Contactores y relés

Safety relay for emergency stop, safety doors, and light grids up to SIL 3, Cat. 4, PL e, 1 or 2-channel operation, automatic start, 2 enabling current paths (1-channel), US = 24 V DC, fixed screw terminal block

The Omron Solid State Relay with LED Indicator is designed for applications requiring high reliability and safety. Featuring forcibly guided contacts in compliance with EN50205 Class A standards, this relay ensures that contacts are mechanically linked to prevent simultaneous closure of normally open and normally closed contacts, enhancing safety in critical applications. The relay supports the CE marking of machinery under the Machinery Directive, making it suitable for use in interlocking circuits to avoid hazardous machine status.With a robust design, the relay offers a contact form of 4PST-NO/DPST-NC, capable of handling resistive loads up to 250 VAC 10 A and 30 VDC 10 A for normally open contacts, and 250 VAC 6 A and 30 VDC 6 A for normally closed contacts. The relay operates with a 24 VDC coil rating and consumes approximately 0.8 W of power. The PCB terminal structure allows for easy integration into various systems.Additional features include a high insulation resistance of 100 MΩ min. at 500 VDC, dielectric strength of up to 4000 VAC for 1 minute between coil and contacts, and excellent vibration and shock resistance. The relay is designed for endurance, with a mechanical lifespan of over 1,000,000 operations and an electrical lifespan of over 100,000 operations at rated load.This relay is ideal for use in industrial automation, safety circuits, and machinery requiring reliable switching and safety compliance. It can be mounted using sockets or soldering, with applicable sockets including P7S-14F-END and P7S-14P-E.

LC2K0901E7 is a compact 3-pole TeSys K reversing contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 48V 50/60Hz AC coil, 2NC auxiliary contacts, a mechanical interlock and pre-wired reversing circuit. LC2K0901E7 is a 3-pole TeSys K reversing contactor from Schneider Electric for simple motor applications rated up to 4kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it is assembled with a mechanical interlock and a pre-wired reversing circuit. It includes a 48V 50/60Hz AC coil and 2NC built-in auxiliary contacts. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Provides a 48V AC coil compatible 50/60Hz and 2NC built-in auxiliary contact. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

Schneider Electric's TeSys LRD overload relays are designed for seamless integration with TeSys D contactors, forming a comprehensive motor starter solution. These differential thermal overload relays are equipped to detect overcurrents in the lines feeding the motor. Upon detection of an overcurrent, these relays, working in conjunction with the contactor, will disconnect power to the motor, thereby minimizing damage to the motor windings. This overload relay boasts an adjustable trip current rating ranging from 37 to 50 amperes. This rating is calibrated according to Class 10A standards. Furthermore, it is multi-standard certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), and complies with Green Premium standards (RoHS/Reach).

TeSys K Contactors: The Schneider Electric TeSys K contactor is a versatile and reliable solution for non-inductive load control applications. With a capacity of up to 20A/690V AC-1, this compact (45mm width) device offers a 24V 50/60Hz AC coil without built-in auxiliary contact, ensuring optimal performance and flexibility. Featuring connection by screw clamp terminals, the TeSys K contactor is designed for operating rates of up to 600 cycles per hour and can withstand environments up to 50°C. Its multi-standard certification (IEC, UL, CSA, CCC, EAC) and Green Premium compliance (RoHS/REACh) make it a reliable choice for standard applications. Key Features: 2 poles (NO + NC) Up to 20A/690V AC-1 capacity 24V 50/60Hz AC coil without built-in auxiliary contact Compact design (45mm width) DIN-rail mounting or screw fixing Multi-standard certified (IEC, UL, CSA, CCC, EAC) Green Premium compliant (RoHS/REACh)

The TeSys Deca IEC Contact Relay is an advanced solution designed for seamless integration into control systems. This contactor can be utilized to create motor starters for a diverse array of applications, making it a versatile choice. The TeSys Deca IEC Contact Relay is available in 13 different contactor ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific model, rated at 95A for inductive loads, can be mounted on DIN rail or directly onto a panel. This contactor boasts both Horsepower and Kw motor rating for international acceptance. It is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC, and 60HP at 600VAC three-phase applications. Additionally, it can handle 7.5HP at 115VAC and 15HP at 240VAC single-phase loads. The contactor is equipped with a 220 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified, and screw clamp terminals are used for load and auxiliary connections. The TeSys Deca IEC Contact Relay measures 5.00 inches in height, 3.35 inches in width, and 5.12 inches in depth, weighing approximately 3.55 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh, making it a Green Premium product.

The EF370-380 is an self-supplied electronic overload relay, which means no extra external supply is needed. It offers reliable and fast protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (NC), signal contact (NO), automatic- or manual reset selectable, trip-free mechanism, STOP- and Test function and a trip indication. The overload relays are connected directly to the contactors. EF370 has ATEX and IECEx certification 1)

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 25A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200-208VAC, 7.5HP at 240VAC, 15HP at 480VAC and 20HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 3HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 60A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 380 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.82 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys LR9F electronic overload relay, thermal setting range 132-220A, class 10, for protection of motors 90-110kW@400V. to be mounted directly below a TeSys F 3-pole contactor LC1 F185, F225, F265, use of a support mounting plate LA7F901 is recommended (to be ordered separately). Motor protection includes thermal overload of 1-phase and 3-phase motors, phase failure, phase unbalance, prolonged starting times, stalled rotor conditions. On the front of the relay, it provides a thermal adjustement dial, buttons for test, stop & reset, a trip indicator, trip auxiliary contacts 1NO+1NC. Multi standards certified (IEC, UL, CSA, CCC, Marine), Green Premium compliant (RoHs/Reach).

