Contactores y relés

The high power contactor is designed for AC-1 applications, capable of handling up to 440A at a maximum voltage of 440V. It features a wide-range coil voltage of 48-130V AC/DC, ensuring low power consumption while maintaining efficiency in operation. This model includes a built-in electronic coil with PLC output control and an auxiliary contact block comprising 1NO + 1NC, enhancing reliability. With an impressive maximum operating rate of 600 cycles per hour and a durability rating of 5 million mechanical cycles, this device is suitable for rigorous environments with temperatures ranging from -25°C to 60°C. The product also incorporates Local and Remote Contact Wear Diagnosis (CWD) as a standard feature, providing continuous monitoring with health and alarm indicators. Installation is simplified, allowing for mounting in any quadrant without the need to disconnect cables or busbars. The contactor can be directly mounted on a plate and supports bolted connections for power while utilizing spring terminals for control connections, all accessible from the front for quick replacements. It meets IP2X protection standards according to IEC 60529 and VDE 0106, ensuring safety in various conditions. Additionally, the product is multi-certified (CE, CB, CCC, cULus, EAC, KC, RCM, Marine) and adheres to Green Premium compliance, reflecting its sustainable design. For further details, the unique QR code offers instant access to comprehensive product information.

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 18A/690V AC-3 (7.5kW@400V). It provides low consumption 24V DC coils with transient suppressor module, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The contactor features three poles (3NO) suitable for motor control applications, supporting a maximum current of 9A at 690V in AC-3 mode, and 20A at the same voltage for non-inductive loads under AC-1 conditions. It operates with a 12V DC coil and includes one normally open auxiliary contact. The device is designed for installation on DIN rails or can be fixed directly to a plate, and has a compact width of just 45mm.This model operates efficiently within an ambient temperature range of -25°C to 50°C, and is capable of handling up to 600 cycles per hour. Its reliability is enhanced by multi-standard certifications including IEC, UL, and CSA, and it adheres to Green Premium standards, ensuring compliance with RoHS and REACh regulations.Noteworthy specifications include a rated insulation voltage of 690V and a rated operational current of 9A at 440V, alongside a rated breaking capacity of 110A at various voltages. The contactor is equipped with screw clamp terminals for secure connections and is capable of withstanding operational altitudes of up to 2000m without derating. The Designation Code is LP1K, confirming its classification.

The Diodes Protection Module for TeSys Deca Contactors is a crucial component that ensures the safety and longevity of your contactor. It's designed to protect against transient overvoltage in 24-250V DC control circuit voltage, making it an essential part of any industrial automation system.This module is specifically designed for LC1D80-D95 (3P) and LP1D40-D80 (4P) contactors. It's easy to install, with a screw fixing method and connection on coil terminals. The module is also RoHS/REACh compliant, ensuring it meets the highest standards of environmental responsibility.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The RCI484AC4 relay, part of the RIDERSERIES, is constructed with 2 CO contacts and includes a lockable test button. It operates at a rated control voltage of 24 V DC and supports a continuous current of 8 A, making it suitable for various control applications.Measuring 13 mm in width, 29 mm in height, and 26.7 mm in depth, this relay has a net weight of 18.672 g. The plug-in connection method allows for easy integration into existing systems, with a pitch of 5 mm.With a mechanical service life rated at 5 x 106 switching cycles for AC coils and 10 x 106 for DC coils, the relay ensures durability and reliability. The protective circuit includes a free-wheeling diode, and the status indicator features a green LED for visual feedback.In terms of insulation, the device complies with IEC 61810-1 and UL508 standards, with a dielectric strength of 5 kV for input/output isolation. Its operating temperature range spans from -40 °C to 70 °C, ensuring functionality across diverse environments. The relay is also rated for a maximum switching voltage of 240 V AC and can handle an inrush current of 15 A for up to 4 seconds.Designation Code: E224238.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200-208VAC, 25HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 25A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.15 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.71 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys K contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V), and for non-inductive load control applications up to 20A/690V AC-1. It provides a 24V DC coil with transient suppressor module, 1NC built-in auxiliary contact, connection by screw clamp terminals. For operating rates until 600 cycles/hour and environments until 50°C, it procures reliability and durability to standard applications. Very compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The interface plug-in relay is designed to operate at a control coil voltage of 120V AC and features 2 changeover contacts with a double pole double throw configuration, rated for 8A. This relay, part of the Harmony RSB series, facilitates installation in a variety of environments and enhances system reliability.With a compact design, the relay supports easy integration into enclosures, helping to streamline space requirements. It is rated IP40, ensuring protection against dust, and features a transparent cover for visual inspection of contact status. The relay has an operating temperature range of -40 to 70 °C, making it suitable for diverse operational conditions.Its electrical durability is rated for 100,000 cycles at 8A and 250V for normally open contacts, and 4A for normally closed contacts. The relay's shock resistance is rated at 10g when not operating, and 5g during operation, complying with IEC standards. Furthermore, it meets several certifications including EAC, CSA, and UL, ensuring adherence to quality and safety standards.

