter being NC mirror certified. Connection is facilitated via screw clamp terminals.Designed for demanding environments, the contactor can sustain operating rates of up to 3600 cycles per hour and is rated for ambient temperatures up to 60°C, ensuring high reliability and durability. Its compact design, measuring only 45mm in width, allows for versatile mounting options, including DIN-rail or screw fixing. The contactor also meets multiple international standards, including IEC, UL, CSA, CCC, EAC, and Marine certifications, making it suitable for a variety of applications.

This XPSVNE safety module is for zero-speed detection. It meets the requirements of PL c/Category 2 conforming to EN/ISO 13849-1.and SILCL1 conforming to EN/IEC 61508 and EN/IEC 62061. Used in conjunction with XU2S single-beam photo-electric sensors (periodically tested), it establishes a category 2 light curtain conforming to IEC/EN 61496 parts 1 and 2. It has removable terminals for easier and better control wires tightening, thus improving installation reliability. It has additional solid-state output for communication with PLCs about safety status of your process.

TeSys LRD overload relays are designed to be used with TeSys D contactors to make a motor starter. This overload relay can be used with 9 amp through 38 amp TeSys D contactors. These differential thermal overload relays detect over currents in the lines to the motor. When an overcurrent is detected the overload relay working with the contactor will disconnect the power to the motor. This will minimize the damage to the motor windings. This overload relay has an adjustable trip current rating of 16 to 24 amperes. This trip current rating is calibrated per Class 10A. This overload relay uses EVERLINK termnals in place of the standard terminals.

The thermal overload relay is designed to operate with contactors, facilitating motor protection by detecting overcurrents. When an overcurrent is identified, the relay disconnects power to the motor, thus reducing potential damage to the motor windings. This particular model features an adjustable trip current rating from 9 to 13 amperes and is calibrated to Class 10A. It is compatible with TeSys D contactors in the range of 9 amp to 38 amp. The device is certified under multiple standards, including IEC, UL, CSA, CCC, EAC, and ATEX, making it suitable for various applications, including marine environments. Its operational temperature range extends from -20°C to 60°C, and it can withstand mechanical stresses such as vibrations up to 6 Gn and shocks up to 15 Gn. This product also conforms to environmental standards, being RoHS compliant and obtaining the Green Premium designation. The relay features a rated operational voltage of 690 V AC and is equipped with terminals that accommodate various cable types for flexibility in installation.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.98 inches deep. It weighs 1.18 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D control relay, 5 contacts (3NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 400V 50/60Hz AC control circuit, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -40/+60°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium product (RoHS/REACh).

LC2D09F7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 110V 50/60Hz AC coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D09F7 is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 4kW@400V. It includes a 110V 50/60Hz AC coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with a 110V AC coil that can be supplied at 50Hz or 60Hz. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 2 million cycles at 9A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Connection by screw clamp terminals.

This safety relay is designed for monitoring Emergency stop, Guard switch, Magnetic switch, Proximity safety switch, PNP sensor, RFID safety switch or Safety light curtain. The safety relay is powered with 24V AC/DC, and equipped with a screw removable terminal block. This universal safety module embeds pre-defined safety functions, or selectable safety functions via rotary selectors. This safety relay embeds 2 safety inputs, 3 ON/OFF configurable pulsed outputs, 3 NO safety outputs, and 1 solid state diagnostic output with complete status information. The maximum safety level achieved by this safety relay is PLe/Category 4 conforming to ISO 13849-1, SILC L 3 conforming to IEC 62061, and SIL 3 conforming to IEC 61508. This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. This safe relay conforms to IEC60947-5-1, IEC61508-1/2/3, ISO13849-1, IEC62061 functional safety standards, is certified by cULus, TÜV, EAC, CCC and KC marking. Harmony safety relays are compatible with Modicon logic controllers. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal safety relays are the first choice for managing single safety functions easily, typically in machines of simple to medium complexity. Harmony XPS Universal is the first choice for a broad range of simple to mid-complex machines.

TeSys LRD differential thermal overload relays are integral components within motor starter assemblies, specifically engineered for use with TeSys D contactors. These relays provide critical overcurrent detection and disconnection capabilities to safeguard motors from damage. Designed to operate in conjunction with TeSys D contactors ranging from 80A to 95A, the LRD3363 monitors current flow to the motor, interrupting power supply upon detection of excessive currents that could potentially harm motor windings. The device features an adjustable trip current rating between 63 and 80 amperes, calibrated according to Class 10A specifications. The TeSys LRD series demonstrates broad compliance with international standards including IEC, UL, CSA, CCC, EAC, ATEX, and Marine certifications. Furthermore, it adheres to Green Premium guidelines encompassing RoHs/Reach directives.