The Digital Monitoring Relay for 3-Phase Power Supply is an advanced device that monitors the voltage phase sequence of a 3-phase power supply. It can activate in response to phase failure, providing a reliable solution for maintaining consistent power delivery.This relay operates within a voltage range of 160 to 690 V at frequencies between 50 and 60 Hz. It offers protection against both undervoltage and overvoltage conditions, with hysteresis settings ranging from 1-20 V and response times of 0-20 s.The relay features a spring-type connection system for easy installation and maintenance. It includes two COs (current output) for Umin and Umax, providing accurate and timely information on the power supply's voltage levels.

The Siemens DS1-X ET200S Starter is a high-performance, expandable electromechanical device designed for use in brake control modules. With an adjustable range of 0.45 to 0.63A and a power output of 0.18 kW at 400V, this starter offers reliable performance and flexibility. It is compatible with AC-3 systems and is suitable for a wide range of applications where precise control and high reliability are essential. Key Features: Expandable electromechanical design Adjustable range: 0.45 to 0.63A Power output: 0.18 kW at 400V Compatible with AC-3 systems

TeSys K contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3 (4kW@400V). It provides a low consumption 24V DC coil with transient suppressor module, 1NO built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The Omron G3NA-210B-UTU 5-24VDC Solid State Relay is designed for efficient and reliable ON/OFF control in industrial environments. This 1-pole relay supports surface mounting and features zero crossing functionality, ensuring minimal electrical noise and enhanced performance. With a rated operational voltage range of 24 to 240 VAC and a control voltage range of 5 to 24 VDC, it offers versatile application possibilities.Engineered for durability, the G3NA-210B-UTU can handle up to 10 A of current at AC-1 operation, making it suitable for a wide range of industrial control systems. The relay includes a screw terminal type for secure and straightforward connections, and an LED indicator for easy status monitoring.Designed to operate in extreme conditions, this solid state relay functions within a temperature range of -30°C to 80°C, ensuring reliable performance in various environments. The compact dimensions (58 mm height, 43 mm width, and 27 mm depth) allow for easy integration into existing systems.The G3NA-210B-UTU is ideal for applications requiring precise control and robust performance, such as heating, lighting, and motor control systems. Its zero-crossing switching capability reduces electrical noise, enhancing the longevity and reliability of connected equipment.

The Pilz component number 774059 is a versatile and reliable industrial automation product designed to enhance the safety and efficiency of your production process. This compact and sturdy device features advanced monitoring and control capabilities, enabling it to detect and respond to potential hazards and malfunctions in real-time. With its intuitive interface and customizable settings, it can be easily integrated into your existing automation system and tailored to your specific requirements. Whether you need to monitor machine status, control access to hazardous areas, or optimize production throughput, the Pilz 774059 component provides a cost-effective and high-performance solution. Its robust construction and long service life make it an ideal choice for demanding industrial environments, ensuring maximum uptime and minimal maintenance. Trust Pilz for your industrial automation needs and experience the benefits of cutting-edge technology and expert support.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys F contactor, with its 3 poles and a rating of 265A/1000V AC-3, is designed for robust motor applications. It can handle power up to 132kW at 400V. This contactor offers a low sealed consumption coil that operates on 48V AC at frequencies ranging from 40 to 400Hz. The bolt terminals are suitable for connecting bars or cables with lugs, ensuring easy installation and maintenance. With its drawer-mounted coil design, this contactor provides convenience during installation and maintenance. It is also designed to operate reliably under high rates of up to 2400 cycles per hour and in environments with temperatures up to 55°C.The TeSys F contactor comes with a large selection of add-on blocks and accessories (to be ordered separately) for added functionality. It is certified to multiple standards including IEC, UL, CSA, CCC, EAC, and Marine, ensuring its compliance with various industry regulations. Additionally, it is Green Premium compliant, adhering to RoHS/REACh directives.

Introducing the TeSys K Contactor, a robust and efficient device designed to cater to motor control applications. This 3-pole contactor (3NO) is capable of handling up to 16A/690V AC-3, translating to a maximum power capacity of 7.5kW at 400V. Equipped with a 24V 50/60Hz AC coil and featuring a built-in 1NO auxiliary contact, this contactor ensures seamless operation while providing flexibility for various applications. It boasts screw clamp terminals for easy connection, making it user-friendly. Designed to withstand operating rates of up to 600 cycles per hour and environmental conditions up to 50°C, the TeSys K Contactor guarantees reliability and durability for standard applications. Its compact size (45mm width) allows for versatile mounting options, including DIN-rail or screw fixing. Certified under multiple standards such as IEC, UL, CSA, CCC, EAC, and Green Premium compliant (RoHS/REACh), this contactor is a testament to Schneider Electric's commitment to quality and sustainability.

TeSys LRD overload relays are designed to be used with TeSys D contactors to make a motor starter. This overload relay can be used with 9 amp through 38 amp TeSys D contactors. These differential thermal overload relays detect over currents in the lines to the motor. When an overcurrent is detected the overload relay working with the contactor will disconnect the power to the motor. This will minimize the damage to the motor windings. This overload relay has an adjustable trip current rating of 2.5 to 4.0 amperes. This trip current rating is calibrated per Class 10A. Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

The AC-3 Power Contactors are designed for high power applications, capable of handling up to 11kW at 400V. These contactors feature 2 Normally Open (NO) and 2 Normally Closed (NC) terminals, making them suitable for a wide range of industrial control systems. With a voltage rating of 230V AC at 50/60Hz, these contactors are designed to operate in various environments. They come with a removable auxiliary switch, which adds flexibility to your system design. The SZ S0 screw terminal design allows for easy installation and maintenance, while the 3-pole configuration ensures reliable power distribution.

TeSys F contactor, 3 poles (3NO), 330A/1000V AC-3, for motor applications up to 160kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).