El relé de seguridad SIRIUS de Siemens es un componente robusto y fiable diseñado para mejorar la seguridad en aplicaciones industriales. Este dispositivo de la serie estándar cuenta con 3 contactos normalmente abiertos (NA) y 1 contacto normalmente cerrado (NC), lo que proporciona circuitos efectivos de habilitación y señalización de relés. Con una tensión de alimentación de control de 24 V CA/CC y conexiones de terminales de tornillo, garantiza una instalación fácil y segura.Diseñado para un alto rendimiento, el relé ofrece protección IP20 y es seguro para los dedos para evitar descargas eléctricas. Funciona de manera eficiente en una amplia gama de temperaturas, de -25 °C a +60 °C, y puede soportar temperaturas de almacenamiento tan bajas como -40 °C y tan altas como +80 °C. El relé está construido para soportar condiciones adversas, con una resistencia a las vibraciones de hasta 500 Hz y una resistencia a los golpes de 10 g durante 11 ms.Conforme a las normas IEC 60947-5-1 e IEC 61000, el relé de seguridad SIRIUS de Siemens es adecuado para entornos de Clase B, incluidos los entornos domésticos. Es compatible con el cableado relacionado con la seguridad de un solo canal y de dos canales, lo que garantiza flexibilidad y confiabilidad en diversas aplicaciones. El relé también cuenta con un Nivel de Integridad de Seguridad (SIL) 3 y un Nivel de Rendimiento (PL) e según la norma EN ISO 13849-1, con una Fracción de Falla Segura (SFF) del 99%.Con una vida útil mecánica de hasta 10 millones de ciclos de conmutación, este relé de seguridad está construido para durar. Cuenta con una capacidad de conmutación máxima de 5 A a 24 V CC y 5 A a 230 V CA para contactos NA, y 1 A a 24 V CC y 1,5 A a 230 V CA para contactos NC. El relé también incluye características esenciales como entrada de retroalimentación, entrada de inicio y diseño a prueba de circuitos cruzados.Ideal para su uso en aplicaciones críticas para la seguridad, el relé de seguridad SIRIUS de Siemens garantiza un rendimiento confiable y el cumplimiento de los estándares de la industria, lo que lo convierte en una valiosa adición a cualquier sistema de seguridad.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 80A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. When used with a 480VAC up to 150A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 175A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The universal plug-in relay is designed for applications requiring reliable control with a 12V DC coil voltage. It incorporates 2 changeover contacts (double pole double throw) with a maximum switching capacity of 2500 VA and an operating current of 10A. The relay's construction allows for installation in various positions and environments, providing a versatile solution for automation systems.With an operating temperature range of -40 to 55 °C and IP40 protection, it is suitable for harsh industrial conditions. The relay offers a lockable test button for simplified operation testing. Additionally, it supports hard-wired logic systems and is compatible with programmable logic controllers (PLCs), enhancing its utility in complex automation setups.Notably, the design includes a transparent cover, facilitating visual inspection of contact status. The dielectric strength ratings are significant, with 1500 V AC between contacts and 2500 V AC between coil and contact, ensuring safe operation. The product complies with various industry standards, including UL and CSA, and is classified under pollution degree 3.

The S12 contactor is a standard 3-pole, non-reversing device capable of handling a rated operation current of 400 A in AC-3 applications. It operates effectively at a rated operation power of 200 kW when connected to a 400 V AC supply. The contactor features a frame size of S12 and utilizes conventional screw terminals for busbar connections.With a rated control supply voltage of 110 V for both AC and DC applications, this device is optimized for versatility in various electrical systems. It includes 2 normally open (NO) and 2 normally closed (NC) auxiliary contacts, enhancing its utility in control circuits. The absence of suppression lugs should be noted, which are not included with the unit. The terminal connections comply with UL standards, specifically UL File E31519 in Volume 11 Section 4.

TeSys D contactor, 3 poles (3NO), for switching 3-phase capacitor banks up to 30kVAR@400V 50Hz (50kVAR@690V). It provides a 400V 50/60 Hz AC coil, 1NO+2NC instantaneous auxiliary contacts, with front mounted early make poles and pre-wired damping resistors for current limitation. For operating rates until 240 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (55mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA) and compliant with shunt capacitors standard IEC 60831, Green Premium product (RoHS/REACh).