The TERMSERIES Relay Module, model TRS 24VDC 1CO, is a versatile component designed for industrial automation systems. This module features a single control contact (1 CO) made of AgNi material, ensuring reliable performance under demanding conditions. With a rated control voltage of 24 V DC ±20%, it offers robustness and flexibility in various applications. The continuous current capacity is 6 A, making it suitable for high-load scenarios. The module also incorporates screw connections for easy installation and maintenance. This TRS 24VDC 1CO Relay Module is an ideal choice for those seeking a reliable and efficient solution for their industrial automation needs.

This Harmony RE17R timing relay can be set between 0.1 seconds and 100 hours, has an output rating of 8A, is 17.5mm wide and can be supplied with 24V DC, 24V to 240V AC. It also has 1 changeover contact SPDT (single pole double throw). It has one of market slimmest form-factors, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a sealable cover, simple and precise settings with rotary trimmers. Single function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0 0 0

The Schneider Electric Harmony Electromechanical Relay Protection Accessories are designed to enhance the safety and reliability of your relay systems. Featuring a diode with a rated voltage of 6V to 250V DC, these protection modules are compatible with RPZ and RXZ sockets. They provide essential protection against electrical shocks, safeguarding both personnel and equipment.The modular design of these accessories simplifies post-installation servicing, modifications, and adaptations, making them accessible even to non-specialists. With a focus on ease of use, these modules include a mechanical indicator and LED for easy status readiness, along with a one-step lockable test button for convenient operation.Engineered to meet stringent industrial standards, these protection accessories ensure product reliability and compliance. They are part of Schneider Electric's commitment to eco-design, featuring better packaging made with recycled cardboard.Applications: These protection accessories are ideal for use in general control panel applications, providing a reliable solution for enhancing the safety and functionality of your relay systems.

The RXM series includes miniature plug-in relays designed for use with RXZE sockets. This specific model is configured with four changeover (C/O) contacts, supporting a maximum switching capacity of 1500 VA and a continuous output current of 5A. It operates effectively within a control circuit voltage range of 110 V DC, making it suitable for various industrial applications including HVAC, automation control panels, and motor control systems.The relay incorporates a lockable test button, which allows for momentary activation of the relay by pressing the blue button, followed by locking it in place with the green component. A mechanical indicator adjacent to the test button displays the contact status using an orange flag, while a green LED illuminates when the relay is activated, providing clear visual feedback.This product is designed to withstand harsh operating conditions, featuring a wide ambient air temperature range of -40°C to 55°C and compliance with various international standards including IEC, CE, UL, and RoHS. Furthermore, it offers robust dielectric strength ratings of 1300 V AC between contacts and 2000 V AC between coil and contact.For added durability, the relay is engineered to resist vibrations and shocks, withstanding up to 3 gn during operation and 10 gn when not in operation. The relay is also equipped with a pollution degree rating of 2, ensuring reliable performance in challenging environments.

This Harmony RSB interfacing plug-in relay has a control coil voltage of 24V DC and has 2 changeover contacts double pole double throw with a rating of 8A. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type allows easy installation and maintenance. The product is IP40 and has a transparent cover allowing operator to visually inspect the status of contacts. 0 0 0 0 0 0 0 0 0 0 0 0

The CM-ESS.2S is a single-functional voltage monitoring relay from the CM single-phase monitors range. This monitoring relay operates with a rated control supply voltage of 220 - 240 V AC and has a 2 c/o (SPDT) output with contacts rated at 250 V / 4 A. It provides a RMS measuring principle for DC and AC voltages with 4 measuring ranges: 3-30 V, 6-60 V, 30-300 V and 60-600 V and works according to the open-circuit principle. The CM-ESS.2S is configurable for over- or undervoltage monitoring. The hysteresis is adjustable within a range of 3 to 30 % of the threshold value and the tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

The EF96 is a self-supplied electronic overload relay that provides efficient and accurate motor protection. Its wide setting range, high operational temperature range, and selectable trip class (10E, 20E, 30E) make it compatible with standard motor applications.This device features temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function, and a trip indication. It can be directly connected to the contactors, and single mounting kits are available as an accessory.The EF96 is ATEX and IECEx certified, ensuring compliance with safety standards in hazardous environments. Its easy-to-use design and compatibility with standard motor applications make it a reliable choice for various industrial applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 12A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 2HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.72 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

VM4 is a mechanical interlock unit designed for the interlocking side-by-side without additional width of two 3-pole or 4-pole AF09...AF38, AFC09...AFC38, AFS09...AFS38 contactors. When mounted between two contactors, the VM4 mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. The mechanical interlock unit VM4 includes 2 fixing clips (BB4).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Input solid-state relay, with DC voltage output push-pull, transmission frequency: 100 kHz, with light indicator and protective circuit in input and output circuits, input: 24 V DC, output: 4 - 18 V DC/50 mA