TeSys F contactor, 3 poles (3NO), 780A/1000V AC-3, for motor applications up to 400kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 600 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The TeSys K Reversing Contactor, with its 3 poles (3NO), is designed to cater to a wide range of motor control applications. It can handle up to 9A/690V AC-3 (4kW@400V). The contactor comes equipped with a 24V DC coil, featuring a transient suppressor module, and includes 2NC built-in auxiliary contacts for enhanced functionality. The TeSys K Reversing Contactor is compact, measuring only 90mm in width, and can be mounted on DIN rails or via screw fixing. It offers pre-wired reversing power connections and mechanical interlock (without electrical interlocking) for ease of use. This contactor is certified under multiple standards including IEC, UL, CSA, CCC, EAC, and is Green Premium compliant (RoHS/REACh). With a maximum operating rate of 600 cycles/hour in AC-3 and an environment temperature tolerance until 50°C, the TeSys K Reversing Contactor ensures reliability and durability for standard applications. Its robust construction and high performance make it an ideal choice for various industrial and automation settings.

The TeSys Deca Contact Relay is designed for seamless integration into control systems, providing reliable motor control solutions. This 32A inductive 3-phase IEC contactor can be mounted on DIN rail or directly to a panel, making it adaptable to various applications.This contact relay is available in multiple ratings for inductive and resistive loads, with a maximum capacity of 150 full-load amps and 200 amps respectively. It offers both horsepower and Kw motor rating for international acceptance, ensuring compatibility across different power systems.The contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase, and 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, it can handle SCCR up to 85kA. With up to a 600VAC 80A Class J or CC fuse, it can manage SCCR up to 100kA.The contactor comes with a low consumption 24VDC coil and a transient suppressor module for enhanced performance. It also features one normally open and one normally closed auxiliary contact as standard, with the NC contact being mirror certified. Screw clamp terminals are used for load and auxiliary connections.The TeSys Deca Contact Relay is 3.35 inches tall, 1.77 inches wide, and 3.98 inches deep, weighing 1.18 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, as well as RoHS/REACh, making it a Green Premium product.

The Relay Module operates at a rated control voltage of 24 V DC ± 20% and features a single normally open (NO) contact. It utilizes AgSnO2 + W material for the contact, ensuring durability with a mechanical service life of up to 5 million switching cycles.With dimensions of 12.8 mm in width, 89.6 mm in height, and 87.8 mm in depth, it weighs 56 g. The module employs a screw connection for wiring, supporting a range of wire sizes from 0.14 mm² to 2.5 mm² (AWG 26 to AWG 14). The maximum tightening torque is set at 0.4 Nm.In terms of environmental compliance, the product adheres to CE, cULus, DNV GL, and EAC standards and is ROHS compliant. It is rated for operational temperatures between -40 °C and 60 °C and has a pollution severity level of 2. The relay can handle a rated switching voltage of 250 V AC and a maximum continuous current of 16 A, with an inrush current capability of 165 A for 20 ms and 800 A for 200 µs. The dielectric strength between input and output is rated at 1.2 kVeff for 5 seconds, ensuring reliable performance.The relay also includes protective features such as a free-wheeling diode and reverse polarity protection. It is classified under ETIM 6.0 and 7.0 as EC001437, and its operational reliability is supported by a green LED status indicator. The Designation Code for this product is E141197.

The vacuum contactor, with a frame size of S10, features a rated operational current of 265 amperes and supports AC-3 power ratings of up to 132 kilowatts at 400 volts. It incorporates 3-pole electronic connections and is designed for both AC and DC operations within a control voltage range of 21 to 27.3 volts. Auxiliary contacts include 2 normally open (NO) and 2 normally closed (NC), enhancing its functionality for complex applications.Utilizing a busbar connection and equipped with a 24 V DC PLC interface, this device allows for a straightforward integration into automated systems. The control voltage specifications ensure compatibility across various operational scenarios, while the contactor's construction adheres to high-quality standards, originating from Germany. The device also features a power loss of 12 watts per pole, which is dependent on the current, alongside a static power loss of 3.4 watts.

The REL-IR2/LDP- 60DC/2X21 is a plug-in industrial relay designed for high performance with an input voltage of 60 V DC. This device includes two changeover contacts and features a test button, status LED, and a freewheeling diode for enhanced functionality.With a mechanical service life of approximately 2 x 107 cycles, it operates at a 100% operating factor, ensuring reliability in demanding environments. The relay supports a range of input voltages from 46.8 V DC to 117 V DC and exhibits a typical response time of 13 ms and release time of 14 ms.Constructed with basic insulation and rated insulation voltage of 250 V AC, it adheres to the IEC 60664 standards. The relay also features a maximum switching voltage of 250 V AC/DC and can handle a limiting continuous current of 12 A. Its compact dimensions of 21.2 mm width, 27.5 mm height, and 35.6 mm depth allow for versatile mounting options.Designed to operate in ambient temperatures ranging from -40 °C to 70 °C, it is suitable for a variety of applications, including harsh environments as specified by ISA-S71.04. The relay's degree of protection is classified as RT I, further enhancing its durability.